28 jobs found

Position: Senior Engineer (Hardware) - Einfochips Job Description: What You'll Be Doing: Essential Duties and Responsibilities Analyze customer requirements and validate them by analysis/modeling/prototyping or based on previous product performance Create and maintain hardware requirements specification and hardware interface control documents Performs SPICE analysis of circuits using Altium/OrCAD PSPICE tools Performs analysis and MATLAB/Simulink modeling to generate control algorithms Analyze and designs magnetics for EMI filter, boost/buck inductors and other input/output filters Performs component selection & obsolescence management Performs circuit design and schematic capture using Altium/OrCAD tools Creates hardware design document that covers design analysis, notes, and specific guidelines followed Provides inputs to PCB layout design Performs worst case load analysis (DC Load Analysis) on the circuit designs Performs component derating and...

Description: You will be the Production Assembler - Chattahoochee Tech Training Program for the team which is responsible for assembling fabricated and purchased parts into detail structural and mechanical assemblies. What You Will Be Doing As the Production Assembler - Chattahoochee Tech Training Program, you will be responsible for assembling parts into detail assemblies where all locating information is established by tooling. Your responsibilities will include: Pressing in bushings or bearings, jig drilling and riveting splines or clevises to shafts, torque tubes, or push-pull rods Trimming, fitting, and burring detail parts such as stringers, minor spars, ribs, stiffeners, brackets, and clips prior to assembly Installing parts such as plate nuts, gang nuts, brackets, fittings, and gussets Assembling and temporarily fastening detail parts together in predetermined sequence for subsequent joining operations such as spot welding, riveting, or bolting...

Description: You will be an Aircraft Electrician I for our Special Operations Forces Global Logistic Support Services (SOF GLSS) team, based in Crestview, FL. Our team is responsible for modifying military aircraft and ground vehicles to meet the evolving operational needs of the SOF community. What You Will Be Doing As an Aircraft Electrician I, you will be responsible for: • Install, route, terminate, and test electrical cables and harnesses on C-130J aircraft. • Remove and install aircraft components as required. • Interpret engineering drawings and blueprints such as electrical wiring diagrams, routing drawings, and harness assembly drawings. • Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, and other specifications to determine feasibility and method of install/modification. • Use and apply hand tools, power tools, work stands, support equipment, and special tools/calibrated test equipment. • Comprehend documents such as safety...

Position: Hardware Engineer Job Description: What You'll Be Doing: Gather requirements and finalize the architecture for the next-gen HMI module based on various SoCs including Qualcomm and NXP, Reneses, ESP Electronics Design & Development, select components and design schematics, collaborate with customer on component placement and PCB size. Do layout design and high-speed interface guidelines, perform signal integrity, power integrity, and thermal analysis and review Gerber files. Testing Design sensor boards (Motion, Light, Accelerometer, Temperature, Gyroscope, Magnetometer, calibrate sensors) and integrate with HMI Module. Protocol experience in SPI, I2C, Serial, UART, USB, DSI, CSI Coordinate with fabrication, assembly, and integration teams, conduct bring-up, functional, EDVT, thermal, and performance testing. What We Are Looking For: Experience / Education Typically requires a 4 year degree in   electrical/electronics   and a minimum of 8...

Description: Join Our Team as an Electronics Engineer where you will work on the development of a sophisticated state-of-the-art avionics product in a world class Integrated Product Development environment. Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Courtland AL and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st...

Description: This occupation performs the scope of complete aircraft assembly at all stages of production prior to flight line operations. An employee in this position may perform a wide variety of operations across multiple skill sets with highly concurrent assembly of aircraft structures, systems installations, and verifications. This occupation requires performing the complete assembly, installation, and integral mating of structural components, sub-assemblies, and assemblies. This includes rework, repair, and incorporation of design changes during major component assembly, mate, and final assembly. Works from detail, assembly, and installation blueprints, production illustrations, 3D models, planning, or other authorized documents. Works with authorized personnel as necessary to determine satisfactory assembly and installation sequence and to build completely the subassemblies and assemblies accordingly. Points out need for tooling, parts, or assembly corrections as needed....

Description: The Payload Launch Sites Support Services (PLSSS) Program within SSC provides launch processing support functions for the Office of Space Launch (OSL). One of the program’s two primary operating locations is Cape Canaveral Space Force Station, FL. Key elements of the PLSSS program scope include satellite launch processing, satellite transport operations, satellite propellant loading operations, clean room operations, satellite processing and support facilities O&M, and safety and environmental services. Basic Qualifications: • Hold a Journeyman or Master Electrician license with high voltage experience up 13.2 volts 3 phase • Be a US Citizen able to obtain a TS/SCI w/Poly Desired Skills: • Experience installation, maintaining and repairs on 3-phase switchgear, motor starters, PLCs (programmable logic controllers), VFDs (variable frequency drives), Pumps, Automatic Transfer Switches (ATS), 480V/277V-208V/120V Distribution Panels, Lightning, Generators, and...

