61 jobs found

Description: The coolest jobs on this planet… or any other… are with Lockheed Martin Space. Lockheed Martin is a pioneer, partner, innovator, and builder. Our amazing people are on a mission to make a difference in the world and every single day we use our skills and experiences to create, design, and build solutions to some of the worlds’ hardest engineering problems. Do you want to join a team where employees envision the impossible, perform with excellence, and build incredible products? The Payload Launch Sites Support Services (PLSSS) Program within SSC provides all the launch processing support functions for the Office of Space Launch (OSL). One of the program’s two primary operating locations is Cape Canaveral Space Force Station, FL. Key elements of the PLSSS program scope include satellite launch processing, satellite transport operations, satellite propellant loading operations, clean room operations, satellite processing and support facilities O&M, and...

Description: You will be a Engineering Aide at Lockheed Martin, turning engineering drawings into high quality electronic and electro mechanical assemblies. Our team supports both Engineering and Manufacturing Production, ensuring reliable hardware for critical defense programs. What You Will Be Doing As a Engineering Aide you will be responsible for building circuit cards, and wiring harnesses, then integrating them into single or multi bay cabinet units. You will work independently while collaborating closely with Engineers, Draftsmen, Procurement, and Quality Inspectors to keep projects on schedule and on spec. Your responsibilities will include: • Placing and soldering components on circuit cards and sub-assemblies according to blueprints, schematics, and engineering guides. • Fabricating wiring harnesses, including connector pinning, de pinning, and installation of mounting hardware. • Assembling lower-level builds into complete cabinet assemblies for delivery to...

Description: You will be the Assembly Inspector for the Assembly Inspection Team. Our team is responsible for ensuring that every component that leaves our facility meets the highest standards of quality and safety. What You Will Be Doing As the Assembly Inspector you will be responsible for conducting thorough inspections of assembled components during the second shift, ensuring compliance with engineering specifications and safety standards. Your responsibilities will include, but are not limited to: - Perform visual and dimensional inspections of parts and assemblies. - Document inspection results and non‑conformances in the tracking system. - Collaborate with production personnel to resolve quality issues. - Maintain calibrated inspection tools and equipment. - Generate daily quality reports for management review. Why Join Us The ideal candidate is detail‑oriented, collaborative, and committed to delivering excellence. This role offers the chance to impact product...

Description: We are hosting a Lockheed Martin Space In-Person hiring event in the middle of June and it is in the vicinity of King of Prussia, PA. This event will be by invitation only and the exact date and location will be disclosed at a later date. The Electronics Engineer & Electrical Engineer roles do require a clearance to start. Please apply to be considered. Everyone knows how hard it is to get an interview with Lockheed Martin. Those that apply and get selected to attend will get the chance to meet with multiple managers as well as senior managers. This is your chance to meet face to face with our hiring team. These events have helped many individuals enhance the direction of their career. :) This hiring event is for experienced professionals and is for external candidates only. We are hiring levels 2-5. If you are interested in joining Lockheed Martin as a electronics engineer or electrical engineer, please apply to this requisition. Basic...

Description: Come join Lockheed Martin in The Last Frontier! We are currently seeking a dedicated Aircraft Electrician to join our dynamic team, focusing on the F-22 aircraft. The vast wilderness of Alaska offers a virtually unlimited playground for the outdoor enthusiast, while nearby Anchorage provides the same amenities you would find in any large city. This position is located at Joint Base Elmendorf-Richardson, Alaska supporting the F-22 modification line. This pivotal role involves a broad spectrum of responsibilities. What You Will Be Doing: Some of the job requirements & responsibilities include but are not limited to: - Services, repairs, and overhauls F-22 aircraft electrical & avionics systems to ensure airworthiness. - Repairs, replaces, and rebuilds aircraft electrical/avionics system and components. - Incorporate engineering changes. Replaces and repairs worn or damaged components. - Adjusts, repairs, and replaces electrical wiring system and...

Description: You will be the In-Process Build Inspector for the Lockheed Martin Missiles and Fire Control (MFC) team. Our team is responsible for ensuring the quality and functionality of electrical, electronic, and mechanical systems, among others, to meet company and customer requirements. What You Will Be Doing As the In-Process Build Inspector you will be responsible for conducting in‑process inspections that verify assemblies meet engineering specifications and performance standards. Your responsibilities will include, but are not limited to: Perform detailed inspections of electrical, electronic, and mechanical components during build. Compare work against drawings, specifications, and test data. Document findings and generate non‑conformance reports. Collaborate with engineers and production staff to resolve quality issues. Support continuous‑improvement initiatives to enhance product reliability. Why Join Us The ideal candidate...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary: SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. SAIC is looking for someone to support the MK710 program here at the SAIC Middletown office. The job will entail a complex/detailed troubleshooting effort along with full redesign engineering effort. Location: The work will be at both 28 Jacome Way, Middletown, RI, and the Naval Undersea Warfare Center (NUWC) Division Newport. Work Schedules: Flexible work schedule...

