17 hardware engineer jobs found

Position: Hardware Engineer Job Description: What You'll Be Doing: Gather requirements and finalize the architecture for the next-gen HMI module based on various SoCs including Qualcomm and NXP, Reneses, ESP Electronics Design & Development, select components and design schematics, collaborate with customer on component placement and PCB size. Do layout design and high-speed interface guidelines, perform signal integrity, power integrity, and thermal analysis and review Gerber files. Testing Design sensor boards (Motion, Light, Accelerometer, Temperature, Gyroscope, Magnetometer, calibrate sensors) and integrate with HMI Module. Protocol experience in SPI, I2C, Serial, UART, USB, DSI, CSI Coordinate with fabrication, assembly, and integration teams, conduct bring-up, functional, EDVT, thermal, and performance testing. What We Are Looking For: Experience / Education Typically requires a 4 year degree in   electrical/electronics   and a minimum of 8...

Position: Hardware Engineer(eInfochips Inc) Job Description: What You'll Be Doing: Gather requirements and finalize the architecture for the next-gen HMI module based on various SoCs including Qualcomm and NXP, Reneses, ESP Electronics Design & Development, select components and design schematics, collaborate with customer on component placement and PCB size. Do layout design and high-speed interface guidelines, perform signal integrity, power integrity, and thermal analysis and review Gerber files. Testing Design sensor boards (Motion, Light, Accelerometer, Temperature, Gyroscope, Magnetometer, calibrate sensors) and integrate with HMI Module. Protocol experience in SPI, I2C, Serial, UART, USB, DSI, CSI Coordinate with fabrication, assembly, and integration teams, conduct bring-up, functional, EDVT, thermal, and performance testing. What We Are Looking For: Experience / Education Typically requires a 4 year degree in electrical/electronics and a minimum...

Description: You will be the Electromechanical Design Engineer for the Missile & Radar Electronics Packaging team. Our team delivers rugged enclosures, chassis, cold plates, card guides, wedge locks, and interconnect assemblies that enable high performance missile and radar hardware to operate reliably in demanding environments. What You Will Be Doing As the Electromechanical Design Engineer you will create and mature the mechanical and thermal solutions that marry the electronics to their protective structures. You’ll partner with circuit card designers, suppliers, and manufacturing partners to turn concepts into production ready hardware. Your responsibilities will include: • Developing detailed 3 D models and 2 D drawings in PTC Creo (ASME Y14.5/GD&T) and maintaining configuration control in Windchill (PDM/PLM). • Coordinating with circuit card designers to verify that CCA form factors, component heights, and connector placements fit the mechanical chassis and...

Description: We are hosting a Lockheed Martin Space In-Person hiring event in the middle of June and it is in the vicinity of King of Prussia, PA. This event will be by invitation only and the exact date and location will be disclosed at a later date. The Electronics Engineer & Electrical Engineer roles do require a clearance to start. Please apply to be considered. Everyone knows how hard it is to get an interview with Lockheed Martin. Those that apply and get selected to attend will get the chance to meet with multiple managers as well as senior managers. This is your chance to meet face to face with our hiring team. These events have helped many individuals enhance the direction of their career. :) This hiring event is for experienced professionals and is for external candidates only. We are hiring levels 2-5. If you are interested in joining Lockheed Martin as a electronics engineer or electrical engineer, please apply to this requisition. Basic...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary: SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. SAIC is looking for someone to support the MK710 program here at the SAIC Middletown office. The job will entail a complex/detailed troubleshooting effort along with full redesign engineering effort. Location: The work will be at both 28 Jacome Way, Middletown, RI, and the Naval Undersea Warfare Center (NUWC) Division Newport. Work Schedules: Flexible work schedule...

Description: Join Our Team as an Electronics Engineer III where you will develop sophisticated electronics products in a world class Integrated Product Team. Location: This position does not support teleworking ;the selected candidate will be located near our Lockheed Martin Space facility in: King of Prussia PA and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision....

Description: You will be the Electrical Engineer for the Integrated Air & Missile Defense – Advanced Programs (IAMD AP) Long Endurance Electronic Decoy (LEED) team. Our team is racing to deliver a next generation decoy that defeats anti ship missile threats for the U.S. Navy, driving rapid hardware development across air vehicle, launcher, control electronics, and ship integration subsystems. What You Will Be Doing As the Electrical Engineer you will act as the technical backbone for the LEED program, leveraging fast paced, multidisciplinary development methods to move concepts to flight ready hardware. Your responsibilities will include: • Creating and iterating electrical schematics, PCB layouts, and wiring harnesses for the air vehicle, launcher, launch mechanism, and control electronics. • Applying mechanical design principles to ensure proper packaging, thermal management, and structural integrity of each subsystem. • Troubleshooting system issues in the lab and on...

Description: You will be the Manufacturing Controls/Robotics Engineer for the Robotics Engineering Team. Our team is responsible for delivering cutting‑edge automated manufacturing solutions that enable high‑rate production of missiles, launch systems, and ground vehicles. What You Will Be Doing As the Manufacturing Controls/Robotics Engineer you will be responsible for concept, design, and documentation of automated manufacturing equipment that supports site processes and meets production‑rate goals. Your responsibilities will include, but are not limited to: Troubleshoot and resolve existing electrical controls equipment such as PLCs, AC & DC motors, servo drives, and variable frequency drives. Improve existing controls equipment to enhance safety, productivity, and efficiency. Develop electrical automation designs from hardware specifications into complete construction packages for fabrication, assembly, checkout, and startup. Create design...