Overview This position will serve as a Construction Quality Assurance (QA) Representative responsible for assisting Customs and Border Protection (CBP) in execution of construction along the borders of the United States. The construction QA representative shall have experience in construction oversight execution, controlling and closing of projects. A background in construction management is required. The candidate shall have strong communication skills, a demonstrated ability to deliver innovative solutions, and possess the skill of creative problem solving. This position is in El Centro, CA.    This is a full-time, temporary position lasting 12-36 months.   LMI is a new breed of digital solutions provider dedicated to accelerating government impact with innovation and speed. Investing in technology and prototypes ahead of need, LMI brings commercial-grade platforms and mission-ready AI to federal agencies at commercial speed.   Leveraging our...

Position: Quality Inspector I Job Description: Arrow Electronics | Reno, NV Shift:  8:30 AM – 5:00 PM, Monday–Friday. Hourly Rate: $22.50 USD Hourly Pay: up to $25.00 USD for hours worked between 6:00 PM – 6:00 AM. Overtime: Regular OT and occasional Saturdays as needed. Arrow Electronics is looking for energetic and enthusiastic individuals that work well in a fast-paced computer and electronics distribution center. This position supports the operation by performing various warehouse functions, including receiving, product sort and separation, picking inventory for orders, packaging orders based on product type, and shipping functions. Overtime work can be regular and is required based on business goals.   Impeccable attendance is required. What you'll be Doing: Responsible for inspecting assembled products to ensure adherence to documented requirements. Complete physical inspections of product. Audit against documents and procedures....

Description: You will be the In-Process Build Inspector for the Lockheed Martin Missiles and Fire Control (MFC) team. Our team is responsible for ensuring the quality and functionality of electrical, electronic, and mechanical systems, among others, to meet company and customer requirements. What You Will Be Doing As the In-Process Build Inspector you will be responsible for conducting in‑process inspections that verify assemblies meet engineering specifications and performance standards. Your responsibilities will include, but are not limited to: Perform detailed inspections of electrical, electronic, and mechanical components during build. Compare work against drawings, specifications, and test data. Document findings and generate non‑conformance reports. Collaborate with engineers and production staff to resolve quality issues. Support continuous‑improvement initiatives to enhance product reliability. Why Join Us The ideal candidate...

Description: WHO WE ARE Lockheed Martin is a global leader in aerospace, defense, and technology solutions, dedicated to pushing the boundaries of innovation and shaping the future of the industry. With a rich legacy of excellence and a commitment to delivering advanced capabilities to our customers, we are proud to be at the forefront of cutting-edge technology and engineering. WHAT WE'RE DOING At Lockheed Martin, we're revolutionizing the aerospace and defense sector through groundbreaking technology, advanced manufacturing processes, and a world-class team of professionals. Our mission-driven approach and unwavering dedication to excellence ensure that we continue to deliver superior products and solutions to our customers around the world. THE WORK We are seeking a skilled Aircraft Structural Mechanic with helicopter maintenance experience to join our team. The successful candidate will be responsible for performing a wide range of structural maintenance tasks, including...

Description: Determines routing of wires and conduits and determines location and method of installing such electrical units as switches, outlets, junction boxes, rectifiers, transformers and generators on electrical parts of all building facilities branch circuits feeding machine tools and other fixed equipment. Installations shall guided by trade practice, blueprints, wiring diagrams and state, municipal and underwriters' specifications, codes and ordinances. Determines advisability or need for repair or replacement with a new unit, best and safest method of restoring interrupted service and necessity and type of scaffolding to use. Computes wire gauge, power and load limit requirements when this information is not furnished using charts and handbooks considering such factors as amperage, load and distance to power supply. Installs, tests, troubleshoots, and maintains such equipment as large three phase motors, transformer banks, welding generators, panels having several...

Description: IAM Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, Vandenburg Air Force Base or Eastern Range facilities must apply to open requisitions on Brass Ring to be considered for the position. Fabricate, visually verify and rework all varieties and complexities of electronic assemblies and sub-assemblies for engineering development, qualification and production purposes. Perform operations such as component lead forming, soldering, trimming, flux removal, wire wrap, wire routing and securing wires, and related mechanical assembly of electrical chassis. Work from schematics, blueprint wiring lists, engineering sketches, and other information Integrate planning documentation, specification requirements and design changes into the process of building electronic equipment. Use best shop practice and available sources of information to determine sequence rework of operations. Perform operations verification checks including...

