15 facility operations jobs found

Description: IAM Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, Vandenburg Air Force Base or Eastern Range facilities must apply to open requisitions on Brass Ring to be considered for the position. OCCUPATIONAL SUMMARY Perform non-destructive evaluation of materials, weldments, fabricated parts and assemblies through the use of non-destructive techniques (including ultrasound, magnetic particle, dye penetrant) and precision mechanical measurement devices (optical comparators, surface plates, gage blocks etc.). Interpret radiography reports and evaluate NDE services rendered by outside contractors. Inspect intricate machined parts, tooling fixtures, templates, patterns and gages used in fabrication of new, developmental and/or mock-up assemblies for conformance to specifications, workmanship, dimensional accuracy and blueprints. Train and certify inspectors and technicians in special skills as soldering, surface mount, crimp,...

Description: This position is for a Mid-level Technician whose primary assignment will consist of engineering hardware fabrication support, troubleshooting, testing and laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25 pounds, pushing and pulling of electronic equipment on carts, and working on test stations. These responsibilities will include fabrication of harnesses, electronic/electrical chassis and subassembly panels, mechanical rack fabrication, and various modifications to mechanical racks and electronic test stations using development engineering drawings. Ability to visualize and build electronic racks with minimal defects and little to no supervision. Candidate must be capable of working independently and in a team environment and discussing technical issues with Build Lead. Demonstrated problem-solving and troubleshooting skills, with the ability to analyze technical issues and propose effective solutions. Ability...

Description: You will be an Electronics Technician II, applying your comprehensive technical knowledge to solve complex problems and maintain, repair, troubleshoot, modify, and install various types of electronic equipment and related devices. Our team is responsible for ensuring the optimal performance of electronic systems, and we're looking for a skilled and experienced technician to join our team. What You Will Be Doing As an Electronics Technician II, you will be responsible for: • Interpreting manufacturers' manuals and technical documents to solve complex problems • Troubleshooting and repairing electronic equipment, including radar, radio, television, telecommunication, sonar, and navigational aids • Installing, modifying, and maintaining electronic systems, including personal and main frame computers and terminals • Evaluating performance and reliability of prototype or production mode equipment and recommending changes to simplify assembly and maintenance • Reading...

Description: At the dawn of a new space age, Lockheed Martin is a pioneer, partner, innovator, and builder. Our amazing people are on a mission to make a difference in the world and every day we use our outstanding skills and experiences to create, craft and build solutions to some of the worlds’ hardest engineering problems. Our culture supports employees to dream big, perform with excellence and create incredible products. We provide the resources, encouragement and focus and if you have the passion, we want to build a better tomorrow with you! OCCUPATIONAL SUMMARY This classification requires the performance of basic cable assembly operations where planning and sequencing of operations has been determined and supported by clearly defined operation sheets and instructions. WORK PERFORMED Work with technical assistance and guidance. Work with progressively less guidance and instruction as knowledge, skill, and experience in classification increases. Prepare wires and perform...

Description: This position is for a Mid-level Technician whose primary assignment will consist of engineering hardware fabrication support, troubleshooting, testing and laboratory operations responsibility, particularly in the area of military fiber optics. Performing Fiber Optic terminations and Fiber Optic repair is the primary job role. Candidate must be able to travel and be able to work on or around military aircraft. The ability to learn and operate fiber optic termination equipment and fiber optic test equipment. Some climbing on ladders may be required as well as lifting up to 25 pounds, pushing and pulling electronic equipment on carts, and working on test stations. These responsibilities will include fabrication of fiber optic and copper wire harnesses, electronic/electrical chassis and subassembly panels, mechanical rack fabrication, and various modifications to mechanical racks and electronic test stations using development engineering drawings. Ability to visualize...

Description: This position is for a Mid-level Technician whose primary assignment will consist of engineering hardware fabrication support, troubleshooting, testing and laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25 pounds, pushing and pulling of electronic equipment on carts, and working on test stations. These responsibilities will include fabrication of harnesses, electronic/electrical chassis and subassembly panels, mechanical rack fabrication, and various modifications to mechanical racks and electronic test stations using development engineering drawings. Ability to visualize and build electronic racks with minimal defects and little to no supervision. Candidate must be capable of working independently and in a team environment and discussing technical issues with Build Lead. Demonstrated problem-solving and troubleshooting skills, with the ability to analyze technical issues and propose effective solutions....

Description: This occupation requires the inspection of completed flat and contoured bonded panels and composite/laminate details by the use of non-destructive methods as afforded by ultrasonic and other comparable evaluation equipment and processes to verify structural integrity. Performs visual and/or dimensional inspection of welded or shot-peened parts/assemblies and in-process inspection of welding operations to assure blueprint compliance and correct processing. Basic Qualifications: Must meet level II certified able in 3 out of 5 nondestructive testing disciplines. Desired Skills: Experience with CR Radiography NDI level II certified for Dye Penetrate, Eddy Current, Ultrasonic or Radiography. Experience with automated inspection equipment Experience in Weld inspection Texas State Radiography Certified Certified Weld Inspector Clearance Level: None Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing...

Description: You will be the Electrical Harness Backshop, Avionics Technician for the Lockheed Martin Greenville Electrical Backshop. Our team is responsible for backshop harness build, fabricating wires, continuity testing, and soldering/termination operations. What You Will Be Doing As the Production Hangar Avionics F-16 Technician you will be responsible for support by Building electrical harnesses, repairing harnesses, fabricating various wires, and performing solder/de-soldering, post fabrication testing, troubleshooting as required. The candidate will be required to: • Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals. • Use hands to grasp, handle, and/or feel, reach with hands and arms, talk, and hear. • Frequently stand, walk, stoop, kneel, squat, crawl, twist, and work on or in the aircraft. • Frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds. •...

