15 component engineer jobs found

Position: Hardware Engineer(eInfochips Inc) Job Description: What You'll Be Doing: Gather requirements and finalize the architecture for the next-gen HMI module based on various SoCs including Qualcomm and NXP, Reneses, ESP Electronics Design & Development, select components and design schematics, collaborate with customer on component placement and PCB size. Do layout design and high-speed interface guidelines, perform signal integrity, power integrity, and thermal analysis and review Gerber files. Testing Design sensor boards (Motion, Light, Accelerometer, Temperature, Gyroscope, Magnetometer, calibrate sensors) and integrate with HMI Module. Protocol experience in SPI, I2C, Serial, UART, USB, DSI, CSI Coordinate with fabrication, assembly, and integration teams, conduct bring-up, functional, EDVT, thermal, and performance testing. What We Are Looking For: Experience / Education Typically requires a 4 year degree in electrical/electronics and a minimum...

Position: Hardware Engineer Job Description: What You'll Be Doing: Gather requirements and finalize the architecture for the next-gen HMI module based on various SoCs including Qualcomm and NXP, Reneses, ESP Electronics Design & Development, select components and design schematics, collaborate with customer on component placement and PCB size. Do layout design and high-speed interface guidelines, perform signal integrity, power integrity, and thermal analysis and review Gerber files. Testing Design sensor boards (Motion, Light, Accelerometer, Temperature, Gyroscope, Magnetometer, calibrate sensors) and integrate with HMI Module. Protocol experience in SPI, I2C, Serial, UART, USB, DSI, CSI Coordinate with fabrication, assembly, and integration teams, conduct bring-up, functional, EDVT, thermal, and performance testing. What We Are Looking For: Experience / Education Typically requires a 4 year degree in   electrical/electronics   and a minimum of 8...

Description: As part of the Engineering and Technology Raptor Avionics Organization at Lockheed Martin Space, this Electronics Engineering role supports the development of electronic hardware and test systems that ensure mission success for spacecraft and ground systems. Location: This position does not support teleworking ;the selected candidate will be located near our Lockheed Martin Space facility in: Littleton CO and be expected to work a flexible 9x80 schedule in the office full-time. What does this role look like? • Our team develops electronic circuits, test equipment, and hardware used in spacecraft integration and environmental test environments. • As a Circuit Design Engineer, you will design, develop, integrate, and sustain electronic circuits and test equipment while working in a collaborative, multidisciplinary engineering environment. • This role includes circuit design, schematic development, hardware integration, and support of hardware test and...

Description: You will be the Manufacturing Controls/Robotics Engineer for the Robotics Engineering Team. Our team is responsible for delivering cutting‑edge automated manufacturing solutions that enable high‑rate production of missiles, launch systems, and ground vehicles. What You Will Be Doing As the Manufacturing Controls/Robotics Engineer you will be responsible for concept, design, and documentation of automated manufacturing equipment that supports site processes and meets production‑rate goals. Your responsibilities will include, but are not limited to: Troubleshoot and resolve existing electrical controls equipment such as PLCs, AC & DC motors, servo drives, and variable frequency drives. Improve existing controls equipment to enhance safety, productivity, and efficiency. Develop electrical automation designs from hardware specifications into complete construction packages for fabrication, assembly, checkout, and startup. Create design...

Position: Hardware Electronics Lab Technician (Avelabs LLC Egypt) Job Description: Job Summary   Avelabs (an Arrow Company), a leading automotive software engineering services provider, is seeking a skilled and detail-oriented Hardware Electronics Lab Technician to support prototyping, testing, and validation activities. The ideal candidate will assist engineers in assembling and troubleshooting electronic circuits and systems in a laboratory environment. Key Responsibilities   Assist in the assembly, testing, and debugging of electronic circuits and hardware prototypes.   Perform soldering (SMT and through-hole) and rework on PCBs.   Set up and operate laboratory equipment such as oscilloscopes, multimeters, power supplies, and signal generators.   Support board bring-up, validation, and troubleshooting activities.   Maintain and organize laboratory equipment, tools, and inventory....

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. By optimizing the power distribution and reliability of critical test facilities, you will directly enable the successful verification and validation of advanced naval technologies, ensuring national security through engineering excellence. THE WORK Electrical Engineering position tasked with ensuring the logical and systematic conversion of customer or product requirements into executable solutions. This may include requirements and concept of operations development, system integration, verification and validation, and system transition. We are seeking...