Description SAIC is searching for a well-organized, reliable electronics technician to join our excellent company. The job includes diagnosing and repairing electronics, reading manuals and installing new equipment, performing routine servicing and inspections, assisting with electronic upgrades, and reporting to senior management. The candidate will be responsible and provide excellent service and manage electronic systems and equipment efficiently. Job Duties Include: Maintenance & Repair: Diagnosing, repairing, and testing electronic equipment, circuit boards, and systems. Installation & Fabrication: Assembling, installing, and modifying electronic, electrical, and control systems. Troubleshooting: Using tools such as soldering irons, multimeters, and oscilloscopes to locate and fix faults. Documentation & Reporting: Creating maintenance reports, updating manuals, and documenting repairs. Ensuring compliance with established technical standards, safety...

Description SAIC is seeking a dedicated and hardworking Production Laborer with experience to join our team at the Bedford, IN location. This role involves preparing and performing sandblasting operations on various materials to meet production standards. The ideal candidate will ensure that all work is completed with high-quality standards, following safety protocols, and meeting production deadlines. Key Responsibilities: Operate sandblasting equipment to clean, smooth, or finish surfaces of materials such as metal, concrete, or other industrial products. Prepare workpieces by masking off areas that should not be blasted and ensuring proper alignment. Monitor equipment during sandblasting processes, making adjustments as necessary to ensure optimal performance. Inspect finished surfaces to ensure they meet the required specifications and quality standards. Maintain equipment, perform routine cleaning, and report any issues or malfunctions to management. Follow all...

Description SAIC is seeking a dedicated and hardworking Production Laborer with experience to join our team at the Bedford, IN location. This role involves preparing and performing sandblasting operations on various materials to meet production standards. The ideal candidate will ensure that all work is completed with high-quality standards, following safety protocols, and meeting production deadlines. Key Responsibilities: Operate sandblasting equipment to clean, smooth, or finish surfaces of materials such as metal, concrete, or other industrial products. Prepare workpieces by masking off areas that should not be blasted and ensuring proper alignment. Monitor equipment during sandblasting processes, making adjustments as necessary to ensure optimal performance. Inspect finished surfaces to ensure they meet the required specifications and quality standards. Maintain equipment, perform routine cleaning, and report any issues or malfunctions to management. Follow all...

Description: Perform visual inspection and testing operations on aircraft electrical and electronic systems. Follow general instructions, standard inspection procedures, engineering drawings, engineering specifications, check sheets, and other written or oral instructions to perform standard electrical inspection and testing operations. Utilize Electronic Operation Sheet System (Solumina) for accountability of all assembly/inspection operations and test requirements. Inspect systems and components for physical conditions, proper identification, completion and installation of all parts and assemblies, satisfactory workmanship. Check for broken strands in wiring, sufficient strain relief, proper mechanical connection, identification, and condition of plugs, wiring, and insulation. Conduct high potential and insulation resistance test on fuel gage wiring antenna cables, as occasion requires. Document Non-Conformances utilizing Electronic Documentation System (Solumina) on...

Position: Hardware Engineer Job Description: What You'll Be Doing: Gather requirements and finalize the architecture for the next-gen HMI module based on various SoCs including Qualcomm and NXP, Reneses, ESP Electronics Design & Development, select components and design schematics, collaborate with customer on component placement and PCB size. Do layout design and high-speed interface guidelines, perform signal integrity, power integrity, and thermal analysis and review Gerber files. Testing Design sensor boards (Motion, Light, Accelerometer, Temperature, Gyroscope, Magnetometer, calibrate sensors) and integrate with HMI Module. Protocol experience in SPI, I2C, Serial, UART, USB, DSI, CSI Coordinate with fabrication, assembly, and integration teams, conduct bring-up, functional, EDVT, thermal, and performance testing. What We Are Looking For: Experience / Education Typically requires a 4 year degree in   electrical/electronics   and a minimum of 8...

Position: Quality Inspector I Job Description: Arrow Electronics | Reno, NV Shift:  8:30 AM – 5:00 PM, Monday–Friday. Hourly Rate: $22.50 USD Hourly Pay: up to $25.00 USD for hours worked between 6:00 PM – 6:00 AM. Overtime: Regular OT and occasional Saturdays as needed. Arrow Electronics is looking for energetic and enthusiastic individuals that work well in a fast-paced computer and electronics distribution center. This position supports the operation by performing various warehouse functions, including receiving, product sort and separation, picking inventory for orders, packaging orders based on product type, and shipping functions. Overtime work can be regular and is required based on business goals.   Impeccable attendance is required. What you'll be Doing: Responsible for inspecting assembled products to ensure adherence to documented requirements. Complete physical inspections of product. Audit against documents and procedures....

