17 test technician jobs found

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK - Perform preventive‑maintenance inspections, functional tests, and calibrations; diagnose faults using schematics, service manuals, and ECOs (Engineering Change Order); replace/repair boards, modules, connectors, and firmware. - Disassemble, inspect, and repair COLT test kits (signal generators, load banks, adapters); re‑term or replace internal...

Description: Lockheed Martin Space Systems Company is seeking candidates who are energized and passionate about helping us build the space technologies of tomorrow. We are going to Mars and beyond! Join us in the journey! The Electronics Test/Assembly Inspector provides intermittent and final inspections and test support for electronics manufacturing: circuit boards, wire harnesses, battery, microelectronics (RF/hybrids), and electronic box assemblies. Additionally, the Inspector provides witness test, connector mate/demate and torque applications, prepares paper and electronic documentation on nonconforming hardware, interprets drawings, schematics, sketches, specifications and standards, and works from manufacturing work instructions and provides surveillance when needed. Basic Qualifications: Electronic Circuit Card experience or equivalent technical proficiency. Quality Assurance, instrument/equipment Technician Quality Assurance, Product inspection, mechanical inspection...

Description: Responsible for the calibration and repair of all types of test, measurement and diagnostic equipment (TMDE). Requires sound knowledge of precision measurement methodologies and principles. Candidate will have responsibility for electrical and dimensional calibrations including, but not limited to; length, force, flow, pressure, mass, torque, temperature, humidity, vibration, voltage, current, resistance, RF power, and frequency. Must have an understanding of measurement traceability and be competent interpreting and converting specifications. Must be familiar with metrological/calibration quality requirements and have the ability to create detailed electronic records of work performed. Must be capable of using manuals, schematics, or blueprints to perform component level troubleshooting and repair. Must be familiar with laboratory safety requirements. Basic Qualifications: Experience with the use of precision measuring principles, theories and units of...

Description: Lockheed Martin Space Systems Company is seeking candidates who are energized and passionate about helping us build the space technologies of tomorrow. We are going to Mars and beyond! Join us in the journey! The Electronics Test/Assembly Inspector provides intermittent and final inspections and test support for electronics manufacturing: circuit boards, wire harnesses, battery, microelectronics (RF/hybrids), and electronic box assemblies. Additionally, the Inspector provides witness test, connector mate/demate and torque applications, prepares paper and electronic documentation on nonconforming hardware, interprets drawings, schematics, sketches, specifications and standards, and works from manufacturing work instructions and provides surveillance when needed. Basic Qualifications: Electronic Circuit Card experience or equivalent technical proficiency. Quality Assurance, instrument/equipment Technician Quality Assurance, Product inspection, mechanical inspection...

Description: This position is for a Mid-level Technician whose primary assignment will consist of engineering hardware fabrication support, troubleshooting, testing and laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25 pounds, pushing and pulling of electronic equipment on carts, and working on test stations. These responsibilities will include fabrication of harnesses, electronic/electrical chassis and subassembly panels, mechanical rack fabrication, and various modifications to mechanical racks and electronic test stations using development engineering drawings. Ability to visualize and build electronic racks with minimal defects and little to no supervision. Candidate must be capable of working independently and in a team environment and discussing technical issues with Build Lead. Demonstrated problem-solving and troubleshooting skills, with the ability to analyze technical issues and propose effective solutions....

Description: As a Quality Inspector, you will support test activities across multiple Assembly, Test, and Launch Operations (ATLO) areas at the Littleton, CO facility. The current primary program supported will be GPS. You will be performing critical inspections and working collaboratively with multi-functional teams to execute final assembly and testing. By working collaboratively with a team of world class technicians and engineers, our team ensures that the quality and continuous improvement is built into every level of the test process. You will also work collaboratively to resolve test anomalies, work to become an expert on requirements and specifications, and interact with the customer as needed. You will be an integral part of ensuring our dedication to 100% mission success is upheld. Typical role responsibilities include: • Providing a variety of inspections on components as directed by procedures • interpreting engineering drawings and specifications to execute test...

