23 level 3 jobs found

Description: You will be the Utilities & Mechanical Systems Engineer - Level 3 for the Utility Systems – Vehicle Systems team which is responsible for designing, improving, and sustaining utility and fluid systems on AMMM aircraft such as the C‑130 and C‑5. What You Will Be Doing As the Utilities & Mechanical Systems Engineer - Level 3 you will be responsible for delivering high‑impact mechanical and fluid‑system solutions that keep our transport aircraft mission‑ready. Your responsibilities will include: Design, analyze, and refine mechanical and fluid utility systems for C‑130 and C‑5 platforms. Provide troubleshooting, production support, and sustainment solutions for flight controls, landing gear, fuel, hydraulic, and related subsystems. Generate and update engineering drawings, specifications, and technical documentation. Conduct lab testing, investigate non‑conformances, and implement corrective actions. Coordinate with suppliers,...

General Summary Do you meet our minimum hiring standards? Check  here  before applying. An Ada County Emergency Vehicle Upfitter Technician performs upfits to all Ada County Sheriff’s Office and/or Ada County’s vehicles.  Work is performed under well-established manufacturer’s guidelines and safety guidelines set forth by the Ada County Sheriff’s Office. The scope of work requires a high degree of accuracy, organization and attention to detail. This position is located in the Ada County Sheriff's Office, Administrative Services Bureau.  SHIFT INFORMATION The shop operates seven days a week, with staff scheduled to work four 10-hour shifts. BENEFITS Low cost medical, dental, and vision insurances Idaho PERSI retirement plan Deferred Compensation plan 457(b) with a County match of up to 3% Flexible Spending Accounts – Health and Dependent Care Post-Employment Health Plan – 50% of unused sick leave above 240 hours Employee Assistance Program (EAP) No...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. The designer will work closely with engineers to provide component or portions of system...

Description: You will be the Mechanical Engineering Design Sr for the Future Terminal Interceptor capability development team. Our team is responsible for developing key technologies to support the follow-on upper tier missile program to THAAD. The next generation missile system will play a critical role to our Warfighter's ability to defeat the growing complex threats. The vehicle will be enabled by the next generation seekers, controls, avionics, and communications subsystems. What You Will Be Doing: As the Mechanical Engineering Designer, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: * Developing and generating CREO layouts and detailed drawings for...

Description: You will be the Fuel System Engineer for the Utility Systems IPT which is responsible for... What You Will Be Doing As the Fuel System Engineer you will be responsible for delivering fluid and mechanical engineering solutions within advanced development programs, focusing on aircraft fuel system design, analysis, and aerial refueling. Your responsibilities will include: Lead system‑level fuel design and analysis to meet performance, safety, and regulatory requirements. Collaborate with cross‑functional IPT members to translate customer requirements into integrated system solutions. Develop and validate aero‑refueling concepts and support test planning and execution. Manage technical trade studies balancing schedule, cost, and risk. Provide technical guidance and documentation throughout the product lifecycle. What’s In It For You We are committed to supporting your work‑life balance and overall well‑being, offering flexible...

Description: What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. The Work We are seeking an experienced Mechanical Engineer to support multiple programs in the Integrated Warfare Systems & Sensors business. The candidate will be expected to support the mechanical design, development and analyses for the cabinets and electronics design group across various SPY-7 and Aegis programs. The selected candidate will apply emerging technical expertise in mechanical engineering and have applicable knowledge of other related disciplines. Additionally, the candidate will support the successful design and analyses of cabinet assemblies to achieve major organizational objectives. The selected candidate may represent the organization as a technical contact on...

Basic Qualifications Bachelor's degree in Mechanical Engineering, or a related Science, Engineering or Mathematics field, plus a minimum of 5 years of relevant experience; or Master's degree plus a minimum of 3 years of relevant experience.   CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As a Structural-Mechanical Engineer for Intelligence Systems, you will be responsible for performing structural analysis using applicable material resources, methods, and standards; perform design and development of mechanical systems; and carry out other tasks as required...

