27 jobs found in Fort Worth

Description: You will be the Systems Integration & Test Engineer Sr for the Architecture, Design, Integration & Test (ADIT) – F-35 Sensor Systems Integration & Test (SI&T) team which is responsible for mission system capability integration & maturation, verification testing and regression testing for all F-35 modernization efforts. What You Will Be Doing As the Systems Integration & Test Engineer Sr you will be responsible for technical test planning and execution of the F‑35 Sensor Suite, including Radar, Electronic Warfare (EW), Countermeasures (CM), Electro‑Optical (EO)sensors and Fusion. You will ensure the SI&T process follows prescribed engineering standards and continuously improves those processes. Your responsibilities will include: Generate test plans and detailed test procedure documentation. Coordinate test objectives and execute testing across agile development teams. Conduct system‑level testing in...

Description: You will be the Systems Engineer Integration and Test for the Architecture, Design, Integration & Test (ADIT) team which is responsible for... What You Will Be Doing As the Systems Engineer Integration and Test you will be responsible for technical test planning and execution, guiding test objectives, and collaborating across agile development teams. Your responsibilities will include: Generate test plan and test procedure documentation. Coordinate test objectives with stakeholders. Execute testing across agile development teams. Report test results and provide recommendations for improvement. What’s In It For You We are committed to supporting your work-life balance and overall well-being, offering flexible scheduling options. Learn more about Lockheed Martin’s comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the...

Description: This position is for a Mid-level Technician whose primary assignment will consist of engineering hardware fabrication support, troubleshooting, testing and laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25 pounds, pushing and pulling of electronic equipment on carts, and working on test stations. These responsibilities will include fabrication of harnesses, electronic/electrical chassis and subassembly panels, mechanical rack fabrication, and various modifications to mechanical racks and electronic test stations using development engineering drawings. Ability to visualize and build electronic racks with minimal defects and little to no supervision. Candidate must be capable of working independently and in a team environment and discussing technical issues with Build Lead. Demonstrated problem-solving and troubleshooting skills, with the ability to analyze technical issues and propose effective solutions....

Description: You will be the Aeronautical Engineering Sr Stf for the F‑35 Subsystem Design Team which is responsible for delivering innovative subsystem solutions for the F‑35 fleet. What You Will Be Doing As the Aeronautical Engineering Sr Stf you will be responsible for leading the design and integration of aircraft subsystems, ensuring robust solutions across mechanical, electrical, and multi‑disciplinary domains. “Your responsibilities will include:” Lead integration and design synthesis across multiple design teams. Perform electrical design, including system‑interface integration, wire harness, fiber‑optic harness, and coaxial cable definition. Create and maintain 3‑D CATIA models, assemblies, and related system‑requirement drawings. Conduct multi‑disciplinary system trade studies to optimize performance. Mentor early‑career engineers and champion One‑LM culture across cross‑functional teams. What’s In It For You We are committed to...

Description: You will be the RCS Model Design Engineer for the team which is responsible for designing and integrating Low Observable (LO) components and test articles, including full‑scale models. What You Will Be Doing As the RCS Model Design Engineer you will be responsible for delivering engineering documentation, CAD drawings, and supporting integration and testing efforts across multiple disciplines. “Your responsibilities will include:” Assist the team in the design, development, and testing of RCS materials, components, and full‑scale models for program objectives and RF testing. Use CATIA to develop and revise drawings, models, assemblies, and installation engineering CAD files. Support team members with design and manufacturing knowledge and experience. Complete design modifications to improve product quality or facilitate manufacturing operations. Plan integration efforts for components and test articles. What’s In It For You We...

Description: You will be the Systems Engineering Manager for the System Integration Lab (SIL) Development Hardware/Photonics team which is responsible for... What You Will Be Doing As the Manager, Lab Hardware Design Team you will be responsible for leading and executing hardware development for SIL‑based test systems. Your responsibilities will include: Leading a Fort  Worth SIL Development Hardware/Photonics team, directing hardware design, checkout, delivery, installation, and integration of lab test equipment. Managing multiple programs across multiple Lines of Business—including direct/capital‑funded F‑35 and ADP projects, business‑development initiatives, and R&D efforts. Overseeing staffing, training, and technical expertise to translate customer requirements into mechanical, electrical, and optical designs. Coordinating cost, schedule, and resource planning with LOB Project Leads, CAMs, and Managers, while communicating effectively with LM...

Description: You will be the RCS Model Design Engineer for the team which is responsible for designing and integrating Low Observable (LO) components and test articles, including full‑scale models. What You Will Be Doing As the RCS Model Design Engineer you will be responsible for delivering engineering documentation, CAD drawings, and supporting integration and testing efforts across multiple disciplines. “Your responsibilities will include:” Assist the team in the design, development, and testing of RCS materials, components, and full‑scale models for program objectives and RF testing. Use CATIA to develop and revise drawings, models, assemblies, and installation engineering CAD files. Support team members with design and manufacturing knowledge and experience. Complete design modifications to improve product quality or facilitate manufacturing operations. Plan integration efforts for components and test articles. What’s In It For You We...