Description: Come join Lockheed Martin in The Last Frontier! We are currently seeking a dedicated Aircraft Electrician to join our dynamic team, focusing on the F-22 aircraft. The vast wilderness of Alaska offers a virtually unlimited playground for the outdoor enthusiast, while nearby Anchorage provides the same amenities you would find in any large city. This position is located at Joint Base Elmendorf-Richardson, Alaska supporting the F-22 modification line. This pivotal role involves a broad spectrum of responsibilities. What You Will Be Doing: Some of the job requirements & responsibilities include but are not limited to: - Services, repairs, and overhauls F-22 aircraft electrical & avionics systems to ensure airworthiness. - Repairs, replaces, and rebuilds aircraft electrical/avionics system and components. - Incorporate engineering changes. Replaces and repairs worn or damaged components. - Adjusts, repairs, and replaces electrical wiring system and...

Description: You will be a Engineering Aide at Lockheed Martin, turning engineering drawings into high quality electronic and electro mechanical assemblies. Our team supports both Engineering and Manufacturing Production, ensuring reliable hardware for critical defense programs. What You Will Be Doing As a Engineering Aide you will be responsible for building circuit cards, and wiring harnesses, then integrating them into single or multi bay cabinet units. You will work independently while collaborating closely with Engineers, Draftsmen, Procurement, and Quality Inspectors to keep projects on schedule and on spec. Your responsibilities will include: • Placing and soldering components on circuit cards and sub-assemblies according to blueprints, schematics, and engineering guides. • Fabricating wiring harnesses, including connector pinning, de pinning, and installation of mounting hardware. • Assembling lower-level builds into complete cabinet assemblies for...

Description: OCCUPATIONAL SUMMARY This classification requires to identify, evaluate, interpret, and document findings of Non-Destructive Test (NDT) results for structures, assemblies, systems, components, materials, and parts for compliance to applicable specifications and drawings. Perform required calibration and preventative maintenance (PM) of Non-Destructive Test support equipment. Knowledge of computer skills to perform work. WORK PERFORMED Independently set up, maintain, and operate the equipment and processes to perform inspection operations using visual, magnetic particle, and/or dye penetrant testing. Determine inspection method and appropriate inspection techniques based upon applicable and supporting documentation, drawings, and engineering provided information. Identify, interpret, and analyze results based upon acceptance criteria. Record data working from sketches, drawings, test procedures, blueprints, and other engineering information. Assist engineering and...

Description: As part of the Engineering and Technology Raptor Avionics Organization at Lockheed Martin Space, this Electronics Engineering role supports the development of electronic hardware and test systems that ensure mission success for spacecraft and ground systems. Location: This position does not support teleworking ;the selected candidate will be located near our Lockheed Martin Space facility in: Littleton CO and be expected to work a flexible 9x80 schedule in the office full-time. What does this role look like? • Our team develops electronic circuits, test equipment, and hardware used in spacecraft integration and environmental test environments. • As a Circuit Design Engineer, you will design, develop, integrate, and sustain electronic circuits and test equipment while working in a collaborative, multidisciplinary engineering environment. • This role includes circuit design, schematic development, hardware integration, and support of hardware test and...

Description: IAM Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, VAFB or Eastern Range facilities must apply to open requisitions on Brass Ring to be considered for the position. This occupation requires the installation, maintenance, repair, overhaul and modification of plant air conditioning, ventilation, and refrigeration systems, and equipment, including low temperature cascade systems, Building Automation Systems (BAS) and steam boiler, gas-fired heating equipment (excludes installation of ducts and utility feed lines). Operate centrifugal chillers, cooling towers, hot water and steam boilers and air handling systems per manufacturers’ recommendations and management directives. Determine, by making periodic inspections, the repair and maintenance work necessary to prevent functional breakdowns requiring major overhaul of air conditioning, ventilation and refrigeration systems and equipment, including low...

Description: As a Quality Inspector, you will support test activities across multiple Assembly, Test, and Launch Operations (ATLO) areas at the Littleton, CO facility. The current primary program supported will be GPS. You will be performing critical inspections and working collaboratively with multi-functional teams to execute final assembly and testing. By working collaboratively with a team of world class technicians and engineers, our team ensures that the quality and continuous improvement is built into every level of the test process. You will also work collaboratively to resolve test anomalies, work to become an expert on requirements and specifications, and interact with the customer as needed. You will be an integral part of ensuring our dedication to 100% mission success is upheld. Typical role responsibilities include: • Providing a variety of inspections on components as directed by procedures • interpreting engineering drawings and specifications to execute test...

