273 systems engineering intern jobs found

Background The U.S. Nuclear Regulatory Commission (NRC) is proud to be ranked among the best places to work for compensation, work-life balance, and performance for mid-sized agencies in the Federal Government.     The NRC protects public health and safety and advances the nation’s common defense and security by enabling the safe and secure use and deployment of civilian nuclear energy technologies and radioactive materials through efficient and reliable licensing, oversight, and regulation for the benefit of society and the environment.   These two (2) positions are located in Nuclear Reactor Regulation (NRR), Division of Risk Assessment and Safety Systems (DRSS), Nuclear Engineering Branch B (NEBB) and Office of Advanced Reactors (OAR).   Duties The successful candidate is responsible for the following as pertains to reactor core or fuel design, nuclear methods, reactor systems and evaluations of operating performance for operating or new...

Basic Qualifications Candidates should demonstrate a thorough understanding of engineering technology.  Engineering Interns must be enrolled in an accredited degree program in Computer Engineering, Systems Engineering, Software Engineering, Electrical Engineering, Mechanical Engineering or other related scientific or technical discipline with a preference for a standing of a junior or higher.     CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position REPRESENTATIVE DUTIES AND TASKS: Apply your classroom-learned skills to a program supporting the defense of our country. GDMS has an immediate opening...

Basic Qualifications SkillBridge Eligibility: Has served at least 180 days on active duty Is within 12 months of separation or retirement Will receive an honorable discharge Has taken any service TAPS/TGPS Has attended or participated in an ethics brief within the last 12 months Received Unit Commander (first O-4/Field Grade commander in chain of command) written authorization and approval to participate in SkillBridge Program prior to start of internship. Responsibilities for this Position If you’re looking for a chance to experience civilian life and continue your mission to support our nation, then the General Dynamics Mission Systems Military Internship Program is the amazing challenge you’re looking for! At General Dynamics Mission Systems, you’ll learn from the best, those teams that create the technologies, products and services that help our nation’s heroes keep our nation safe. We are operating as an approved...

Position Summary Evergreen (Pipeline) Requisition This requisition is used to build a pipeline of qualified candidates for future opportunities. While there may not be an immediate opening, candidates will be considered as positions become available based on their qualifications and program needs.   Odyssey is seeking experienced Avionics Integration Engineers at various levels to support the Air Force Life Cycle Management Center Intelligence, Surveillance, Reconnaissance (ISR) and Special Operations Forces (SOF) Directorate (AFLCMC/WI) at Wright Patterson AFB, OH .  AFLCMC/WI is responsible for equipping warfighters to win the fight.  The Directorate executes a $22 billion acquisition portfolio developing, producing, testing, modifying, fielding, and supporting Air Force ISR and SOF platforms, and related sub-systems.    This role assists in providing rotary wing avionics engineering, consultation, and support to design, develop, manufacture,...

Description SAIC is seeking a Mechanical Engineer to serve as an In-Service Engineering Agent (ISEA) in support of hypersonic weapons systems deployed aboard the Zumwalt-class DDG-1000 destroyer and Virginia-class submarines. This position plays a critical role in ensuring operational readiness, technical integrity, and lifecycle sustainment of cutting-edge hypersonic strike capabilities. As an ISEA, you will serve as a key technical authority bridging the gap between the engineering baseline and fleet operations. You will work collaboratively with Fleet Support Representatives, government program offices, and cross-functional engineering teams to ensure delivered systems align with system and subsystem requirements throughout their operational lifecycle. NOTE: This position is 100% remote/work from home. Monthly travel to Crane, IN is required. What You'll Do: Serve as a primary In-Service Engineering Agent (ISEA) for hypersonic weapons systems, providing mechanical...

Description SAIC is seeking a talented and motivated Advanced Packaging Engineer to support cutting-edge missile system hardware design and analysis efforts. In this role, you will collaborate with multidisciplinary engineering teams to develop, analyze, and validate advanced microelectronics packaging solutions for complex defense systems. This position offers a hybrid work schedule; however, candidates must reside within commuting distance of Crane, IN. JOB RESPONSIBILITES: Support mechanical design and analysis of missile system hardware and microelectronics packaging and assembly Perform mechanical modeling and simulation activities, including finite element analysis (FEA), thermal fatigue, shock and vibration analysis, and MATLAB-based modeling Apply systems engineering principles throughout all stages of the product lifecycle, including requirement development, verification, and validation Participate in and support Systems Engineering Technical Reviews,...

Description SAIC is seeking an Electrical Engineer to support the US Navy in Crane, IN. NOTE: This is a hybrid position requiring the candidate to be onsite approximately 3 days a week. JOB DESCRIPTION: This position is responsible for providing engineering, modeling and analysis support for prime contractor led design and development of missile and guidance electrical subsystems and sub-assemblies for the Fleet Ballistic Missile D5 Life Extension 2 (D5LE2) program. JOB RESPONSIBILITIES: The selected candidate will support electrical modeling and simulation of modern package configurations and interconnects under consideration for the D5LE2 program. Qualifications REQUIRED EDUCATION AND EXPERIENCE: Bachelor's degree in engineering and 3 or more year of experience Understanding of the systems engineering process Understanding of requirements and architecture development/generation Electrical modeling and analysis using tools such as Multisim, PSpice,...