Description: You will be the RF Engineering Manager for the ADP Mission Systems which is responsible for delivering cutting‑edge aircraft mission capabilities. What You Will Be Doing As the RF Engineering Manager you will be responsible for leading a high‑performing team of engineers in the design, test, and integration of ADP systems and subsystems, while fostering technical excellence and personal growth. Your responsibilities will include: Manage complex technical projects, applying aircraft‑level test techniques and robust risk‑management practices. Interpret customer requirements, create system and equipment specifications, and develop statements of work, implementation plans, test, integration, and closure activities. Coordinate with suppliers, internal groups, and customers to produce effective proposals and align stakeholder expectations. Allocate work assignments based on team members’ skills and career objectives, providing mentorship and...

Description: You will be the RF Engineering Associate Manager for the ADP Mission Systems which is responsible for delivering cutting‑edge aircraft mission capabilities. What You Will Be Doing As the RF Engineering Associate Manager you will be responsible for leading a high‑performing team of engineers in the design, test, and integration of ADP systems and subsystems, while fostering technical excellence and personal growth. Your responsibilities will include: Manage complex technical projects, applying aircraft‑level test techniques and robust risk‑management practices. Interpret customer requirements, create system and equipment specifications, and develop statements of work, implementation plans, test, integration, and closure activities. Coordinate with suppliers, internal groups, and customers to produce effective proposals and align stakeholder expectations. Allocate work assignments based on team members’ skills and career objectives,...

Description: You will be the Infrared Low Observables Engineer for the Low Observables team (Signature Management & Survivability) which is responsible for advancing infrared susceptibility and low‑observable technology across the entire aircraft survivability lifecycle. What You Will Be Doing As the Infrared Low Observables Engineer you will be responsible for leading technical efforts that shape the next generation of stealth‑focused infrared solutions. "Your responsibilities will include:" Perform and communicate vehicle signature predictions using Unix‑based codes, EO/IR ray‑trace, Monte Carlo, CEM, MoM, and geometric/physical optics. Conduct laboratory measurements of material coupons to determine optical, electrical, and environmental properties. Design, prototype, and test advanced infrared materials, coatings, and hardware components. Develop and maintain signature prediction tools in C++, Java, and Fortran, creating algorithms for novel...

Description: Electrical Engineer - Systems Integration/Test - Level 4 We are Lockheed Martin The Electronic Hardware Design (EHD) team develops flightworthy safety critical electronic hardware, embedded software, FPGAs, and test equipment for LM Aero aircraft programs and related needs. We are a co-located team of electrical, mechanical, software, test, and project management engineers under one manager. These EHD disciplines develop requirements, produce detailed designs, qualify, document, develop test equipment for, and establish production build to print suppliers for the products it develops. Responsible for the development and verification of flightworthy safety critical electronic circuit cards, FPGAs, and related test equipment. Will work closely with embedded software engineers, mechanical engineers, specialty engineering, and test engineers integrating the software, hardware, and test stations. May also develop automated test capabilities enabling hardware and...

Description: You will be the Electro-Optical Engineer for the Electro Optical Infrared (EOIR) Team which is responsible for... What You Will Be Doing As the Electro-Optical Engineer you will be responsible for leading the integration of EOIR solutions within advanced aircraft programs. Your responsibilities will include: Define, review, and document engineering requirements for EOIR systems. Coordinate with principal engineers, stakeholders, and customers to align specifications. Plan, develop, integrate, and validate optical, infrared, and laser systems on fighter aircraft. Prepare and deliver technical briefings to customers and senior leadership. Support travel to national and international program sites for testing and meetings. What’s In It For You We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about Lockheed Martin’s comprehensive benefits package here....

Description: You will be the Systems Engineer Staff for the Mission Systems team which is responsible for... What You Will Be Doing As the Systems Engineer Staff you will be responsible for managing electronic hardware for Mission System products and applying systems‑engineering principles across the product lifecycle. "Your responsibilities will include:" Manage electronic hardware development and integration for mission‑critical products. Apply systems‑engineering methods to subsystem design, testing, and verification. Collaborate with product development, electrical, and software teams to ensure cohesive solutions. Develop and execute test plans that validate hardware and software interfaces. Identify technical risks, drive corrective actions, and maintain documentation for compliance. What’s In It For You We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about...

Description: You will be the Mechanical Engineer - Level 4 for the Electronic Hardware Design (EHD) team which is responsible for developing flight‑worthy, safety‑critical electronic hardware. What You Will Be Doing As the Mechanical Engineer - Level 3 you will be responsible for delivering robust mechanical solutions that enable the EHD team’s mission‑critical hardware to perform flawlessly in aerospace environments. Your responsibilities will include: Design and analyze mechanical components for flight‑critical electronic hardware. Collaborate with electrical engineers to integrate mechanical and electronic subsystems. Conduct tolerance analysis, stress testing, and validation of hardware assemblies. Generate detailed CAD models and engineering drawings that meet aerospace standards. Support prototype build, test, and troubleshooting activities. What’s In It For You We are committed to supporting your work‑life balance and overall...

