14 jobs found

Description SAIC is seeking multiple levels of Cable Fabrication Technicians to join our team in North Charleston, SC to support the USMC to perform cable fabrication work by reading and interpreting drawings, schematics, and cable run sheets to assemble cables. Job Description: Perform cable fabrication work for multiple government projects Read and interpret drawings, schematics, and cable run sheets to verify correct build of cables Assemble cables to specifications via cable run sheets and/or schematics; to include but not limited to multi-pin connectors and RF cables Assemble cable harnesses and junction box assemblies; including MIL-SPEC cylindrical connectors, back shells, terminal boxes, and radio frequency (RF) Proficient in the use, care and maintenance of crimp tools, heat gun, and various electrical and mechanical tools Maintain, troubleshoot, test and check all of the cables that are built and produced in the shop...

Description SAIC is seeking multiple levels of Cable Fabrication Technicians to join our team in North Charleston, SC to support the USMC to perform cable fabrication work by reading and interpreting drawings, schematics, and cable run sheets to assemble cables. Job Description: Perform cable fabrication work for multiple government projects Read and interpret drawings, schematics, and cable run sheets to verify correct build of cables Assemble cables to specifications via cable run sheets and/or schematics; to include but not limited to multi-pin connectors and RF cables Assemble cable harnesses and junction box assemblies; including MIL-SPEC cylindrical connectors, back shells, terminal boxes, and radio frequency (RF) Proficient in the use, care and maintenance of crimp tools, heat gun, and various electrical and mechanical tools Maintain, troubleshoot, test and check all of the cables that are built and produced in the shop using TMDE (test, measure, and...

Description SAIC is seeking a Engineering Tech IV at Crane, IN. JOB DESCRIPTION: Perform CCA (Circuit Card Assembly) testing and repair on RFBU (Radio Frequency Blanking Unit) CCAs. Perform Miniature/Microminiature Electronics Repair (2M) supporting testing and repair of Circuit Card Assemblies (CCA) and Electronic Modules (EM). Review documentations, standard operating procedures, and drawings to determine component root cause analysis troubleshooting. Fluent with Windows operating systems and how to navigate them and standard applications within. Collaborate and fluently communicate with management, leads, QA, engineering, logisticians, and other technicians as needed to fulfill the test and repair operations. Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions. Assists in determining methods or actions to remedy malfunctions. Collects, maintains, organizes, compiles,...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary: SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. SAIC is looking for someone to support the MK710 program here at the SAIC Middletown office. The job will entail a complex/detailed troubleshooting effort along with full redesign engineering effort. Location: The work will be at both 28 Jacome Way, Middletown, RI, and the Naval Undersea Warfare Center (NUWC) Division Newport. Work Schedules: Flexible work schedule...

Description SAIC is seeking a dedicated and hardworking Production Laborer with experience to join our team at the Bedford, IN location. This role involves preparing and performing sandblasting operations on various materials to meet production standards. The ideal candidate will ensure that all work is completed with high-quality standards, following safety protocols, and meeting production deadlines. Key Responsibilities: Operate sandblasting equipment to clean, smooth, or finish surfaces of materials such as metal, concrete, or other industrial products. Prepare workpieces by masking off areas that should not be blasted and ensuring proper alignment. Monitor equipment during sandblasting processes, making adjustments as necessary to ensure optimal performance. Inspect finished surfaces to ensure they meet the required specifications and quality standards. Maintain equipment, perform routine cleaning, and report any issues or malfunctions to management. Follow all...

Description SAIC is seeking a dedicated and hardworking Production Laborer with experience to join our team at the Bedford, IN location. This role involves preparing and performing sandblasting operations on various materials to meet production standards. The ideal candidate will ensure that all work is completed with high-quality standards, following safety protocols, and meeting production deadlines. Key Responsibilities: Operate sandblasting equipment to clean, smooth, or finish surfaces of materials such as metal, concrete, or other industrial products. Prepare workpieces by masking off areas that should not be blasted and ensuring proper alignment. Monitor equipment during sandblasting processes, making adjustments as necessary to ensure optimal performance. Inspect finished surfaces to ensure they meet the required specifications and quality standards. Maintain equipment, perform routine cleaning, and report any issues or malfunctions to management. Follow all...