Description SAIC is searching for a motivated, career and customer-oriented Software Testing Prinicpal who performs high-level, day-to-day software testing solutions to join our team and begin an exciting and challenging career. This is a 100% Remote role. Job Description Develops and executes test plans, test cases, and test procedures to ensure that all information systems products and services meet organization standards and end-user requirements. Develops test plans, test schedule, and approach. Writes test cases and scripts and identifies data for test scenarios. Conducts a walk through on test case/script with Test Managers, Requirement Leads, Project Managers, and Development Leads. Performs and leads tests of software and/or IT systems to ensure proper operation and freedom from defects. Performs verification activities on work products using defined methods, procedures and criteria with an appropriate verification environment. Documents and communicates...

Description SAIC is seeking an experienced and technically skilled Senior Systems Engineer to support NSWC Crane and the Sea-Launched Cruise Missile - Nuclear (SLCM-N) program. In this role, you will perform a broad range of systems engineering activities in support of one of the Department of Defense's highest-priority nuclear modernization programs. The successful candidate will assist the Navy is directing and managing a competitive prototyping development effort and apply a complete understanding of systems engineering principles to deliver innovative, technically sound solutions that meet mission requirements within schedule and cost constraints. The Senior Systems Engineer will perform systems engineering activities including concept of operations formulation, requirements definition, analysis and engineering, system architecting, system analysis and design, interface and data architectures, validation and verification, systems integration, system and operational...

Description SAIC is seeking an experienced and technically skilled Senior Systems Engineer to support NSWC Crane and the Sea-Launched Cruise Missile - Nuclear (SLCM-N) program. In this role, you will perform a broad range of systems engineering activities in support of one of the Department of Defense's highest-priority nuclear modernization programs. The successful candidate will assist the Navy is directing and managing a competitive prototyping development effort and apply a complete understanding of systems engineering principles to deliver innovative, technically sound solutions that meet mission requirements within schedule and cost constraints. The Senior Systems Engineer will perform systems engineering activities including concept of operations formulation, requirements definition, analysis and engineering, system architecting, system analysis and design, interface and data architectures, validation and verification, systems integration, system and operational...

Description SAIC is seeking a highly experienced and expert-level Logistics Principal to provide integrated product support and lifecycle logistics leadership for NSWC Crane and the Sea-Launched Cruise Missile - Nuclear (SLCM-N) program. In this senior role, you will serve as a subject matter expert and organizational consultant, contributing to the development of new logistics concepts, techniques, and standards that support the long-term sustainment and operational readiness of this critical nuclear deterrence capability in a competitive prototyping developmental environment. The successful candidate will exercise considerable latitude in determining technical objectives and will provide expert guidance to program leadership and junior team members. Key Responsibilities Perform system fault analysis, life cycle maintenance planning, and integrated product support (IPS) for the SLCM-N program Assist the Navy in the application and implementation of the 12 DoD...

Description SAIC is seeking an SCA Engineering Technician IV-2M to support the US Navy in Crane, IN. Position Description: Perform Miniature/Microminiature Electronics Repair (2M) supporting testing and repair of Circuit Card Assemblies (CCA) and Electronic Modules (EM). Performs corrective maintenance on circuit cards and electronic modules by troubleshooting and repairing the faulty cards and modules . Testing and evaluation: Conducting tests and experiments, analyzing data, and documenting findings. Conduct routine repair, retrofit, systems integration, calibration and testing; in-line repair and testing; operation of test equipment Installing, maintaining, repairing, and modifying various types of equipment, including electrical, electronic, and mechanical systems. Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions. Conduct or...

Description SAIC is looking for an Engineering Technician IV in Bedford, IN to support the U.S. Navy. This position will need someone experienced with tactical communications equipment, who knows e-mail etiquette and can communicate with both CIV and CTR. This position is perfect for someone that is organized and willing to work in small teams and with government oversight. Job duties include but are not limited to: Using hand tools and power tools to assemble according to engineering drawings. Using test equipment to test and analyze power, Ethernet and RF cables. Building and operating tactical communication systems. Performing tasks such as integration of system components, modifications to systems, and testing system functionality. Analyzing and implementing procedures and processes for the effectiveness, efficiency and productivity of the programs/projects. Using technical manuals related to equipment to create processes/procedures...

Description SAIC is seeking a Technical Documentation Specialist to to support the development and maintenance of high-quality technical materials in Crane, IN. This role includes researching, collecting, analyzing, and organizing technical information while ensuring all documentation adheres to government specifications for accuracy, clarity, and consistency. Key Responsibilities Include: Editing and formatting technical documents Creating and manipulating graphics and illustrations Providing desktop publishing support Participating in project and review meetings Maintaining organized records Performing clerical and administrative duties, and Collaborating with cross-functional teams, including technical writers, engineers, and stakeholders Qualifications Required Education and Experience: Associate's degree in a related discipline and 3 years of related experience. Experience in lieu of a degree will be considered Must be able to obtain a Secret...