Description: Lockheed Martin Space Systems Company is seeking candidates who are energized and passionate about helping us build the space technologies of tomorrow. We are going to Mars and beyond! Join us in the journey! The Electronics Test/Assembly Inspector provides intermittent and final inspections and test support for electronics manufacturing: circuit boards, wire harnesses, battery, microelectronics (RF/hybrids), and electronic box assemblies. Additionally, the Inspector provides witness test, connector mate/demate and torque applications, prepares paper and electronic documentation on nonconforming hardware, interprets drawings, schematics, sketches, specifications and standards, and works from manufacturing work instructions and provides surveillance when needed. This position is located at a facility that requires special access. Must be a U.S. Citizen. Basic Qualifications: - Electronic Circuit Card experience or equivalent technical proficiency. - Quality...

Description: Updated Rate Range For This Position For This Location: $46.00 - $48.00 What You Will Be Doing: You will be the U-2 Aircraft Modification Technician for the Aircraft Modification Team which is responsible for delivering precise (Structural) modifications to U-2 Aircraft stationed at Beale AFB, California. Additional requirements and responsibilities include but are not limited to: - Heavy Depot Level Maintenance, Repair and modification of the aircraft structure and major subassembly's. Plan, layout, fabricate, assemble, install, and repair various sheet metal and structural assemblies and sub-assemblies utilizing precision measuring equipment. - The candidate will be able to complete jobs in maintenance data collection systems, adhere to all technical orders, fault isolation manuals, ground operating procedures and local operational instructions. What’s In It For You: We offer flexible work schedules and comprehensive benefits investing in your...

Description: You will be an Electronics Technician II, applying your comprehensive technical knowledge to solve complex problems and maintain, repair, troubleshoot, modify, and install various types of electronic equipment and related devices. Our team is responsible for ensuring the optimal performance of electronic systems, and we're looking for a skilled and experienced technician to join our team. What You Will Be Doing As an Electronics Technician II, you will be responsible for: • Interpreting manufacturers' manuals and technical documents to solve complex problems • Troubleshooting and repairing electronic equipment, including radar, radio, television, telecommunication, sonar, and navigational aids • Installing, modifying, and maintaining electronic systems, including personal and main frame computers and terminals • Evaluating performance and reliability of prototype or production mode equipment and recommending changes to simplify assembly and maintenance • Reading...

Description: Join Our Team as an Avionics Electronics Engineer where you will work on developing the new Long Range Hypersonic Weapon (LRHW), leveraging our decades of hypersonic experience and expertise. Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Huntsville AL and be expected to work a flexible 9x80 schedule in the office full-time. Ready for a challenge at the speed of Hypersonic? Come join Lockheed Martin's Long Range Hypersonic Weapon team. Our system will travel at Mach 5 (over a mile per second)! Helping us create a system that goes that fast means overcoming several difficult physics and engineering challenges. You will be integrating hypersonic missile technology into an Army battery on a highly accelerated schedule to deliver a hypersonic operational prototype system to the Soldier. What does this role look like? The role focuses on designing and developing electrical interfaces...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more— we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. As a Final Assembly Inspector, you will work hands-on in a production setting and utilize...

Description: This occupation requires the inspection of structural/electrical/plumbing assemblies, sub-assemblies, bench assemblies, functional installations, and components for workmanship and conformance to requirements; the final assembly and mating of airplane structural components; installations of Functional units and systems; shakedown and operational checkout of the completed airplane and component assemblies from production and prior to flight line. Rejects unacceptable items and prepares documentation for their disposition. Inspects the sealing operations performed on new or completely stripped, modified and resealed integral wing tanks in tank seal building, including all related structural and functional installations contained for conformance to applicable designs and specifications and rejects and dispositions unacceptable items. Inspects final washing, priming, painting, and internal trimming operations performed on completed production and modification aircraft to...

Description: You will be the Harness Design Engineer for the Advanced Development Programs (ADP) team which is responsible for developing cutting‑edge aircraft harness and interconnect solutions. What You Will Be Doing As the Harness Design Engineer you will be responsible for translating electrical specifications into robust wiring harness designs, creating detailed routing diagrams, and ensuring integration across mechanical and structural domains. Your responsibilities will include: Produce electrical wiring schematic drawings and design intricate power distribution systems. Gather and validate specifications, generate routing diagrams, cable layouts, and installation procedures. Coordinate with mechanical, structural, and integration teams to resolve clashes and meet safety and compliance standards. Create and maintain documentation such as routing drawings, installation guides, and change‑request tracking. Develop supplier statements of work, oversee...