Description SAIC is seeking an Integration Technician for our customer site in North Charleston, SC to support MADIS (Marine Air Defense Integrated System). Primary function includes activities such as basic machining, modification, fabrication, assembly and test for metal, electrical and COTS components. Job Description: Will be primarily tasked with performing moderate to complex vehicle integration tasks to include cable routing, metal work installations, and technical support to integrate, install, modify, and perform upgrades in support of C5ISR systems May assemble cabinets, chassis, consoles, or similar devices and install them with electronic or electro-mechanical equipment Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions Construct components, subunits, or simple models, adapt standard equipment, and troubleshoot system failures through various skill...

Description SAIC is seeking a Laborer to join in and support our team at our office in Hanahan, SC . Working from general procedures and instructions, the Laborer will assist and execute transactions in an accurate and timely manner. Additional responsibilities may include but are not limited to: Being responsible for performing department processes and safely operating equipment to complete duties Must ensure timeliness; packaging, routing, and systems work is completed accurately and timely Ensure safe work environment Participate in team environment Warehousing system on the floor Complete tasks by following pre-established procedures Follows detailed instructions Assist in vehicle integration and testing Apply basic skills and may develop advanced skills using tools and equipment appropriate for the position Must be flexible Must be able to adhere to productivity goals Complete routine, repetitive, and/or standardized...

Description SAIC is seeking an Integration Technician for our customer site in North Charleston, SC to support MADIS (Marine Air Defense Integrated System). Primary functions include: Activities such as basic machining, modification, fabrication, assembly and test for metal, electrical and COTS components. JOB DESCRIPTION: • Will be primarily tasked with performing moderate to complex vehicle integration tasks to include cable routing, metal work installations, and technical support to integrate, install, modify, and perform upgrades in support of C5ISR systems. • May assemble cabinets, chassis, consoles, or similar devices and install them with electronic or electro-mechanical equipment. • Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions • Construct components, subunits, or simple models, adapt standard equipment, and troubleshoot system failures through various...

Description SAIC is looking for a Project Manager with construction management experience to join our team in Springfield, V A. The position requires an active TS/SCI with Polygraph . The ideal candidate shall have a broad facility project and construction management background including: project coordination, planning, prioritization, and construction supervision. The scope of projects will range from $50K to $30M. The ideal candidate serves as an interface between the on-site government facilities management organization, design and construction contractors, Site Operations and Maintenance (O&M) support contractor, local utilities, and all other customers and stakeholders on matters related to customer requirements and execution. The candidate will be responsible for overseeing the five phases of the project life cycle to include requirements development, programming, design, construction, and closeout. Responsibilities include, but are not limited to: Act as...

Description SAIC is seeking skilled electricians and electronics technicians to join our team to support diverse projects across various platforms and environments. In this role, you'll play a key part in maintaining, troubleshooting, and installing critical electrical and electronic systems, ensuring mission success. Key Duties and Responsibilities: Install, maintain, repair, troubleshoot, and modify a variety of electrical and electronic systems, including but not limited to: Power distribution, lighting systems, and electronic control systems. Transmitting and receiving equipment such as radar, radios, telecommunications, sonar, and navigational aids. Computing devices ranging from personal systems to mainframe environments. Industrial, medical, measuring, and robotic devices. Perform preventative and corrective maintenance, including reading and interpreting complex electrical and electronic schematics. Determine equipment malfunctions and...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary : SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. SAIC is looking for someone to support the PTF program as the local Middletown office supports automated test equipment design. The job will entail a host of different projects supporting a host of Navy Underwater technical projects. Location : The work will be at both 28 Jacome Way, Middletown, RI, and the Naval Undersea Warfare Center (NUWC) Division Newport. Work...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary: SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. SAIC is looking for someone to support the MK710 program here at the SAIC Middletown office. The job will entail a complex/detailed troubleshooting effort along with full redesign engineering effort. Location: The work will be at both 28 Jacome Way, Middletown, RI, and the Naval Undersea Warfare Center (NUWC) Division Newport. Work Schedules: Flexible work schedule...

Description Description - External SAIC is seeking and Cable Fabrication Technician I for our Hanahan, SC customer site. This position is 100% on site. The Engineering Technician will be primarily tasked with: Performing moderate to complex vehicle integration tasks to include cable routing, metal work installations, and technical support to integrate, install, modify, and perform upgrades in support of C5ISR systems. Provide occasional assistance to related support areas, including but not limited to kitting and warehouse operations. Read and follow integration documentation, written or verbal instructions, schematics, rough sketches, drawings and diagrams, layouts, and plans often requiring interpretation. Qualifications Required Education and Experience: Associates degree in Engineering Technology, math or science or formal electronics training from a technical school, Class A or B military school in electronics or...