26 jobs found in Fort Worth

Description: You will be the Structures Design Engineer - F35/F22/F16 for the F-35 Control Surface and Edge (CS&E) engineering team which is responsible for... What You Will Be Doing As the Structures Design Engineer - F35/F22/F16 you will be responsible for delivering high‑performance structural solutions for advanced fighter aircraft. Your responsibilities will include: Perform and review airframe structural configuration layouts and detail designs, including structural layouts, preliminary sizing, joint layouts, and part design using CATIA v5 with metallic and composite materials. Execute and review changes to CATIA models, drawings, and supporting documentation to ensure accuracy and compliance. Coordinate integration for structures and systems design, collaborating across disciplines. Design and BTP release of external tanks, pylons, and pods for the F‑35, F‑22, and F‑16 platforms. What’s In It For You We are committed to supporting your...

Description: Electromagnetics and Systems Engineering work to include but not limited to leading requirements development, tracking and verification of a system. A strong background in Electromagnetic Environmental Effects (E3) including Radio Frequency (RF) systems, RF Cosite analysis, antenna systems and measurement, RF/Fiber optic cabling, antenna radome performance, system intra-operability, aircraft power systems, electromagnetic radiation hazard (EMRADHAZ) analysis, electrical wiring design and avionics hardware is a must. Leading key working groups and system trade studies. Lead the integration of developmental and deployable systems onto various air platforms. E3 integration design of flight test modifications as required to ensure proper implementation. Basic Qualifications: • STEM degree from an accredited college in a related discipline, Electrical Engineering or Physics • 20 years of industry experience in fields of interest • Design concepts of EMI/EMC knowledge as...

Description: You will be the Electrical Engineer (Weapons Integration) for the Weapons Integration Team which is responsible for integrating and validating advanced weapon systems on aircraft platforms. What You Will Be Doing As the Electrical Engineer (Weapons Integration) you will be responsible for driving the design, test, and certification of weapon system integrations on the F‑35. You will collaborate with cross‑functional engineers, develop technical documentation, and assess safety impacts of design changes. Your responsibilities will include: Develop and execute system design, test plans, and certification strategies for weapon integrations. Perform integration, test, and evaluation activities, capturing results and recommending solutions. Maintain and update technical documentation, including design files, test reports, and certification records. Identify, analyze, and mitigate safety risks associated with weapon system modifications....

Description: The selected candidate will provide technical support to cross functional teams driving the digital transformation of our aerospace business. In addition to strong CAD/CAM & PLM expertise, the role now emphasizes generative AI, prompt engineering, and AI enabled workflow automation. Candidates with traditional aerospace/mechanical backgrounds are preferred, but a Computer Science degree combined with solid mechanical/engineering experience will also be considered. Key Responsibilities • Design, prototype, and integrate generative AI tools (e.g., design assistants, topology optimization engines) into existing CAD/CAM workflows. • Create and maintain prompt engineering libraries and best practice guides for AI assisted modeling, simulation, and documentation. • Evaluate AI model performance based on accuracy and latency. • Provide day to day technical assistance to aerospace design teams, ensuring AI augmented solutions improve productivity and quality. • Author...

Description: The selected candidate will serve as the CAD (Computer Aided Design) and PLM (Product Lifecycle Management) training lead for all aeronautical sites, operating within the CAD/CAM & PLM organization. In this role, the incumbent will oversee the training process and requirements for both CAD tools (CATIA V5, 3DX, and NX) and PLM systems (PDM, AeroSource, Enovia, CADDatanet, PLM4ADP, and Xcelerator) across cross functional teams. A deep, hands on knowledge of CATIA V5, 3DX, NX, Xcelerator, and other aerospace PLM tools is essential. The primary responsibility is to deliver comprehensive training on CATIA V5, 3DX, Xcelerator, and related PLM platforms to functional groups that include design, analysis, manufacturing, tooling, sustainment, and specialty engineering. In addition, the candidate will apply aerospace design expertise to develop best practice CAD/CAM and PLM modeling processes, coordinating with the Aero IT organization to create and deploy effective...

Description: This position is for a Mid-level Technician whose primary assignment will consist of engineering hardware fabrication support, troubleshooting, testing and laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25 pounds, pushing and pulling of electronic equipment on carts, and working on test stations. These responsibilities will include fabrication of harnesses, electronic/electrical chassis and subassembly panels, mechanical rack fabrication, and various modifications to mechanical racks and electronic test stations using development engineering drawings. Ability to visualize and build electronic racks with minimal defects and little to no supervision. Candidate must be capable of working independently and in a team environment and discussing technical issues with Build Lead. Demonstrated problem-solving and troubleshooting skills, with the ability to analyze technical issues and propose effective solutions. Ability...

