17 systems engineer jobs found in Grand Prairie

Description: You will be the Integration, Test, and Evaluation Engineer for our team, responsible for leading the integration, testing, and evaluation of complex systems. Our team is responsible for ensuring that integrated hardware meets physical, functional, and performance objectives. What You Will Be Doing As the Integration, Test, and Evaluation Engineer, you will be responsible for generating test procedures and plans, preparing test readiness review packages, integrating a development effort, and executing qualification testing. You will also write qualification test reports and support subcomponent and subassembly integration, as well as the build of subassembly hardware and test equipment. Your responsibilities will include: • Generating test procedures and plans • Preparing test readiness review packages • Executing qualification testing • Writing qualification test reports • Supporting subcomponent and subassembly integration • Supporting the build of subassembly...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. You will be the RF Seeker Integration Lead at Lockheed Martin Missiles & Fire Control, steering the end to end integration of the RF seeker into a major franchise program.  Your team will build and test three RF seekers, develop HWIL/Sensor HWIL test strategies, and validate hardware software integration across multiple disciplines, culminating in attitude control motor (ACM) compatibility testing at White Sands Missile Range. What You Will Be Doing As the Seeker Integration Lead you will own the hardware and software effort for the remainder of the RF Seeker Demo Program. You will design and...

Description: Lockheed Martin Missiles and Fire in Grand Prairie, TX is seeking an experienced Integration, Test, and Evaluation (IT&E) Lead Engineer to support an advanced program Ship Systems Integration and Test. The successful candidate would lead the ship systems team in test planning, hardware management, coordination with suppliers and other Lockheed Martin sites, and hazard analysis development. What You Will Be Doing As the Ship Systems Integration, Test, and Evaluation (IT&E) Engineer, you will support subsystem integration and testing, coordinating with the assigned ship point of contact to prepare power, command and control interfaces for the launch system used for future flight testing. The candidate will support the development of procedures for dry-run and formal functional testing using automated test equipment prior to live fire tests. The candidate will communicate technical status and issues internally to program and functional leadership, as well...

Description: Lockheed Martin Missiles and Fire in Grand Prairie, TX is seeking an experienced Integration, Test, and Evaluation (IT&E) Deputy Lead Engineer to work closely within the Advanced Programs Line of Business with our small, high-performing team and serve as a liaison to the program’s many test sites. What You Will Be Doing In this role you will lead on-site testing, support test planning, and provide hands-on hardware expertise to meet critical program milestones, while translating technical requirements into clear communication for site teams and senior leadership. The ideal candidate blends strong technical acumen with proven leadership skills, enabling effective collaboration, mentorship, and successful delivery of shared program goals. Key Duties: • Develops, prepares, and executes comprehensive test plans, procedures and schedules supporting integration and testing at several sites. • Lead cross-functional teams, suppliers, and cross-site members (very...

Description: Lockheed Martin Missiles and Fire control is seeking an Electrical Integration Engineer who will be supporting hardware and software integration for the PAC-3 Missile. The candidate will be involved in the verification and validation for new test sets as well as actively involved in missile testing throughout the life of the product. The candidate must have basic knowledge of electrical engineering in the areas of digital, analog, radio frequency circuit designs or electronic components. What You Will Be Doing • Support PAC-3 Missile Production and Sustainment activities relative to the processing, testing and troubleshooting of the PAC-3 missiles, including the dispositioning of MRB activity in the hardware non-conformance system • Writing and executing test plans and writing a test report • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide...

Description: Lockheed Martin Missiles and Fire control is seeking an Electrical Integration Engineer who will be supporting the Failure Analysis team for the PAC-3 Missile. The candidate will be involved in finding root cause and corrective action for systemic problems on the PAC-3 Program. The candidate must have knowledge of electrical engineering in the areas of digital, analog, radio frequency circuit designs or electronic components. What You Will Be Doing • Support PAC-3 Missile Sustainment activities relative to the processing, testing and troubleshooting of the PAC-3 missiles, including the dispositioning of MRB activity in the hardware and automated test equipment non-conformance systems • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide engineering evaluations of redesigns or upgrades to the existing missile Why Join Us We are committed to supporting...

Description: Lockheed Martin Missiles and Fire control is seeking an early career Electrical Integration Engineer who will be supporting hardware and software integration for the PAC-3 Missile. The candidate will be involved in the verification and validation for new test sets as well as actively involved in missile testing throughout the life of the product. The candidate must have basic knowledge of electrical engineering in the areas of digital, analog, radio frequency circuit designs or electronic components. What You Will Be Doing Candidate will participate in the following activities: • Support PAC-3 Missile Production and Sustainment activities relative to the processing, testing and troubleshooting of the PAC-3 missiles, including the dispositioning of MRB activity in the QNOTE non-conformance system • Writing and executing test plans and writing a test report • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have...