Description: Join Our Team as an Avionics Electronics Engineer where you will work on developing the new Long Range Hypersonic Weapon (LRHW), leveraging our decades of hypersonic experience and expertise. Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Huntsville AL and be expected to work a flexible 9x80 schedule in the office full-time. Ready for a challenge at the speed of Hypersonic? Come join Lockheed Martin's Long Range Hypersonic Weapon team. Our system will travel at Mach 5 (over a mile per second)! Helping us create a system that goes that fast means overcoming several difficult physics and engineering challenges. You will be integrating hypersonic missile technology into an Army battery on a highly accelerated schedule to deliver a hypersonic operational prototype system to the Soldier. What does this role look like? The role focuses on designing and developing electrical interfaces...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary : SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. SAIC is looking for someone to support the PTF program as the local Middletown office supports automated test equipment design. The job will entail a host of different projects supporting a host of Navy Underwater technical projects. Location : The work will be at both 28 Jacome Way, Middletown, RI, and the Naval Undersea Warfare Center (NUWC) Division Newport. Work...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary: SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. SAIC is looking for someone to support the MK710 program here at the SAIC Middletown office. The job will entail a complex/detailed troubleshooting effort along with full redesign engineering effort. Location: The work will be at both 28 Jacome Way, Middletown, RI, and the Naval Undersea Warfare Center (NUWC) Division Newport. Work Schedules: Flexible work schedule...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK - Perform preventive‑maintenance inspections, functional tests, and calibrations; diagnose faults using schematics, service manuals, and ECOs (Engineering Change Order); replace/repair boards, modules, connectors, and firmware. - Disassemble, inspect, and repair COLT test kits (signal generators, load banks, adapters); re‑term or replace internal...

Description: You will be the Inspector Sr for the Quality Inspection team. Our team is responsible for ensuring the highest product quality across the Lufkin facility. What You Will Be Doing As the Inspector Sr you will be responsible for leading quality inspections, ensuring compliance with standards, and driving continuous improvement. Your responsibilities will include, but are not limited to: Conduct thorough inspections of incoming and outgoing products. Identify and document non-conformances and recommend corrective actions. Collaborate with production teams to implement quality improvements. Maintain inspection records and ensure compliance with industry standards. Provide training and guidance on quality inspection procedures. Why Join Us We are looking for a collaborative professional who thrives on precision and takes pride in delivering flawless results. This role offers the chance to influence product excellence at a key...

Description: You will be a Engineering Aide at Lockheed Martin, turning engineering drawings into high quality electronic and electro mechanical assemblies. Our team supports both Engineering and Manufacturing Production, ensuring reliable hardware for critical defense programs. What You Will Be Doing As a Engineering Aide you will be responsible for building circuit cards, and wiring harnesses, then integrating them into single or multi bay cabinet units. You will work independently while collaborating closely with Engineers, Draftsmen, Procurement, and Quality Inspectors to keep projects on schedule and on spec. Your responsibilities will include: • Placing and soldering components on circuit cards and sub-assemblies according to blueprints, schematics, and engineering guides. • Fabricating wiring harnesses, including connector pinning, de pinning, and installation of mounting hardware. • Assembling lower-level builds into complete cabinet assemblies for delivery to...

Description: You will be the In-Process Build Inspector for the Lockheed Martin Missiles and Fire Control (MFC) team. Our team is responsible for ensuring the quality and functionality of electrical, electronic, and mechanical systems, among others, to meet company and customer requirements. What You Will Be Doing As the In-Process Build Inspector you will be responsible for conducting in‑process inspections that verify assemblies meet engineering specifications and performance standards. Your responsibilities will include, but are not limited to: Perform detailed inspections of electrical, electronic, and mechanical components during build. Compare work against drawings, specifications, and test data. Document findings and generate non‑conformance reports. Collaborate with engineers and production staff to resolve quality issues. Support continuous‑improvement initiatives to enhance product reliability. Why Join Us The ideal candidate...

Description: You will be the Electrical Engineering Asc Mgr for the Test Equipment Fabrication team. Our team is responsible for delivering technical excellence and mission success across various Lines of Business, driving innovation and collaboration. What You Will Be Doing As the Electrical Engineering Asc Mgr, you will be responsible for leading the engineering and technology laboratory team to achieve technical excellence and mission success. You will oversee the development and implementation of innovative solutions to drive business growth and improvement. Your responsibilities will include: Leading a team of engineers and technicians to design, develop, and test equipment Collaborating with cross-functional teams to identify and prioritize project requirements Developing and managing project plans, schedules, and budgets Ensuring compliance with industry standards, regulations, and company policies Identifying and mitigating risks to ensure project success Why Join Us...

Description: This position is for a Mid-level Technician whose primary assignment will consist of engineering hardware fabrication support, troubleshooting, testing and laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25 pounds, pushing and pulling of electronic equipment on carts, and working on test stations. These responsibilities will include fabrication of harnesses, electronic/electrical chassis and subassembly panels, mechanical rack fabrication, and various modifications to mechanical racks and electronic test stations using development engineering drawings. Ability to visualize and build electronic racks with minimal defects and little to no supervision. Candidate must be capable of working independently and in a team environment and discussing technical issues with Build Lead. Demonstrated problem-solving and troubleshooting skills, with the ability to analyze technical issues and propose effective solutions. Ability...