Description: What if your work could help prevent conflict, by making our capabilities so advanced, no one dares to challenge them? We are the Aero Artificial Intelligence team at Lockheed Martin Aeronautics, building and deploying trusted AI that strengthens deterrence, improves engineering rigor, and advances global security. This role is for a senior, hands-on AI professional who operates with high independence and technical ownership. You will design and deliver AI systems that improve how complex aerospace systems are engineered, integrated, tested, and sustained. Understanding aerospace systems engineering is valuable, but deep AI expertise and autonomous execution are paramount. Job Description The Senior Applied AI Engineer - Engineering Systems is responsible for independently framing, architecting, and delivering AI-enabled solutions that improve systems engineering effectiveness, safety, and efficiency across the engineering lifecycle. This role operates as a...

Description: We are Lockheed Martin This position is with Advanced Development Program (ADP)—the historic Skunk Works in the Dallas/Fort Worth area. We are seeking world class talent to join our 75 year tradition of creating advanced aircraft. What You Will Be Doing The selected candidate will serve as a Systems Engineer on the Ground Systems Hardware Team. In a fast paced environment, the engineer will support both the physical build up and hardware design by integrating Commercial Off The Shelf (COTS) components into the system architecture using CATIA and the designated Product Lifecycle Management (PLM) tool. What’s In It For You: 3 day weekends every weekend! From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin’s comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and...

Description: We are Lockheed Martin This position is with Advanced Development Program (ADP), known as the historic Skunk Works located in Dallas/Fort Worth. We are looking for world-class talent for this position to join the 75+ year tradition of creating advanced aircraft. The candidate will join an ADP effort as a Systems Engineer Architect on the Ground Systems Hardware Team. What You Will Be Doing The candidate must work independently in a fast paced environment and will be responsible for supporting the team with hardware build up, configuration management, and product releases. Proficiency in interpreting hardware and networking architecture diagrams is essential. In addition, the role includes designing and reviewing hardware drawings for Commercial-off-the-Shelf (COTS) components as they are integrated into the system architecture. What’s In It For You: 3 day weekends every weekend! From onsite to remote, we offer flexible work schedules to comprehensive...

Description: You will be the System Engineer, Integration Lab Stf for the Skunk Works (Advanced Development Program) team which is responsible for turning visionary aircraft concepts into operational reality. What You Will Be Doing As the System Engineer, Integration Lab Stf you will be responsible for delivering hardware‑centric solutions that enable rapid system verification and testing. Your responsibilities will include: Perform system integration, test, and troubleshooting of hardware/software configurations. Design and integrate hardware equipment for the Systems Integration Labs (SIL). Establish Hardware‑In‑The‑Loop (HWIL) and closed‑loop development/testing in the SIL. Interface with software developers, systems engineers, and customers to support verification activities. Maintain design documentation and adhere to configuration‑management requirements. What’s In It For You We are committed to supporting your work‑life balance...

Description: This position is for a Mid-level Technician whose primary assignment will consist of engineering hardware fabrication support, troubleshooting, testing and laboratory operations responsibility, particularly in the area of military fiber optics. Performing Fiber Optic terminations and Fiber Optic repair is the primary job role. Candidate must be able to travel and be able to work on or around military aircraft. The ability to learn and operate fiber optic termination equipment and fiber optic test equipment. Some climbing on ladders may be required as well as lifting up to 25 pounds, pushing and pulling electronic equipment on carts, and working on test stations. These responsibilities will include fabrication of fiber optic and copper wire harnesses, electronic/electrical chassis and subassembly panels, mechanical rack fabrication, and various modifications to mechanical racks and electronic test stations using development engineering drawings. Ability to visualize...

Description: You will be the Systems Engineer Sr. Integration and Test for the Architecture, Design, Integration & Test (ADIT) team within the Systems Integration & Test (SI&T) which is responsible for … What You Will Be Doing As the Systems Engineer Sr. Integration and Test you will be responsible for leading system‑level software testing initiatives, crafting test strategies, and ensuring integration quality across complex platforms. "Your responsibilities will include:" Develop and execute comprehensive test plans and procedures for system‑level software. Analyze test data, identify defects, and drive corrective actions. Collaborate with architects, designers, and developers to validate integration requirements. Maintain test environments and tools to support continuous testing. Provide clear reporting and recommendations to stakeholders on test outcomes. What’s In It For You "We are committed to supporting your work‑life...

Description: You will be the Systems Engineer Sr. Integration and Test for the Architecture, Design, Integration & Test (ADIT) team within the Systems Integration & Test (SI&T) which is responsible for … What You Will Be Doing As the Systems Engineer Sr. Integration and Test you will be responsible for leading system‑level software testing initiatives, crafting test strategies, and ensuring integration quality across complex platforms. "Your responsibilities will include:" Develop and execute comprehensive test plans and procedures for system‑level software. Analyze test data, identify defects, and drive corrective actions. Collaborate with architects, designers, and developers to validate integration requirements. Maintain test environments and tools to support continuous testing. Provide clear reporting and recommendations to stakeholders on test outcomes. What’s In It For You "We are committed to supporting your work‑life...

