49 electronics jobs found

Description: Join Our Team as an Avionics Electronics Engineer where you will work on developing the new Long Range Hypersonic Weapon (LRHW), leveraging our decades of hypersonic experience and expertise. Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Huntsville AL and be expected to work a flexible 9x80 schedule in the office full-time. Ready for a challenge at the speed of Hypersonic? Come join Lockheed Martin's Long Range Hypersonic Weapon team. Our system will travel at Mach 5 (over a mile per second)! Helping us create a system that goes that fast means overcoming several difficult physics and engineering challenges. You will be integrating hypersonic missile technology into an Army battery on a highly accelerated schedule to deliver a hypersonic operational prototype system to the Soldier. What does this role look like? The role focuses on designing and developing electrical interfaces...

Description: Join Our Team as an Electronics Engineer where you will work on the development of a sophisticated state-of-the-art avionics product in a world class Integrated Product Development environment. Location: This position does not support teleworking; the selected candidate will be located near our Lockheed Martin Space facility in: Huntsville AL and be expected to work in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century...

Description: Lockheed Martin Space Systems Company is seeking candidates who are energized and passionate about helping us build the space technologies of tomorrow. We are going to Mars and beyond! Join us in the journey! The Electronics Test/Assembly Inspector provides intermittent and final inspections and test support for electronics manufacturing: circuit boards, wire harnesses, battery, microelectronics (RF/hybrids), and electronic box assemblies. Additionally, the Inspector provides witness test, connector mate/demate and torque applications, prepares paper and electronic documentation on nonconforming hardware, interprets drawings, schematics, sketches, specifications and standards, and works from manufacturing work instructions and provides surveillance when needed. Basic Qualifications: Electronic Circuit Card experience or equivalent technical proficiency. Quality Assurance, instrument/equipment Technician Quality Assurance, Product inspection, mechanical inspection...

Position: Hardware Electronics Lab Technician (Avelabs LLC Egypt) Job Description: Job Summary   Avelabs (an Arrow Company), a leading automotive software engineering services provider, is seeking a skilled and detail-oriented Hardware Electronics Lab Technician to support prototyping, testing, and validation activities. The ideal candidate will assist engineers in assembling and troubleshooting electronic circuits and systems in a laboratory environment. Key Responsibilities   Assist in the assembly, testing, and debugging of electronic circuits and hardware prototypes.   Perform soldering (SMT and through-hole) and rework on PCBs.   Set up and operate laboratory equipment such as oscilloscopes, multimeters, power supplies, and signal generators.   Support board bring-up, validation, and troubleshooting activities.   Maintain and organize laboratory equipment, tools, and inventory....

Description: As part of the Engineering and Technology Raptor Avionics Organization at Lockheed Martin Space, this Electronics Engineering role supports the development of electronic hardware and test systems that ensure mission success for spacecraft and ground systems. Location: This position does not support teleworking ;the selected candidate will be located near our Lockheed Martin Space facility in: Littleton CO and be expected to work a flexible 9x80 schedule in the office full-time. What does this role look like? • Our team develops electronic circuits, test equipment, and hardware used in spacecraft integration and environmental test environments. • As a Circuit Design Engineer, you will design, develop, integrate, and sustain electronic circuits and test equipment while working in a collaborative, multidisciplinary engineering environment. • This role includes circuit design, schematic development, hardware integration, and support of hardware test and...

Description: Join Our Team as an Electronics Engineer for the FBM Reentry Avionics Team, where you will work on the development of a sophisticated state-of-the-art avionics product in a world class Integrated Product Development environment. Location: This position does not support teleworking ;the selected candidate will be located near our Lockheed Martin Space facility in: King of Prussia PA and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready...

Description: Lockheed Martin Space Systems Company is seeking candidates who are energized and passionate about helping us build the space technologies of tomorrow. We are going to Mars and beyond! Join us in the journey! The Electronics Test/Assembly Inspector provides intermittent and final inspections and test support for electronics manufacturing: circuit boards, wire harnesses, battery, microelectronics (RF/hybrids), and electronic box assemblies. Additionally, the Inspector provides witness test, connector mate/demate and torque applications, prepares paper and electronic documentation on nonconforming hardware, interprets drawings, schematics, sketches, specifications and standards, and works from manufacturing work instructions and provides surveillance when needed. Basic Qualifications: Electronic Circuit Card experience or equivalent technical proficiency. Quality Assurance, instrument/equipment Technician Quality Assurance, Product inspection, mechanical inspection...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. Join us in shaping a new era in space and find a career that's built for you. This is an...

