11 systems engineer jobs found

Description: You will be the Electromechanical Design Engineer for the Missile & Radar Electronics Packaging team. Our team delivers rugged enclosures, chassis, cold plates, card guides, wedge locks, and interconnect assemblies that enable high performance missile and radar hardware to operate reliably in demanding environments. What You Will Be Doing As the Electromechanical Design Engineer you will create and mature the mechanical and thermal solutions that marry the electronics to their protective structures. You’ll partner with circuit card designers, suppliers, and manufacturing partners to turn concepts into production ready hardware. Your responsibilities will include: • Developing detailed 3 D models and 2 D drawings in PTC Creo (ASME Y14.5/GD&T) and maintaining configuration control in Windchill (PDM/PLM). • Coordinating with circuit card designers to verify that CCA form factors, component heights, and connector placements fit the mechanical chassis and...

Description: You will be the Electrical Engineer for the Integrated Air & Missile Defense – Advanced Programs (IAMD AP) Long Endurance Electronic Decoy (LEED) team. Our team is racing to deliver a next generation decoy that defeats anti ship missile threats for the U.S. Navy, driving rapid hardware development across air vehicle, launcher, control electronics, and ship integration subsystems. What You Will Be Doing As the Electrical Engineer you will act as the technical backbone for the LEED program, leveraging fast paced, multidisciplinary development methods to move concepts to flight ready hardware. Your responsibilities will include: • Creating and iterating electrical schematics, PCB layouts, and wiring harnesses for the air vehicle, launcher, launch mechanism, and control electronics. • Applying mechanical design principles to ensure proper packaging, thermal management, and structural integrity of each subsystem. • Troubleshooting system issues in the lab and on...

Description: You will be the Manufacturing Controls/Robotics Engineer for the Robotics Engineering Team. Our team is responsible for delivering cutting‑edge automated manufacturing solutions that enable high‑rate production of missiles, launch systems, and ground vehicles. What You Will Be Doing As the Manufacturing Controls/Robotics Engineer you will be responsible for concept, design, and documentation of automated manufacturing equipment that supports site processes and meets production‑rate goals. Your responsibilities will include, but are not limited to: Troubleshoot and resolve existing electrical controls equipment such as PLCs, AC & DC motors, servo drives, and variable frequency drives. Improve existing controls equipment to enhance safety, productivity, and efficiency. Develop electrical automation designs from hardware specifications into complete construction packages for fabrication, assembly, checkout, and startup. Create design...

Description: You will be the Harness Design Engineer for the Advanced Development Programs (ADP) team which is responsible for developing cutting‑edge aircraft harness and interconnect solutions. What You Will Be Doing As the Harness Design Engineer you will be responsible for translating electrical specifications into robust wiring harness designs, creating detailed routing diagrams, and ensuring integration across mechanical and structural domains. Your responsibilities will include: Produce electrical wiring schematic drawings and design intricate power distribution systems. Gather and validate specifications, generate routing diagrams, cable layouts, and installation procedures. Coordinate with mechanical, structural, and integration teams to resolve clashes and meet safety and compliance standards. Create and maintain documentation such as routing drawings, installation guides, and change‑request tracking. Develop supplier statements of work, oversee...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. Join us in shaping a new era in space and find a career that's built for you. This is an...

Description: We are Lockheed Martin This position is for a Flight Test Instrumentation Electrical Design Engineer. The selected candidate will participate in the electrical design efforts for the F-16 and F-22 lines of business. Primarily function as Electrical Engineer at Fort Worth supporting test sites and local activities. The candidate will be required to perform electrical design activities for the installation of flight test instrumentation electrical components to fulfill system design block diagrams of instrumentation systems. The candidate will be responsible for developing, understanding and releasing engineering drawings, creating technical designs using CATIA, selecting and understanding electrical components, creating work instructions, monitoring fabrication activities, providing liaison support with the fabrication shop and test sites, and providing mod support. This position will be responsible for communicating and coordinating with flight test instrumentation...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK - Perform preventive‑maintenance inspections, functional tests, and calibrations; diagnose faults using schematics, service manuals, and ECOs (Engineering Change Order); replace/repair boards, modules, connectors, and firmware. - Disassemble, inspect, and repair COLT test kits (signal generators, load banks, adapters); re‑term or replace internal...

Description: You will be the Inspector Sr for the Quality Inspection team. Our team is responsible for ensuring the highest product quality across the Lufkin facility. What You Will Be Doing As the Inspector Sr you will be responsible for leading quality inspections, ensuring compliance with standards, and driving continuous improvement. Your responsibilities will include, but are not limited to: Conduct thorough inspections of incoming and outgoing products. Identify and document non-conformances and recommend corrective actions. Collaborate with production teams to implement quality improvements. Maintain inspection records and ensure compliance with industry standards. Provide training and guidance on quality inspection procedures. Why Join Us We are looking for a collaborative professional who thrives on precision and takes pride in delivering flawless results. This role offers the chance to influence product excellence at a key...

Description: You will be a Engineering Aide at Lockheed Martin, turning engineering drawings into high quality electronic and electro mechanical assemblies. Our team supports both Engineering and Manufacturing Production, ensuring reliable hardware for critical defense programs. What You Will Be Doing As a Engineering Aide you will be responsible for building circuit cards, and wiring harnesses, then integrating them into single or multi bay cabinet units. You will work independently while collaborating closely with Engineers, Draftsmen, Procurement, and Quality Inspectors to keep projects on schedule and on spec. Your responsibilities will include: • Placing and soldering components on circuit cards and sub-assemblies according to blueprints, schematics, and engineering guides. • Fabricating wiring harnesses, including connector pinning, de pinning, and installation of mounting hardware. • Assembling lower-level builds into complete cabinet assemblies for delivery to...

Description: You will be the In-Process Build Inspector for the Lockheed Martin Missiles and Fire Control (MFC) team. Our team is responsible for ensuring the quality and functionality of electrical, electronic, and mechanical systems, among others, to meet company and customer requirements. What You Will Be Doing As the In-Process Build Inspector you will be responsible for conducting in‑process inspections that verify assemblies meet engineering specifications and performance standards. Your responsibilities will include, but are not limited to: Perform detailed inspections of electrical, electronic, and mechanical components during build. Compare work against drawings, specifications, and test data. Document findings and generate non‑conformance reports. Collaborate with engineers and production staff to resolve quality issues. Support continuous‑improvement initiatives to enhance product reliability. Why Join Us The ideal candidate...

Description: You will be the Electrical Engineering Asc Mgr for the Test Equipment Fabrication team. Our team is responsible for delivering technical excellence and mission success across various Lines of Business, driving innovation and collaboration. What You Will Be Doing As the Electrical Engineering Asc Mgr, you will be responsible for leading the engineering and technology laboratory team to achieve technical excellence and mission success. You will oversee the development and implementation of innovative solutions to drive business growth and improvement. Your responsibilities will include: Leading a team of engineers and technicians to design, develop, and test equipment Collaborating with cross-functional teams to identify and prioritize project requirements Developing and managing project plans, schedules, and budgets Ensuring compliance with industry standards, regulations, and company policies Identifying and mitigating risks to ensure project success Why Join Us...