Description: Test Engineering department designs and fabricates equipment that will be used in the development and manufacture of tactical hardware. We are seeking early career individuals who will be fabricating electronic, electro-mechanical assemblies (and sub-assemblies) to Engineering drawings. Daily activity would include not only a fast-paced fabrication environment, but it would also include using several computer-based programs that will update job status, Quality Inspections, and Engineering changes. Specific Job Description: Fabrication will include the ability to place and solder components on circuit cards and sub-assemblies. The fabrication of wiring harnesses will require connector pinning, de-pinning, and applying mounting hardware. In addition, these lower-level assemblies are to be built-up into single, or multi-bay cabinet assemblies, for the delivery to Engineering or Manufacturing Production areas. This position will provide the opportunity for the candidate...

Description: You will be an Aircraft Electrician I for our Special Operations Forces Global Logistic Support Services (SOF GLSS) team, based in Crestview, FL. Our team is responsible for modifying military aircraft and ground vehicles to meet the evolving operational needs of the SOF community. What You Will Be Doing As an Aircraft Electrician I, you will be responsible for: • Install, route, terminate, and test electrical cables and harnesses on C-130J aircraft. • Remove and install aircraft components as required. • Interpret engineering drawings and blueprints such as electrical wiring diagrams, routing drawings, and harness assembly drawings. • Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, and other specifications to determine feasibility and method of install/modification. • Use and apply hand tools, power tools, work stands, support equipment, and special tools/calibrated test equipment. • Comprehend documents such as safety...

Description: You will be an Aircraft Electrician II, responsible for installing, testing, and maintaining electrical systems and components on C-130J aircraft. Our team is committed to delivering exceptional results, and we're looking for a highly skilled and experienced aircraft electrician to join our team. What You Will Be Doing As an Aircraft Electrician II, you will be responsible for: • Installing, clamping, terminating, and testing electrical cables and harnesses on C-130J aircraft • Inspecting, troubleshooting, and maintaining C-130J avionic and electrical systems, components, and related equipment • Removing and installing aircraft components as required, and conducting functional tests of components and systems • Assisting with aircraft launch and recovery, servicing, rigging, jacking, towing, and inspections • Reading and interpreting manufacturers' maintenance manuals, service bulletins, technical data, and other specifications to determine feasibility and...

Description: You will be an Electronics Technician II, applying your comprehensive technical knowledge to solve complex problems and maintain, repair, troubleshoot, modify, and install various types of electronic equipment and related devices. Our team is responsible for ensuring the optimal performance of electronic systems, and we're looking for a skilled and experienced technician to join our team. What You Will Be Doing As an Electronics Technician II, you will be responsible for: • Interpreting manufacturers' manuals and technical documents to solve complex problems • Troubleshooting and repairing electronic equipment, including radar, radio, television, telecommunication, sonar, and navigational aids • Installing, modifying, and maintaining electronic systems, including personal and main frame computers and terminals • Evaluating performance and reliability of prototype or production mode equipment and recommending changes to simplify assembly and maintenance • Reading...

Description: You will be the Tech C/Hybrid Inspector for our team, responsible for ensuring the quality and integrity of our products. Our team performs critical inspection and testing functions to guarantee that our cables, harnesses, and circuit card assemblies meet the highest standards. What You Will Be Doing As the Tech C/Hybrid Inspector, you will be responsible for conducting inspections and tests on various products, including cables, harnesses, and circuit card assemblies. You will utilize basic measuring equipment, instruments, and custom test equipment to verify proper identification, dimensions, and functionality. Your responsibilities will include: -Performing inspections and tests using equipment such as DMM, Milliohm Meter, DITMCO, and CIRRIS tester -Providing acceptance of materials by following quality inspection plans or customer acceptance procedures -Installing and operating test units, including chambers, ovens, and other test machinery -Documenting errors...