Description: The Electrical Capability - Project Engineer working in supply chain is the technical authority for evaluating, selecting, and developing external electrical component suppliers that produce Circuit Card Assemblies (CCAs), Printed Wire Boards (PWBs), and cable/wire harnesses. The role blends deep electrical manufacturing expertise with strong business acumen to translate capability data into strategic sourcing decisions that drive cost reduction, risk mitigation, and program competitiveness. The engineer partners closely with Supply Chain, Strategic Sourcing, Supplier Quality, and Operations to assess supplier capabilities, resolve technical issues, and ensure that suppliers meet quality, delivery, and performance requirements throughout the product lifecycle. ________________________________________ Key Responsibilities Supplier Technical Evaluation & Selection o Lead technical assessments of electrical suppliers, covering: o CCA assembly processes (SMT,...

Description: You will be the Structures Design Engineer - F35/F22/F16 for the F-35 Control Surface and Edge (CS&E) engineering team which is responsible for... What You Will Be Doing As the Structures Design Engineer - F35/F22/F16 you will be responsible for delivering high‑performance structural solutions for advanced fighter aircraft. Your responsibilities will include: Perform and review airframe structural configuration layouts and detail designs, including structural layouts, preliminary sizing, joint layouts, and part design using CATIA v5 with metallic and composite materials. Execute and review changes to CATIA models, drawings, and supporting documentation to ensure accuracy and compliance. Coordinate integration for structures and systems design, collaborating across disciplines. Design and BTP release of external tanks, pylons, and pods for the F‑35, F‑22, and F‑16 platforms. What’s In It For You We are committed to supporting your...

Description: You will be the Electrical Engineer (Weapons Integration) for the Weapons Integration Team which is responsible for integrating and validating advanced weapon systems on aircraft platforms. What You Will Be Doing As the Electrical Engineer (Weapons Integration) you will be responsible for driving the design, test, and certification of weapon system integrations on the F‑35. You will collaborate with cross‑functional engineers, develop technical documentation, and assess safety impacts of design changes. Your responsibilities will include: Develop and execute system design, test plans, and certification strategies for weapon integrations. Perform integration, test, and evaluation activities, capturing results and recommending solutions. Maintain and update technical documentation, including design files, test reports, and certification records. Identify, analyze, and mitigate safety risks associated with weapon system modifications....

Description: The selected candidate will provide technical support to cross functional teams driving the digital transformation of our aerospace business. In addition to strong CAD/CAM & PLM expertise, the role now emphasizes generative AI, prompt engineering, and AI enabled workflow automation. Candidates with traditional aerospace/mechanical backgrounds are preferred, but a Computer Science degree combined with solid mechanical/engineering experience will also be considered. Key Responsibilities • Design, prototype, and integrate generative AI tools (e.g., design assistants, topology optimization engines) into existing CAD/CAM workflows. • Create and maintain prompt engineering libraries and best practice guides for AI assisted modeling, simulation, and documentation. • Evaluate AI model performance based on accuracy and latency. • Provide day to day technical assistance to aerospace design teams, ensuring AI augmented solutions improve productivity and quality. • Author...

Description: The selected candidate will serve as the CAD (Computer Aided Design) and PLM (Product Lifecycle Management) training lead for all aeronautical sites, operating within the CAD/CAM & PLM organization. In this role, the incumbent will oversee the training process and requirements for both CAD tools (CATIA V5, 3DX, and NX) and PLM systems (PDM, AeroSource, Enovia, CADDatanet, PLM4ADP, and Xcelerator) across cross functional teams. A deep, hands on knowledge of CATIA V5, 3DX, NX, Xcelerator, and other aerospace PLM tools is essential. The primary responsibility is to deliver comprehensive training on CATIA V5, 3DX, Xcelerator, and related PLM platforms to functional groups that include design, analysis, manufacturing, tooling, sustainment, and specialty engineering. In addition, the candidate will apply aerospace design expertise to develop best practice CAD/CAM and PLM modeling processes, coordinating with the Aero IT organization to create and deploy effective...

Description: This position is for a Mid-level Technician whose primary assignment will consist of engineering hardware fabrication support, troubleshooting, testing and laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25 pounds, pushing and pulling of electronic equipment on carts, and working on test stations. These responsibilities will include fabrication of harnesses, electronic/electrical chassis and subassembly panels, mechanical rack fabrication, and various modifications to mechanical racks and electronic test stations using development engineering drawings. Ability to visualize and build electronic racks with minimal defects and little to no supervision. Candidate must be capable of working independently and in a team environment and discussing technical issues with Build Lead. Demonstrated problem-solving and troubleshooting skills, with the ability to analyze technical issues and propose effective solutions. Ability...