Description: You will be the Senior Mechanical Engineer for the Mechanical Design Team. Our team creates and delivers high performance mechanical solutions for advanced defense systems, turning program requirements into robust, producible hardware. What You Will Be Doing As the Senior Mechanical Engineer you will own the end to end design of complex mechanical components, translating multidisciplinary requirements into detailed 3 D models and production ready drawings. You’ll work side by side with peers, configuration management, and manufacturing to keep programs on schedule and on budget. Your responsibilities will include: • Developing mechanical designs of varying complexity using solid modeling tools (PTC Creo) and producing accurate engineering work products. • Reviewing and integrating requirements from stress, dynamics, systems, thermal, manufacturing, and other disciplines into your designs. • Applying Geometric Dimensioning & Tolerancing (GD&T) to ensure...

Description: Lockheed Martin Missiles and Fire Control is looking for an experienced Mechanical Design Engineer to support development and production of a missile system. What You Will Be Doing: As the Mechanical Engineering Designer Staff, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: Developing and generating CREO layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM Coordinating the IPT team, suppliers, GSC, electronic packaging, optics, and structural/thermal/material analysts to ensure design excellence...

Description: Lockheed Martin Missiles and Fire control is looking for an experienced mechanical engineering to support the SNIPER sensor program. As a Mechanical Engineer, you will be responsible for the creation, coordination, and release of mechanical design artifacts that feed into the Sniper Program. You will work side by side with other engineers, production planners, and the global supply chain to address production delays, yield issues and failure investigations to support the continued success of the program. Your responsibilities will include: • Generate complete, release ready engineering documents (drawings, BOMs, assembly parts lists) for fabrication and procurement. • Perform tolerance stack up and fit analyses to ensure manufacturability and reliability of mechanical components. • Conduct design reviews, incorporate feedback, and secure formal engineering release approvals. • Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM...

Description SAIC is currently seeking a mid to senior level Engineering Technician who is looking for a growth opportunity as a technician at an industrial/engineering/testing site in Newport, R I. The candidate will work within a multidisciplinary team of electrical & mechanical engineers and technicians to support the electrical and mechanical maintenance, calibration, configuration, and testing of an advanced Naval Test Facility. The Acoustic Test Facility (ATF) is a specialized facility that performs testing and characterization of naval systems. The primary work focus will involve the maintenance, setup, breakdown, and repair of mechanical and electrical test equipment and facility infrastructure including fluid and material handling, industrial equipment, data acquisition, signal processing and complex test and automation systems. The candidate must be self-motivated, accountable, and present themselves professionally in front of customers and peers....

Description: As a member of the SOFGLSS Lockheed Martin Team supporting the warfighter the Aircraft Mechanic II performs installation, adjustment, alignment and troubleshooting for final operational and functional testing on major aircraft weapon systems, assemblies and components for the C-130 aircraft. What You Will Be Doing As an Aircraft Mechanic II, you will be responsible for: • Inspects, troubleshoots malfunctions, rigs, repairs and modifies aircraft structures, structural components and aircraft systems of moderate difficulty. • Maintains and repairs aircraft components including but not limited to landing gear, flight surfaces and controls, anti-icing, engines, hydraulics, pneumatics, fuel systems, ventilation, heating and cooling systems and mechanical components. • Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions. • Applies required expertise in restoring equipment condition and or operation; applies...

Description: You will be the Mechanical Design Engineer Sr for an Integrated Air and Missile Defense development team. Our team is responsible for designing and producing key components of the missile system, including the missile interceptor and launchers. What You Will Be Doing As the Mechanical Engineering Designer Sr, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: •Developing and generating CREO layouts and detailed model-based designs (MBD) for ICDs, components, sub-assemblies, assemblies, and integration test articles •Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM •Coordinating with the IPT team,...