Description SAIC is looking for an Engineering Technician III in Crane, IN to support the U.S. Navy. JOB RESPONSIBLITIES: Supporting the battery testing for the Power & Energy support, for lead acid battery technical support, including working with electrical systems for high voltage items Report data, results, and analysis to project representatives for batteries, battery systems, battery chargers, and test equipment Maintain test equipment to ensure all test events are acceptable Follow standard operating procedures for lead acid batteries and the test plans Training that will be completed after hiring will include: National Fire Protection Association (NFPA) 70E, Standard for Electrical Safety in the Workplace Overhead Crane and Forklift Operation Certification Forklift Certification, within 6 months of starting CPR Training, within 6 months of starting AFIB Training, within 6 months of starting Lock Out Tag Out...

Description SAIC is seeking a Configuration Analyst to assist the NSWC Crane Hypersonic Systems Engineering Team in developing and implementing Configuration Management (CM) processes, authoring documentation/policy, and applying CM best practices for a hypersonic developmental program working to establish formal processes as configuration responsibility is transitioned from the Lead Systems Integrator to the Government. NOTE: Position will either be staffed onsite at Crane or remotely in Washington, DC or Huntsville, AL. JOB DESCRIPTION: The Candidate will assist the Crane CPS CM lead in formulating big picture strategic ideas to drive CM strategy for the program (including CM processes for the CPS Hardware-In-The-Loop (HWIL) test environment) in a rapid development environment; enable processes that will prepare the program for weapon system sustainment requirements; help the program obtain technical and data driven solutions; and evaluate and recommend engineering, CM,...

Description SAIC is seeking a Configuration Analyst to assist the NSWC Crane Hypersonic Systems Engineering Team in developing and implementing Configuration Management (CM) processes, authoring documentation/policy, and applying CM best practices for a hypersonic developmental program working to establish formal processes as configuration responsibility is transitioned from the Lead Systems Integrator to the Government. NOTE: Position will either be staffed onsite at Crane or remotely in Washington, DC or Huntsville, AL. JOB DESCRIPTION: The Candidate will assist the Crane CPS CM lead in formulating big picture strategic ideas to drive CM strategy for the program (including CM processes for the CPS Hardware-In-The-Loop (HWIL) test environment) in a rapid development environment; enable processes that will prepare the program for weapon system sustainment requirements; help the program obtain technical and data driven solutions; and evaluate and recommend engineering, CM,...

Description SAIC has an exciting opportunity for a Sr. Business Process Analyst to join a high-performance team. Tremendous growth opportunity working within the VA cloud ecosystem We're looking for an analyst who can work at scale and with autonomy, who can be a trusted advisor to our client. This is a 100% Remote role. Job Description Provides expertise on continuous process improvement strategies, organizational redesign, change management projects, and performance measures for basic business process engagements. Defines and develops business processes, policies, roles and responsibilities, and performance metrics. Conducts analysis of business processes including: Current state analysis Gap analysis Benchmarking Best practices identification Organizational assessment Other related tasks Plans and implements process improvements including: Future state design Change management Transition planning Interfaces...

Description SAIC is seeking a Mechanical Engineer to support the US Navy in Crane, IN. JOB DESCRIPTION: You will be part of a collaborative team of engineers and technicians working to support sustainment activities within the Strategic Systems unit at NSWC Crane. This role will be focused on adapting and updating existing assets and infrastructure for the Conventional Prompt Strike missile systems used on the new Columbia/Dreadnaught class submarines. You will primarily work on the Crane Naval Base directly supporting the Government Customer, with occasional trips to SAIC's facility in Bedford, IN. JOB RESPONSIBILITES: Demonstrate strong organizational skills and the ability to work on multiple tasks concurrently with changing deadlines and priorities Interact directly with customers to extract requirements, generate a plan, and report status Prepare Engineering Change Proposals (ECPs) to revise official drawings Conduct Failure Analysis and recommend...

Description SAIC has an opening for a Principal Electrical Engineer as part of a team providing hardware and software development solutions to the US Army Combat Capabilities Development Command Aviation & Missile Center at Redstone Arsenal in Huntsville, AL. Job Description: Use your analytical engineering skills to identify and manage electrical/electronic requirements and translate those requirements into system architecture, hardware and firmware designs for special purpose military weapon systems. Typical Duties: Perform power budget analysis for fixed and mounted computing environment systems Perform circuit design, analysis, simulation and component selection for high availability, high reliability and low Size, Weight and Power (SWAP) environments Direct design verification testing (DVT) of prototype electronic designs Generate and review documentation for a Technical Data Package (TDP) associated with the design, development, unit test, and integration of...