32 insurance jobs found

Description: This position is part of the Quality Assurance Support Team for the F-22 light Test Program at Edwards AFB CA and will be responsible for aircraft support / test equipment inspections. Experience in component removal/replacement scheduled and unscheduled maintenance; Time Compliance Technical Orders (TCTOs) and aircraft modification execution. Technical requirements also include assist/verify fault isolation, troubleshooting, and repair of system failures detected during operational checks associated with modifications and restoration of aircraft to flying condition subsequent to accomplishment of modifications and maintenance. Interprets and uses various test equipment and works from wiring diagrams, engineering drawings, job guides, and maintenance manuals. Must be willing to train and assist in multiple disciplines. Selected candidate will have experience with understanding technical requirements on fighter type aircraft. Candidate must be able to read and...

Position: Quality Inspector I Job Description: Arrow Electronics | Reno, NV Shift:  8:30 AM – 5:00 PM, Monday–Friday. Hourly Rate: $22.50 USD Hourly Pay: up to $25.00 USD for hours worked between 6:00 PM – 6:00 AM. Overtime: Regular OT and occasional Saturdays as needed. Arrow Electronics is looking for energetic and enthusiastic individuals that work well in a fast-paced computer and electronics distribution center. This position supports the operation by performing various warehouse functions, including receiving, product sort and separation, picking inventory for orders, packaging orders based on product type, and shipping functions. Overtime work can be regular and is required based on business goals.   Impeccable attendance is required. What you'll be Doing: Responsible for inspecting assembled products to ensure adherence to documented requirements. Complete physical inspections of product. Audit against documents and procedures....

Position: Hardware Engineer(eInfochips Inc) Job Description: What You'll Be Doing: Gather requirements and finalize the architecture for the next-gen HMI module based on various SoCs including Qualcomm and NXP, Reneses, ESP Electronics Design & Development, select components and design schematics, collaborate with customer on component placement and PCB size. Do layout design and high-speed interface guidelines, perform signal integrity, power integrity, and thermal analysis and review Gerber files. Testing Design sensor boards (Motion, Light, Accelerometer, Temperature, Gyroscope, Magnetometer, calibrate sensors) and integrate with HMI Module. Protocol experience in SPI, I2C, Serial, UART, USB, DSI, CSI Coordinate with fabrication, assembly, and integration teams, conduct bring-up, functional, EDVT, thermal, and performance testing. What We Are Looking For: Experience / Education Typically requires a 4 year degree in electrical/electronics and a minimum...

Position: Hardware Engineer Job Description: What You'll Be Doing: Gather requirements and finalize the architecture for the next-gen HMI module based on various SoCs including Qualcomm and NXP, Reneses, ESP Electronics Design & Development, select components and design schematics, collaborate with customer on component placement and PCB size. Do layout design and high-speed interface guidelines, perform signal integrity, power integrity, and thermal analysis and review Gerber files. Testing Design sensor boards (Motion, Light, Accelerometer, Temperature, Gyroscope, Magnetometer, calibrate sensors) and integrate with HMI Module. Protocol experience in SPI, I2C, Serial, UART, USB, DSI, CSI Coordinate with fabrication, assembly, and integration teams, conduct bring-up, functional, EDVT, thermal, and performance testing. What We Are Looking For: Experience / Education Typically requires a 4 year degree in   electrical/electronics   and a minimum of 8...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. THE WORK Lockheed Martin Oldsmar is looking for a highly experienced Solder Assembler with deep expertise in both surface mount technology (SMT) and through hole soldering. The ideal candidate will be proficient in reworking and repairing a wide range of components. (SMT, PTH, Bottom-terminated) This role supports high mix, low volume production of critical aerospace and defense electronics, requiring meticulous attention to detail and a strong commitment to quality. Ability to work from diagrams and drawings, make initial layouts, and use hand and/or power...

Position: Quality Inspector I (Tuesday to Friday - 2 shifts available) Job Description: Arrow Electronics | Phoenix   2 Shift available: Tuesday through Friday: 6:00 am to 4:30 pm Tuesday through Friday: 11:00 am to 7:30 pm Hourly Rate: $21.00 USD Hourly Pay: up to $22.50 USD for hours worked between 6:00 PM – 6:00 AM. Overtime: Regular OT and occasional Saturdays as needed. Arrow Electronics is looking for motivated and reliable team members to join our fast-paced electronics repair and processing facility. We offer steady employment, solid pay, excellent benefits, and growth opportunities. If you enjoy staying active, hands-on operational tasks, and being part of a strong team, this role is for you. What You'll Be Doing: Responsible for inspecting assembled product to ensure adherence to documented requirements. Complete physical inspections of product. Audit against documents and procedures. Provide recommendations to...

