11 electronic test technician jobs found

Description SAIC is seeking an Engineering Technician IV to join our team in Crane, Indiana, supporting advanced mixed-signal, digital, and RF electronic systems. In this hands-on role, you will test, troubleshoot, and repair complex hardware down to the component level using schematics, block diagrams, and specialized test equipment. You will work closely with engineers, fellow technicians, and government personnel to ensure reliable performance of critical defense systems. Position Description: RF Digital Circuit technical support: tests, troubleshoots, and repairs complex mixed-signal, digital, and radio frequency electronic hardware down to the component level. Circuit Analysis & Repair: Isolate faults on printed circuit boards (PCBs), modules, and cable assemblies using schematics and block diagrams. Conduct routine repair, retrofit, systems integration, calibration and testing; in-line repair and testing; operation of test equipment; coordinate test schedules;...

Description SAIC is seeking an Electrical Technician in support of a full-rate production program at the Bedford, Indiana Production Facility. This is a hands-on, production-floor role supporting the fabrication, integration, assembly, and testing of mission-critical containerized systems in direct support of systems operations. Key Responsibilities: Fabricate, assemble, and install electrical harnesses, cable assemblies, and wiring systems in accordance with engineering drawings and work instructions Perform crimping, soldering, and termination of connectors Build and test battery cable assemblies, power distribution systems, and low-voltage control wiring Read and interpret electrical schematics, wiring diagrams, and assembly drawings Perform continuity, insulation resistance, and functional testing of completed cable assemblies and electrical systems Support integration of communications equipment, RF systems, antennas, and electronic...

Description SAIC is seeking an SCA Engineering Technician IV-2M to support the US Navy in Crane, IN. Position Description: Perform Miniature/Microminiature Electronics Repair (2M) supporting testing and repair of Circuit Card Assemblies (CCA) and Electronic Modules (EM). Performs corrective maintenance on circuit cards and electronic modules by troubleshooting and repairing the faulty cards and modules . Testing and evaluation: Conducting tests and experiments, analyzing data, and documenting findings. Conduct routine repair, retrofit, systems integration, calibration and testing; in-line repair and testing; operation of test equipment Installing, maintaining, repairing, and modifying various types of equipment, including electrical, electronic, and mechanical systems. Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions. Conduct or...

Description SAIC is seeking an Integration Technician for our customer site in North Charleston, SC to support MADIS (Marine Air Defense Integrated System). Primary function includes activities such as basic machining, modification, fabrication, assembly and test for metal, electrical and COTS components. Job Description: Will be primarily tasked with performing moderate to complex vehicle integration tasks to include cable routing, metal work installations, and technical support to integrate, install, modify, and perform upgrades in support of C5ISR systems May assemble cabinets, chassis, consoles, or similar devices and install them with electronic or electro-mechanical equipment Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions Construct components, subunits, or simple models, adapt standard equipment, and troubleshoot system failures through various skill...

Description: Lockheed Martin Space Systems Company is seeking candidates who are energized and passionate about helping us build the space technologies of tomorrow. We are going to Mars and beyond! Join us in the journey! The Electronics Test/Assembly Inspector provides intermittent and final inspections and test support for electronics manufacturing: circuit boards, wire harnesses, battery, microelectronics (RF/hybrids), and electronic box assemblies. Additionally, the Inspector provides witness test, connector mate/demate and torque applications, prepares paper and electronic documentation on nonconforming hardware, interprets drawings, schematics, sketches, specifications and standards, and works from manufacturing work instructions and provides surveillance when needed. This position is located at a facility that requires special access. Must be a U.S. Citizen. Basic Qualifications: - Electronic Circuit Card experience or equivalent technical proficiency. - Quality...

Description: You will be an Aircraft Electrician I for our Special Operations Forces Global Logistic Support Services (SOF GLSS) team, based in Crestview, FL. Our team is responsible for modifying military aircraft and ground vehicles to meet the evolving operational needs of the SOF community. What You Will Be Doing As an Aircraft Electrician I, you will be responsible for: • Install, route, terminate, and test electrical cables and harnesses on C-130J aircraft. • Remove and install aircraft components as required. • Interpret engineering drawings and blueprints such as electrical wiring diagrams, routing drawings, and harness assembly drawings. • Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, and other specifications to determine feasibility and method of install/modification. • Use and apply hand tools, power tools, work stands, support equipment, and special tools/calibrated test equipment. • Comprehend documents such as safety...

Description: IAM Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, Vandenburg Air Force Base or Eastern Range facilities must apply to open requisitions on Brass Ring to be considered for the position. Fabricate, visually verify and rework all varieties and complexities of electronic assemblies and sub-assemblies for engineering development, qualification and production purposes. Perform operations such as component lead forming, soldering, trimming, flux removal, wire wrap, wire routing and securing wires, and related mechanical assembly of electrical chassis. Work from schematics, blueprint wiring lists, engineering sketches, and other information Integrate planning documentation, specification requirements and design changes into the process of building electronic equipment. Use best shop practice and available sources of information to determine sequence rework of operations. Perform operations verification checks including...

Description: You will be an Electronics Technician II, applying your comprehensive technical knowledge to solve complex problems and maintain, repair, troubleshoot, modify, and install various types of electronic equipment and related devices. Our team is responsible for ensuring the optimal performance of electronic systems, and we're looking for a skilled and experienced technician to join our team. What You Will Be Doing As an Electronics Technician II, you will be responsible for: • Interpreting manufacturers' manuals and technical documents to solve complex problems • Troubleshooting and repairing electronic equipment, including radar, radio, television, telecommunication, sonar, and navigational aids • Installing, modifying, and maintaining electronic systems, including personal and main frame computers and terminals • Evaluating performance and reliability of prototype or production mode equipment and recommending changes to simplify assembly and maintenance • Reading...

Description SAIC is seeking multiple levels of Cable Fabrication Technicians to join our team in North Charleston, SC to support the USMC to perform cable fabrication work by reading and interpreting drawings, schematics, and cable run sheets to assemble cables. Job Description: Perform cable fabrication work for multiple government projects Read and interpret drawings, schematics, and cable run sheets to verify correct build of cables Assemble cables to specifications via cable run sheets and/or schematics; to include but not limited to multi-pin connectors and RF cables Assemble cable harnesses and junction box assemblies; including MIL-SPEC cylindrical connectors, back shells, terminal boxes, and radio frequency (RF) Proficient in the use, care and maintenance of crimp tools, heat gun, and various electrical and mechanical tools Maintain, troubleshoot, test and check all of the cables that are built and produced in the shop...

Description: You will be an Aircraft Electrician II, responsible for installing, testing, and maintaining electrical systems and components on C-130J aircraft. Our team is committed to delivering exceptional results, and we're looking for a highly skilled and experienced aircraft electrician to join our team. What You Will Be Doing As an Aircraft Electrician II, you will be responsible for: • Installing, clamping, terminating, and testing electrical cables and harnesses on C-130J aircraft • Inspecting, troubleshooting, and maintaining C-130J avionic and electrical systems, components, and related equipment • Removing and installing aircraft components as required, and conducting functional tests of components and systems • Assisting with aircraft launch and recovery, servicing, rigging, jacking, towing, and inspections • Reading and interpreting manufacturers' maintenance manuals, service bulletins, technical data, and other specifications to determine feasibility and...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary : SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. SAIC is looking for someone to support the PTF program as the local Middletown office supports automated test equipment design. The job will entail a host of different projects supporting a host of Navy Underwater technical projects. Location : The work will be at both 28 Jacome Way, Middletown, RI, and the Naval Undersea Warfare Center (NUWC) Division Newport. Work...