Description SAIC is seeking skilled electricians and electronics technicians to join our team to support diverse projects across various platforms and environments. In this role, you'll play a key part in maintaining, troubleshooting, and installing critical electrical and electronic systems, ensuring mission success. Key Duties and Responsibilities: Install, maintain, repair, troubleshoot, and modify a variety of electrical and electronic systems, including but not limited to: Power distribution, lighting systems, and electronic control systems. Transmitting and receiving equipment such as radar, radios, telecommunications, sonar, and navigational aids. Computing devices ranging from personal systems to mainframe environments. Industrial, medical, measuring, and robotic devices. Perform preventative and corrective maintenance, including reading and interpreting complex electrical and electronic schematics. Determine equipment malfunctions and...

Description: You will be an Aircraft Electrician III for our traveling modification team, with more than 80% of your work completed on the road. Our team is responsible for installing, testing, and maintaining electrical systems on C-130J and CV-22 aircraft, and we're looking for a skilled Aircraft Electrician to join our team. What You Will Be Doing As an Aircraft Electrician III, you will be responsible for assisting with the installation, clamping, terminating, and testing of electrical cables and harnesses on C-130J and CV-22 aircraft. You will need to have a strong understanding of avionics systems, including Communications/Navigations, Guidance Control, Electronic Warfare, and Electro/Environmental systems. Your responsibilities will include: • Installing, clamping, terminating, and testing electrical cables and harnesses • Inspecting, troubleshooting, and maintaining avionic/electrical systems, components, and related equipment • Removing and installing aircraft...

Description: You will be an Aircraft Electrician II, responsible for installing, testing, and maintaining electrical systems and components on C-130J aircraft. Our team is committed to delivering exceptional results, and we're looking for a highly skilled and experienced aircraft electrician to join our team. What You Will Be Doing As an Aircraft Electrician II, you will be responsible for: • Installing, clamping, terminating, and testing electrical cables and harnesses on C-130J aircraft • Inspecting, troubleshooting, and maintaining C-130J avionic and electrical systems, components, and related equipment • Removing and installing aircraft components as required, and conducting functional tests of components and systems • Assisting with aircraft launch and recovery, servicing, rigging, jacking, towing, and inspections • Reading and interpreting manufacturers' maintenance manuals, service bulletins, technical data, and other specifications to determine feasibility and...

Description: This position is for a Mid-level Technician whose primary assignment will consist of engineering hardware fabrication support, troubleshooting, testing and laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25 pounds, pushing and pulling of electronic equipment on carts, and working on test stations. These responsibilities will include fabrication of harnesses, electronic/electrical chassis and subassembly panels, mechanical rack fabrication, and various modifications to mechanical racks and electronic test stations using development engineering drawings. Ability to visualize and build electronic racks with minimal defects and little to no supervision. Candidate must be capable of working independently and in a team environment and discussing technical issues with Build Lead. Demonstrated problem-solving and troubleshooting skills, with the ability to analyze technical issues and propose effective solutions....

Position: Técnico de Mantenimiento de Equipos (Sector Electrónico) Job Description: Arrow Electronics is looking for an Equipment Maintenance Technician to join our team in Guadalajara! What You'll Be Doing Responsible for the installation, maintenance and repair of facility equipment related to the functional operation of the value-added center. May be involved in miscellaneous facility structural repairs and maintenance as needed or required. Demonstrates basic competency is at least two specialty areas. Depending on facility, specialties include basic machining, welding, carpentry, etc. Understands the basic safety principles of all pieces of equipment. Takes direction from supervisor and level 2 technician in terms of prioritization. Escalates issues beyond scope of expertise to level II tech or tech supervisor. Able to deal with all levels of staff, including verbal interactions with peer technicians, PDC operators, crew leads and supervisors, technician...

Description: You will be the Electronic Test Tech/Inspector for our team. Our team is responsible for ensuring the quality and integrity of our electronic systems through rigorous testing and inspection, implementing and developing procedures to verify product functionality. What You Will Be Doing As the Electronic Test Tech/Inspector, you will be responsible for performing tests, inspections, and verifications of our manufactured or purchased hardware, utilizing a wide range of techniques and equipment to ensure compliance with industry standards and contractual requirements. Your responsibilities will include: -Performing tests, inspections, and verifications of hardware using various techniques, such as visual examination, dimensional measurement, and electronic testing equipment -Conducting product verifications to required specifications, procedures, and industry standards -Maintaining records and logs, and performing general and periodic surveillance of work and storage...