Description: As a Quality Inspector, you will support test activities across multiple Assembly, Test, and Launch Operations (ATLO) areas at the Littleton, CO facility. The current primary program supported will be GPS. You will be performing critical inspections and working collaboratively with multi-functional teams to execute final assembly and testing. By working collaboratively with a team of world class technicians and engineers, our team ensures that the quality and continuous improvement is built into every level of the test process. You will also work collaboratively to resolve test anomalies, work to become an expert on requirements and specifications, and interact with the customer as needed. You will be an integral part of ensuring our dedication to 100% mission success is upheld. Typical role responsibilities include: • Providing a variety of inspections on components as directed by procedures • interpreting engineering drawings and specifications to execute test...

Description: You will be a Engineering Aide at Lockheed Martin, turning engineering drawings into high quality electronic and electro mechanical assemblies. Our team supports both Engineering and Manufacturing Production, ensuring reliable hardware for critical defense programs. What You Will Be Doing As a Engineering Aide you will be responsible for building circuit cards, and wiring harnesses, then integrating them into single or multi bay cabinet units. You will work independently while collaborating closely with Engineers, Draftsmen, Procurement, and Quality Inspectors to keep projects on schedule and on spec. Your responsibilities will include: • Placing and soldering components on circuit cards and sub-assemblies according to blueprints, schematics, and engineering guides. • Fabricating wiring harnesses, including connector pinning, de pinning, and installation of mounting hardware. • Assembling lower-level builds into complete cabinet assemblies for...

Description: As a Quality Inspector, you will support test activities across multiple Assembly, Test, and Launch Operations (ATLO) areas at the Littleton, CO facility. The current primary program supported will be GPS. You will be performing critical inspections and working collaboratively with multi-functional teams to execute final assembly and testing. By working collaboratively with a team of world class technicians and engineers, our team ensures that the quality and continuous improvement is built into every level of the test process. You will also work collaboratively to resolve test anomalies, work to become an expert on requirements and specifications, and interact with the customer as needed. You will be an integral part of ensuring our dedication to 100% mission success is upheld. Typical role responsibilities include: • Providing a variety of inspections on components as directed by procedures • interpreting engineering drawings and specifications to execute test...

Description: Join Our Team as an Electronics Engineer for the FBM Reentry Avionics Team, where you will work on the development of a sophisticated state-of-the-art avionics product in a world class Integrated Product Development environment. Location: This position does not support teleworking ;the selected candidate will be located near our Lockheed Martin Space facility in: King of Prussia PA and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready...

Description: You will be the In-Process Build Inspector for the Lockheed Martin Missiles and Fire Control (MFC) team. Our team is responsible for ensuring the quality and functionality of electrical, electronic, and mechanical systems, among others, to meet company and customer requirements. What You Will Be Doing As the In-Process Build Inspector you will be responsible for conducting in‑process inspections that verify assemblies meet engineering specifications and performance standards. Your responsibilities will include, but are not limited to: Perform detailed inspections of electrical, electronic, and mechanical components during build. Compare work against drawings, specifications, and test data. Document findings and generate non‑conformance reports. Collaborate with engineers and production staff to resolve quality issues. Support continuous‑improvement initiatives to enhance product reliability. Why Join Us The ideal candidate...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary: SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. SAIC is looking for someone to support the MK710 program here at the SAIC Middletown office. The job will entail a complex/detailed troubleshooting effort along with full redesign engineering effort. Location: The work will be at both 28 Jacome Way, Middletown, RI, and the Naval Undersea Warfare Center (NUWC) Division Newport. Work Schedules: Flexible work schedule...

Description: You will be the Electrical Engineer for the Integrated Air & Missile Defense – Advanced Programs (IAMD AP) Long Endurance Electronic Decoy (LEED) team. Our team is racing to deliver a next generation decoy that defeats anti ship missile threats for the U.S. Navy, driving rapid hardware development across air vehicle, launcher, control electronics, and ship integration subsystems. What You Will Be Doing As the Electrical Engineer you will act as the technical backbone for the LEED program, leveraging fast paced, multidisciplinary development methods to move concepts to flight ready hardware. Your responsibilities will include: • Creating and iterating electrical schematics, PCB layouts, and wiring harnesses for the air vehicle, launcher, launch mechanism, and control electronics. • Applying mechanical design principles to ensure proper packaging, thermal management, and structural integrity of each subsystem. • Troubleshooting system issues in the lab and on...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. Join us in shaping a new era in space and find a career that's built for you. This is an...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary: SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. SAIC is looking for someone to support the MK710 program here at the SAIC Middletown office. The job will entail a complex/detailed troubleshooting effort along with full redesign engineering effort. Location: The work will be at both 28 Jacome Way, Middletown, RI, and the Naval Undersea Warfare Center (NUWC) Division Newport. Work Schedules: Flexible work schedule...