Description: We are seeking a Electro-Mechanical Engineering Manager in Severn, MD. Role & Responsibilities: • Manages the application of electrical, electronic and mechanical principles to components and systems, including assembly, analysis, and documentation of results for space systems • Construction of developmental assemblies, sub-assemblies and components; Quality testing. • Responsible for coordinating subordinate employee recruitment, selection and training, performance assessment, work assignments, salary, and recognition/disciplinary actions. • Leads team of 8-12 Mechanical and Electro-mechanical Engineers. • Oversees support and participation in the design, test, modification, fabrication and assembly of prototype and flight electromechanical systems. Basic Qualifications: • 5+ years Engineering Management Experience and/or Integrated Product Team Leadership. • Experience with Resource management, Management of direct reports, Interviewing & Hiring,...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we are driven by innovation and integrity. We believe that by applying the highest standards of business ethics and visionary thinking, everything is within our reach – and yours as a Lockheed Martin employee. Lockheed Martin values your skills, training and education. Come and experience your future! THE WORK Performs welding processes on aluminum and steel parts. RMS Owego MTA is seeking a welder to support our production manufacturing facility whose mission is to fabricate machined components needed for the success of our armed forces both at home and abroad. The Owego MTA is instrumental in the production of various components utilized on helicopters, radar systems, and electronic warfare systems that are vital to the success of our service men and women. WHO YOU ARE A welder at RMS Owego MTA will be responsible for a variety of MIG and TIG production welding, as well as maintenance repairs....

Description: Lockheed Martin Space Systems Company is seeking candidates who are energized and passionate about helping us build the space technologies of tomorrow. We are going to Mars and beyond! Join us in the journey! The Electronics Test/Assembly Inspector provides intermittent and final inspections and test support for electronics manufacturing: circuit boards, wire harnesses, battery, microelectronics (RF/hybrids), and electronic box assemblies. Additionally, the Inspector provides witness test, connector mate/demate and torque applications, prepares paper and electronic documentation on nonconforming hardware, interprets drawings, schematics, sketches, specifications and standards, and works from manufacturing work instructions and provides surveillance when needed. Basic Qualifications: Electronic Circuit Card experience or equivalent technical proficiency. Quality Assurance, instrument/equipment Technician Quality Assurance, Product inspection, mechanical inspection...

Position: Production Technician Job Description: Arrow Electronics is currently seeking a dedicated and team-oriented Production Technician to join our team in the assembly of computing products. In this role as a Production Technician I, you will be expected to demonstrate excellence in key areas, including safety, quality, precision, collaboration, and reliability. What You’ll Be Doing:   The Electronics Assembly Technician is responsible for performing low complexity builds of computing products in accordance with build plan. Installs system hardware and components. Prepare product for assembly; kit and package product. Perform builds of low complexity products according to build plan; install system hardware and components. Identify and process non-conforming material. Maintain product documentation; capture component and system serial numbers. Create and apply product labeling. Has limited prior relevant training or work experience....

Position: Técnico de Mantenimiento de Equipos (Sector Electrónico) Job Description: Arrow Electronics is looking for an Equipment Maintenance Technician to join our team in Guadalajara! What You'll Be Doing Responsible for the installation, maintenance and repair of facility equipment related to the functional operation of the value-added center. May be involved in miscellaneous facility structural repairs and maintenance as needed or required. Demonstrates basic competency is at least two specialty areas. Depending on facility, specialties include basic machining, welding, carpentry, etc. Understands the basic safety principles of all pieces of equipment. Takes direction from supervisor and level 2 technician in terms of prioritization. Escalates issues beyond scope of expertise to level II tech or tech supervisor. Able to deal with all levels of staff, including verbal interactions with peer technicians, PDC operators, crew leads and supervisors, technician...

Position: Senior Trade Compliance Manager Job Description: Arrow Electronics is a global provider of products, services, and solutions to industrial and commercial users of electronic components and enterprise computing solutions. Arrow Electronics guides innovation forward for over 220,000 leading technology manufacturers and service providers. With 2025 sales of $30.9 billion, Arrow develops technology solutions that improve business and daily life. The company maintains 228 locations worldwide with over 85 countries served. A Fortune 154 company with 21,500 employees worldwide, Arrow brings technology solutions to a breadth of markets, including telecommunications, information systems, transportation, medical, industrial, and consumer electronics. Arrow provides specialized services and expertise across the entire product lifecycle. Arrow does this by connecting customers to the right technology at the right place, time, and price. Arrow provides extraordinary value...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. By optimizing the power distribution and reliability of critical test facilities, you will directly enable the successful verification and validation of advanced naval technologies, ensuring national security through engineering excellence. THE WORK Electrical Engineering position tasked with ensuring the logical and systematic conversion of customer or product requirements into executable solutions. This may include requirements and concept of operations development, system integration, verification and validation, and system transition. We are seeking...