Description: You will be the Electronic Test Tech for the Test & Inspection Team. Our team is responsible for ensuring quality and compliance of company‑manufactured and purchased electrical hardware. What You Will Be Doing As the Electronic Test Tech you will be responsible for executing and supporting a wide range of test, inspection, and verification activities on electrical hardware. Your responsibilities will include, but are not limited to: Perform and assist with electrical hardware testing, inspections, and verifications using specialized equipment. Conduct product verification against specifications, drawings, and quality procedures. Maintain and calibrate inspection instruments and ensure their serviceability. Document test results, generate records, and support certification tasks. Collaborate with cross‑functional departments and customers to meet schedules and improve processes. Why Join Us The ideal candidate is a...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. By optimizing the power distribution and reliability of critical test facilities, you will directly enable the successful verification and validation of advanced naval technologies, ensuring national security through engineering excellence. THE WORK Electrical Engineering position tasked with ensuring the logical and systematic conversion of customer or product requirements into executable solutions. This may include requirements and concept of operations development, system integration, verification and validation, and system transition. We are seeking...

Description: You will be the Manufacturing Controls/Robotics Engineer for the Robotics Engineering Team. Our team is responsible for delivering cutting‑edge automated manufacturing solutions that enable high‑rate production of missiles, launch systems, and ground vehicles. What You Will Be Doing As the Manufacturing Controls/Robotics Engineer you will be responsible for concept, design, and documentation of automated manufacturing equipment that supports site processes and meets production‑rate goals. Your responsibilities will include, but are not limited to: Troubleshoot and resolve existing electrical controls equipment such as PLCs, AC & DC motors, servo drives, and variable frequency drives. Improve existing controls equipment to enhance safety, productivity, and efficiency. Develop electrical automation designs from hardware specifications into complete construction packages for fabrication, assembly, checkout, and startup. Create design...

Position: Quality Inspector I Job Description: Arrow Electronics | Reno, NV Shift:  8:30 AM – 5:00 PM, Monday–Friday. Hourly Rate: $22.50 USD Hourly Pay: up to $25.00 USD for hours worked between 6:00 PM – 6:00 AM. Overtime: Regular OT and occasional Saturdays as needed. Arrow Electronics is looking for energetic and enthusiastic individuals that work well in a fast-paced computer and electronics distribution center. This position supports the operation by performing various warehouse functions, including receiving, product sort and separation, picking inventory for orders, packaging orders based on product type, and shipping functions. Overtime work can be regular and is required based on business goals.   Impeccable attendance is required. What you'll be Doing: Responsible for inspecting assembled products to ensure adherence to documented requirements. Complete physical inspections of product. Audit against documents and procedures....

Position: Hardware Engineer(eInfochips Inc) Job Description: What You'll Be Doing: Gather requirements and finalize the architecture for the next-gen HMI module based on various SoCs including Qualcomm and NXP, Reneses, ESP Electronics Design & Development, select components and design schematics, collaborate with customer on component placement and PCB size. Do layout design and high-speed interface guidelines, perform signal integrity, power integrity, and thermal analysis and review Gerber files. Testing Design sensor boards (Motion, Light, Accelerometer, Temperature, Gyroscope, Magnetometer, calibrate sensors) and integrate with HMI Module. Protocol experience in SPI, I2C, Serial, UART, USB, DSI, CSI Coordinate with fabrication, assembly, and integration teams, conduct bring-up, functional, EDVT, thermal, and performance testing. What We Are Looking For: Experience / Education Typically requires a 4 year degree in electrical/electronics and a minimum...

Position: Hardware Engineer Job Description: What You'll Be Doing: Gather requirements and finalize the architecture for the next-gen HMI module based on various SoCs including Qualcomm and NXP, Reneses, ESP Electronics Design & Development, select components and design schematics, collaborate with customer on component placement and PCB size. Do layout design and high-speed interface guidelines, perform signal integrity, power integrity, and thermal analysis and review Gerber files. Testing Design sensor boards (Motion, Light, Accelerometer, Temperature, Gyroscope, Magnetometer, calibrate sensors) and integrate with HMI Module. Protocol experience in SPI, I2C, Serial, UART, USB, DSI, CSI Coordinate with fabrication, assembly, and integration teams, conduct bring-up, functional, EDVT, thermal, and performance testing. What We Are Looking For: Experience / Education Typically requires a 4 year degree in   electrical/electronics   and a minimum of 8...