Description: You will be the Production Assembler - Chattahoochee Tech Training Program for the team which is responsible for assembling fabricated and purchased parts into detail structural and mechanical assemblies. What You Will Be Doing As the Production Assembler - Chattahoochee Tech Training Program, you will be responsible for assembling parts into detail assemblies where all locating information is established by tooling. Your responsibilities will include: Pressing in bushings or bearings, jig drilling and riveting splines or clevises to shafts, torque tubes, or push-pull rods Trimming, fitting, and burring detail parts such as stringers, minor spars, ribs, stiffeners, brackets, and clips prior to assembly Installing parts such as plate nuts, gang nuts, brackets, fittings, and gussets Assembling and temporarily fastening detail parts together in predetermined sequence for subsequent joining operations such as spot welding, riveting, or bolting...

Description: We are Lockheed Martin This position is for a Flight Test Instrumentation Electrical Design Engineer. The selected candidate will participate in the electrical design efforts for the F-16 and F-22 lines of business. Primarily function as Electrical Engineer at Fort Worth supporting test sites and local activities. The candidate will be required to perform electrical design activities for the installation of flight test instrumentation electrical components to fulfill system design block diagrams of instrumentation systems. The candidate will be responsible for developing, understanding and releasing engineering drawings, creating technical designs using CATIA, selecting and understanding electrical components, creating work instructions, monitoring fabrication activities, providing liaison support with the fabrication shop and test sites, and providing mod support. This position will be responsible for communicating and coordinating with flight test instrumentation...

Description: You will be the Tech C/Hybrid Inspector for our team, responsible for ensuring the quality and integrity of our products. Our team performs critical inspection and testing functions to guarantee that our cables, harnesses, and circuit card assemblies meet the highest standards. What You Will Be Doing As the Tech C/Hybrid Inspector, you will be responsible for conducting inspections and tests on various products, including cables, harnesses, and circuit card assemblies. You will utilize basic measuring equipment, instruments, and custom test equipment to verify proper identification, dimensions, and functionality. Your responsibilities will include: -Performing inspections and tests using equipment such as DMM, Milliohm Meter, DITMCO, and CIRRIS tester -Providing acceptance of materials by following quality inspection plans or customer acceptance procedures -Installing and operating test units, including chambers, ovens, and other test machinery -Documenting errors...

Description: You will be the Aircraft Flight Line Inspector for the team which is responsible for inspecting complex, state-of-the-art aircraft between assembly and delivery to the customer. What You Will Be Doing As the Aircraft Flight Line Inspector, you will be responsible for inspecting, testing, and operating entire aircraft electronic systems, including new systems, for conformance to company and customer specifications. Your responsibilities will include: Inspecting completed aircraft compartment by compartment, including cabin and flight station, involving structures, functional installations, accessories, instruments, etc. Inspecting the installation and operation of test instruments, devices, or systems used for recording results of performance of the aircraft, its components, assemblies, functional units, accessories, or other items during aerodynamic, stress, flight, or other tests Operating or observing the operation of all aircraft functional...

Description: You will be an Aircraft Electrician I for our Special Operations Forces Global Logistic Support Services (SOF GLSS) team, based in Crestview, FL. Our team is responsible for modifying military aircraft and ground vehicles to meet the evolving operational needs of the SOF community. What You Will Be Doing As an Aircraft Electrician I, you will be responsible for: • Install, route, terminate, and test electrical cables and harnesses on C-130J aircraft. • Remove and install aircraft components as required. • Interpret engineering drawings and blueprints such as electrical wiring diagrams, routing drawings, and harness assembly drawings. • Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, and other specifications to determine feasibility and method of install/modification. • Use and apply hand tools, power tools, work stands, support equipment, and special tools/calibrated test equipment. • Comprehend documents such as safety...

Description: You will be an Aircraft Electrician II, responsible for installing, testing, and maintaining electrical systems and components on C-130J aircraft. Our team is committed to delivering exceptional results, and we're looking for a highly skilled and experienced aircraft electrician to join our team. What You Will Be Doing As an Aircraft Electrician II, you will be responsible for: • Installing, clamping, terminating, and testing electrical cables and harnesses on C-130J aircraft • Inspecting, troubleshooting, and maintaining C-130J avionic and electrical systems, components, and related equipment • Removing and installing aircraft components as required, and conducting functional tests of components and systems • Assisting with aircraft launch and recovery, servicing, rigging, jacking, towing, and inspections • Reading and interpreting manufacturers' maintenance manuals, service bulletins, technical data, and other specifications to determine feasibility and...

Description: The coolest jobs on this planet… or any other… are with Lockheed Martin Space. Lockheed Martin is a pioneer, partner, innovator, and builder. Our amazing people are on a mission to make a difference in the world and every single day we use our skills and experiences to create, design, and build solutions to some of the worlds’ hardest engineering problems. Do you want to join a team where employees envision the impossible, perform with excellence, and build incredible products? We are creating a better today and tomorrow by seamlessly aligning diversity and inclusion efforts with Lockheed Martin’s values and business strategy. The Payload Launch Sites Support Services (PLSSS) Program within SSC provides all the launch processing support functions for the Office of Space Launch (OSL). One of the program’s two primary operating locations is Cape Canaveral Space Force Station, FL. Key elements of the PLSSS program scope include satellite launch processing,...