Description: As a Quality Inspector, you will support test activities across multiple Assembly, Test, and Launch Operations (ATLO) areas at the Littleton, CO facility. The current primary program supported will be GPS. You will be performing critical inspections and working collaboratively with multi-functional teams to execute final assembly and testing. By working collaboratively with a team of world class technicians and engineers, our team ensures that the quality and continuous improvement is built into every level of the test process. You will also work collaboratively to resolve test anomalies, work to become an expert on requirements and specifications, and interact with the customer as needed. You will be an integral part of ensuring our dedication to 100% mission success is upheld. Typical role responsibilities include: • Providing a variety of inspections on components as directed by procedures • interpreting engineering drawings and specifications to execute test...

Description: Job Description : Lockheed Martin Missiles and Fire Control (MFC) in Chelmsford, MA is looking to hire a Quality Inspector Senior. The selected candidate will be responsible for the following: -Inspecting purchased parts and materials for conformity to standards, specifications, and processing requirements using predetermined methods and in some cases may determine methods and sequences. -Inspecting for proper identity and dimensions using such measuring devices as micrometers, gauges, and calipers. -Visually inspecting for obvious defects or damage such as corrosion, cracks, dents, scratches, and pits. -Verifying specifications using purchase orders, blueprints, drawing or inspection instructions, and checklists. -Making pass/fail decisions on inspected goods. In addition, the selected candidate may improvise or adapt inspection and measuring devices as needed. May monitor and verify quality in accordance with statistical process or other control...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. THE WORK We are seeking a detail oriented Solder Assembler with a strong understanding of IPC (Institute of Printed Circuits) standards to join our manufacturing team. The successful candidate will be responsible for assembling printed circuit boards (PCBs) by soldering a wide variety of components, performing defect identification, and ensuring all work meets stringent quality and reliability requirements. • Perform manual and/or selective soldering of through hole, surface mount (SMT), BGA, QFN, CSP, and other component types. • Conduct visual inspections...

Description: OCCUPATIONAL SUMMARY This classification requires to identify, evaluate, interpret, and document findings of Non-Destructive Test (NDT) results for structures, assemblies, systems, components, materials, and parts for compliance to applicable specifications and drawings. Perform required calibration and preventative maintenance (PM) of Non-Destructive Test support equipment. Knowledge of computer skills to perform work. WORK PERFORMED Independently set up, maintain, and operate the equipment and processes to perform inspection operations using visual, magnetic particle, and/or dye penetrant testing. Determine inspection method and appropriate inspection techniques based upon applicable and supporting documentation, drawings, and engineering provided information. Identify, interpret, and analyze results based upon acceptance criteria. Record data working from sketches, drawings, test procedures, blueprints, and other engineering information. Assist engineering and...

Description: As part of the Engineering and Technology Raptor Avionics Organization at Lockheed Martin Space, this Electronics Engineering role supports the development of electronic hardware and test systems that ensure mission success for spacecraft and ground systems. Location: This position does not support teleworking ;the selected candidate will be located near our Lockheed Martin Space facility in: Littleton CO and be expected to work a flexible 9x80 schedule in the office full-time. What does this role look like? • Our team develops electronic circuits, test equipment, and hardware used in spacecraft integration and environmental test environments. • As a Circuit Design Engineer, you will design, develop, integrate, and sustain electronic circuits and test equipment while working in a collaborative, multidisciplinary engineering environment. • This role includes circuit design, schematic development, hardware integration, and support of hardware test and...

Description: IAM Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, VAFB or Eastern Range facilities must apply to open requisitions on Brass Ring to be considered for the position. This occupation requires the installation, maintenance, repair, overhaul and modification of plant air conditioning, ventilation, and refrigeration systems, and equipment, including low temperature cascade systems, Building Automation Systems (BAS) and steam boiler, gas-fired heating equipment (excludes installation of ducts and utility feed lines). Operate centrifugal chillers, cooling towers, hot water and steam boilers and air handling systems per manufacturers’ recommendations and management directives. Determine, by making periodic inspections, the repair and maintenance work necessary to prevent functional breakdowns requiring major overhaul of air conditioning, ventilation and refrigeration systems and equipment, including low...

Description: As a Quality Inspector, you will support test activities across multiple Assembly, Test, and Launch Operations (ATLO) areas at the Littleton, CO facility. The current primary program supported will be GPS. You will be performing critical inspections and working collaboratively with multi-functional teams to execute final assembly and testing. By working collaboratively with a team of world class technicians and engineers, our team ensures that the quality and continuous improvement is built into every level of the test process. You will also work collaboratively to resolve test anomalies, work to become an expert on requirements and specifications, and interact with the customer as needed. You will be an integral part of ensuring our dedication to 100% mission success is upheld. Typical role responsibilities include: • Providing a variety of inspections on components as directed by procedures • interpreting engineering drawings and specifications to execute test...