Description: This position is for a Mid-level Technician whose primary assignment will consist of engineering hardware fabrication support, troubleshooting, testing and laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25 pounds, pushing and pulling of electronic equipment on carts, and working on test stations. These responsibilities will include fabrication of harnesses, electronic/electrical chassis and subassembly panels, mechanical rack fabrication, and various modifications to mechanical racks and electronic test stations using development engineering drawings. Ability to visualize and build electronic racks with minimal defects and little to no supervision. Candidate must be capable of working independently and in a team environment and discussing technical issues with Build Lead. Demonstrated problem-solving and troubleshooting skills, with the ability to analyze technical issues and propose effective solutions....

Description: You will be the Infrared Low Observables Engineer for the Low Observables team (Signature Management & Survivability) which is responsible for advancing infrared signature reduction and low observable technologies. What You Will Be Doing As the Infrared Low Observables Engineer you will be responsible for driving the end‑to‑end maturation of infrared susceptibility and low observable technology from concept through production. Your responsibilities will include: Performing and communicating vehicle signature predictions using Unix‑based codes, EO/IR raytrace, Monte Carlo, and CEM tools. Designing, prototyping, and testing advanced infrared materials, coatings, and hardware components. Conducting laboratory and flight measurements of material and vehicle signatures, and reporting results. Developing and maintaining signature prediction algorithms in C++, Java, and Fortran. Leading multidisciplinary design teams and representing the program in...

Description: You will be the Low Observables RCS Engineer for the Signature Integration Team which is responsible for advancing low‑observable technology across the aircraft survivability portfolio. What You Will Be Doing As the Low Observables RCS Engineer you will be responsible for leading the end‑to‑end maturation of low observable technologies from concept through prototype testing and customer engagement. Your responsibilities will include: Perform and communicate vehicle signature predictions using Unix‑based codes and tools. Conduct laboratory measurements of material coupons and analyze physical, electrical, and environmental properties. Lead research, design, and testing of advanced electromagnetic metamaterials. Develop, test, and maintain signature prediction tools using Python, C++, C#, Java, and Fortran. Produce technical reports and briefings, and engage with customers and government forums. What’s In It For You We are...

Description: You will be the Software Engineer, Modeling & Simulation for the Simulation & Systems Labs (SSL) which is responsible for... What You Will Be Doing As the Software Engineer, Modeling & Simulation you will be responsible for integration and troubleshooting of Shared Simulation Software (SSS) products in hardware‑in‑the‑loop and man‑in‑the‑loop lab environments, driving development and deployment of real‑time simulation capabilities. Your responsibilities will include: Design, develop, and integrate software for distributed, real‑time simulation systems. Execute integration and testing of SSS software across hardware‑in‑the‑loop and man‑in‑the‑loop labs. Apply simulation software engineering principles and technical concepts to reuse existing software and support digital transformation. Collaborate within an Agile, DevSecOps team to deliver high‑quality solutions that meet evolving customer needs. What’s In It For You We...

Description: You will be the Systems Engineer Sr for the for the Architecture, Design, Integration & Test (ADIT) team within the Systems Integration & Test (SI&T). Our team is responsible for systems level software testing. What You Will Be Doing As the Systems Engineer for the for the Architecture, Design, Integration & Test (ADIT) team you will perform technical test planning and execution. Responsibilities will include: • Generation of test plan and test procedure documentation • Coordination of test objectives • Execution across agile development teams. The 5th Gen Platforms SI&T team performs mission system capability integration and maturation, verification and validation testing and regression testing for F-35. Testing is generally at the system level and performed in hardware in the loop venues as well as software development labs executing both manual and automated testing. Integration and test will sometimes require candidates to work...

Description: You will be the Systems Engineer Integration and Test for the Architecture, Design, Integration & Test (ADIT) team which is responsible for... What You Will Be Doing As the Systems Engineer Integration and Test you will be responsible for technical test planning and execution, guiding test objectives, and collaborating across agile development teams. Your responsibilities will include: Generate test plan and test procedure documentation. Coordinate test objectives with stakeholders. Execute testing across agile development teams. Report test results and provide recommendations for improvement. What’s In It For You We are committed to supporting your work-life balance and overall well-being, offering flexible scheduling options. Learn more about Lockheed Martin’s comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the...

Description: You will be the Harness Design Engineer for the Integrated Fighter Group (IFG) which is responsible for developing advanced aircraft harness and interconnect solutions. What You Will Be Doing As the Harness Design Engineer you will be responsible for delivering reliable electrical system integration, providing engineering support to production, and creating detailed wiring documentation. "Your responsibilities will include:" Integrate electrical systems and subsystems, overseeing design, coordination, and supplier management. Provide direct liaison engineering support to Production and Supply Chain, including MRB activities. Review and disposition engineering actions, SPARs, and QARs. Create wire schematics and diagrams documenting the wiring architecture. Develop harness assembly drawings and build‑to‑packages for detailed parts and assemblies. What’s In It For You We are committed to supporting your work‑life balance and...