Description: You will be the Mechanical Engineering Designer Sr for an Optical Sensor System. Our team is responsible for developing and implementing detailed designs and layouts of optical sensors, structures, and subassemblies, driving innovation and excellence in the field. What You Will Be Doing: As the Mechanical Engineering Designer Sr, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: * Developing and generating CREO layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles * Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM * Coordinating with the IPT team,...

Description: You will be the Mechanical Design Engineer Sr for an Air Dominance program. Our team is responsible for producing design key components of the missile system and associated test equipment. What You Will Be Doing As the Mechanical Design Engineer Sr you will be responsible for the design, development and improvement to mechanical fixtures and automated test equipment for production test. They will also work with a cross-functional team to design, fabricated, and checkout test fixtures and equipment prior for implementation in a production environment. This position supports the Air Dominance Weapon System program in Orlando, FL. Your responsibilities will include: •Developing and generating CREO layouts and detailed drawings for mechanical fixtures used in the production test environment •Building BOMs, creating parts, assemblies, and design documentation of mechanical and electromechanical components and assemblies within Windchill PLM •Supporting &...

Description: You will be the Fuel System Engineer for the Utility Systems IPT which is responsible for... What You Will Be Doing As the Fuel System Engineer you will be responsible for delivering fluid and mechanical engineering solutions within advanced development programs, focusing on aircraft fuel system design, analysis, and aerial refueling. Your responsibilities will include: Lead system‑level fuel design and analysis to meet performance, safety, and regulatory requirements. Collaborate with cross‑functional IPT members to translate customer requirements into integrated system solutions. Develop and validate aero‑refueling concepts and support test planning and execution. Manage technical trade studies balancing schedule, cost, and risk. Provide technical guidance and documentation throughout the product lifecycle. What’s In It For You We are committed to supporting your work‑life balance and overall well‑being, offering flexible...

Description: WHAT WE'RE DOING At Lockheed Martin Rotary and Mission Systems, we are inspired by innovation and integrity. We apply the highest standards of business ethics and creative thinking to achieve our mission and empower our employees. THE WORK Receive sketches, descriptions (verbal or written), or conceptual CAD input and design complete mechanical equipment and mechanical features of electronic equipment for end‑item projects. Participate in design for proposals, 3‑D printing, IRAD, prototypes, or engineering development. Prepare calculations, layouts, details, and assemblies—including 3‑D models, 2‑D drawings, parts lists, and bills of material—to ensure designs meet ASME drafting, modeling, and drawing requirements and adhere to company standards for simplicity, manufacturability, and cost‑effectiveness. Sign off drawings as the party responsible for drafting accuracy and review the work of other drafting personnel. Operate computer‑aided design tools as required....

Description: You will be the Mechanical Engineering Designer Staff for an Advanced Programs weapon program supporting Unmanned Aerial Systems (UAS) development. Our team is responsible for developing and implementing detailed designs and layouts of the air vehicle system, driving innovation and excellence in the field. What You Will Be Doing: As the Mechanical Engineering Designer Staff, you will be responsible for leading the mechanical design in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: * Developing and generating CREO layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles * Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM...

Description: You will be the Mechanical Design Engineer Sr for an Integrated Air and Missile Defense - Advanced Programs development team. Our team is responsible for designing and producing key components of the missile system, including tactical RF sensor and structural hardware. What You Will Be Doing As the Mechanical Engineering Designer Sr, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: •Developing and generating CREO layouts and detailed model-based designs (MBD) for ICDs, components, sub-assemblies, assemblies, and integration test articles •Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM •Coordinating...

Basic Qualifications Requires a Bachelor’s degree in Mechanical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.     CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required at time of hire.  Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES:   As a Structural-Mechanical Engineer for Intelligence Systems, you will be responsible for performing structural analysis using applicable material resources, methods, and standards; perform design and development of mechanical systems; and carry out other...