Description: Join Our Team as an Electronics Engineer III where you will develop sophisticated electronics products in a world class Integrated Product Team. Location: This position does not support teleworking ;the selected candidate will be located near our Lockheed Martin Space facility in: King of Prussia PA and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision....

Position: Quality Inspector 1 Job Description: Arrow Electronics | Phoenix Shift: 6:00 AM - 4:30 PM, Friday - Monday Hourly Rate: $21.00 USD Hourly Pay: up to $22.50 USD for hours worked between 6:00 PM – 6:00 AM. Overtime: Regular OT and occasional Saturdays as needed. Arrow Electronics is looking for motivated and reliable team members to join our fast-paced electronics repair and processing facility. We offer steady employment, solid pay, excellent benefits, and growth opportunities. If you enjoy staying active, hands-on operational tasks, and being part of a strong team, this role is for you. What You'll Be Doing: Responsible for inspecting assembled product to ensure adherence to documented requirements. Complete physical inspections of product. Audit against documents and procedures. Provide recommendations to processes and procedures. Other duties as assigned. What We Are Looking For:   2-5 years of experience...

Description: You will be the Electrical Engineer for the Integrated Air & Missile Defense – Advanced Programs (IAMD AP) Long Endurance Electronic Decoy (LEED) team. Our team is racing to deliver a next generation decoy that defeats anti ship missile threats for the U.S. Navy, driving rapid hardware development across air vehicle, launcher, control electronics, and ship integration subsystems. What You Will Be Doing As the Electrical Engineer you will act as the technical backbone for the LEED program, leveraging fast paced, multidisciplinary development methods to move concepts to flight ready hardware. Your responsibilities will include: • Creating and iterating electrical schematics, PCB layouts, and wiring harnesses for the air vehicle, launcher, launch mechanism, and control electronics. • Applying mechanical design principles to ensure proper packaging, thermal management, and structural integrity of each subsystem. • Troubleshooting system issues in the lab and on...

Description: By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. At Lockheed Martin, we place an emphasis on empowering our employees by fostering innovation, integrity, and exemplifying the epitome of corporate responsibility. Your Mission is Ours. As part of the Engineering and Technology Raptor Avionics Organization at Lockheed Martin Space, this role supports the development of electronic hardware and test systems that ensure mission success for spacecraft and ground systems. Our...

Description: You will be the Electrical Engineering Asc Mgr for the Test Equipment Fabrication team. Our team is responsible for delivering technical excellence and mission success across various Lines of Business, driving innovation and collaboration. What You Will Be Doing As the Electrical Engineering Asc Mgr, you will be responsible for leading the engineering and technology laboratory team to achieve technical excellence and mission success. You will oversee the development and implementation of innovative solutions to drive business growth and improvement. Your responsibilities will include: Leading a team of engineers and technicians to design, develop, and test equipment Collaborating with cross-functional teams to identify and prioritize project requirements Developing and managing project plans, schedules, and budgets Ensuring compliance with industry standards, regulations, and company policies Identifying and mitigating risks to ensure project success Why Join Us...

Description: You will be the Manufacturing Controls/Robotics Engineer for the Robotics Engineering Team. Our team is responsible for delivering cutting‑edge automated manufacturing solutions that enable high‑rate production of missiles, launch systems, and ground vehicles. What You Will Be Doing As the Manufacturing Controls/Robotics Engineer you will be responsible for concept, design, and documentation of automated manufacturing equipment that supports site processes and meets production‑rate goals. Your responsibilities will include, but are not limited to: Troubleshoot and resolve existing electrical controls equipment such as PLCs, AC & DC motors, servo drives, and variable frequency drives. Improve existing controls equipment to enhance safety, productivity, and efficiency. Develop electrical automation designs from hardware specifications into complete construction packages for fabrication, assembly, checkout, and startup. Create design...

Description: This occupation requires the inspection of structural/electrical/plumbing assemblies, sub-assemblies, bench assemblies, functional installations, and components for workmanship and conformance to requirements; the final assembly and mating of airplane structural components; installations of Functional units and systems; shakedown and operational checkout of the completed airplane and component assemblies from production and prior to flight line. Rejects unacceptable items and prepares documentation for their disposition. Inspects the sealing operations performed on new or completely stripped, modified and resealed integral wing tanks in tank seal building, including all related structural and functional installations contained for conformance to applicable designs and specifications and rejects and dispositions unacceptable items. Inspects final washing, priming, painting, and internal trimming operations performed on completed production and modification aircraft to...