Description: You will be the HWIL FPGA Engineer for the RF Sensors Product Center Hardware‑in‑the‑Loop team. Our team is responsible for delivering cutting‑edge HWIL capabilities for RF sensor systems. What You Will Be Doing As the HWIL FPGA Engineer you will be responsible for designing, developing, and implementing radio‑frequency (RF) signal modulation capabilities in FPGAs. Your responsibilities will include, but are not limited to: Define FPGA architecture to meet RF signal modulation requirements. Develop VHDL firmware for high‑performance RF signal generation and processing. Create and integrate interfaces between the FPGA and ancillary HWIL hardware. Conduct integration, test, verification, and validation of multiple subsystems. Collaborate with cross‑functional engineers to ensure compliance with system specifications. Why Join Us The ideal candidate is a collaborative, forward‑thinking engineer who thrives in a mission‑driven...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for the Next Gen Short Range Interceptor (NGSRI) program. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for the Guidance Electronic Components Assembly (GECA). • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for the Next Gen Short Range Interceptor (NGSRI) program. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for the Guidance Electronic Components Assembly (GECA). • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and...

Description: You will be the Circuit Card Design Engineer for the Missile & Fire Control (MFC) – Next Gen Short Range Interceptor (NGSRI) team. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems running reliably in harsh, radiation rich environments. What You Will Be Doing As the Circuit Card Design Engineer you will lead the architecture, schematic capture, and layout of multiple circuit card assemblies for the NGSRI Guidance Electronic Components Assembly (GECA). You will partner with cross functional engineers to drive designs through the Design Assurance process, from concept through procurement and test. Your responsibilities will include: • Developing and refining system, performance, interface, and environmental requirements for GECA circuit cards. • Capturing schematics and coordinating with EPCAD for layout and signal routing optimization. • Conducting trade studies to evaluate design options and...

Description: You will be the FPGA Design Engineer for our team, responsible for designing, developing, and implementing solutions using Field-Programmable Gate Arrays (FPGAs). Our team is responsible for creating innovative systems that drive business growth and customer satisfaction. What You Will Be Doing As the FPGA Design Engineer, you will be responsible for designing and developing FPGA-based systems. Your responsibilities will include: -Lead the development of a complex FPGA-based architecture, including specification, design, verification, and implementation -Develop trade studies to select an FPGA solution optimized for device utilization, power and thermal requirements -Collaborate with cross-functional teams, including software, hardware, and systems engineering to develop an optimal architecture and develop FPGA requirements -Provide technical leadership and guidance to junior engineers -Lead the team through the Design Architecture development process Why Join...

Description: You will be the FPGA Design Engineer for our team, responsible for designing, developing, and implementing solutions using Field-Programmable Gate Arrays (FPGAs). Our team is responsible for creating innovative systems that drive business growth and customer satisfaction. What You Will Be Doing As the FPGA Design Engineer, you will be responsible for designing and developing FPGA-based systems. Your responsibilities will include: -Lead the development of a complex FPGA-based architecture, including specification, design, verification, and implementation -Develop trade studies to select an FPGA solution optimized for device utilization, power and thermal requirements -Collaborate with cross-functional teams, including software, hardware, and systems engineering to develop an optimal architecture and develop FPGA requirements -Provide technical leadership and guidance to junior engineers -Lead the team through the Design Architecture development process Why Join...

Description: You will be the Electrical Engineer for the PAC-3 launcher program at Lockheed Martin Missiles and Fire Control. Our team is responsible for designing, developing, and manufacturing precision engagement aerospace and defense systems for the U.S. and allied militaries, and we're looking for an experienced Electrical Engineer to join our team. What You Will Be Doing As the Electrical Engineer, you will be the primary technical contact supporting PAC-3 Launcher and Missile hardware obsolescence contracts. Your responsibilities will include: • Lead Component Obsolescence Team serving as the primary technical point of contact for PAC-3 electronics hardware for Launcher and Missile. • Help direct build-up of subassemblies after component LTB; LM and supplier • Monitor production completion of LM “make” assemblies when consuming Obsolete components • Awareness/tracking of configuration updates, system compatibility across missile, launcher, and sensor platforms •...

Description: You will be the HWIL COE IT&E Engineer responsible for supporting the design, development, and implementation of real-time, closed-loop Hardware-in-the-Loop (HWIL) capabilities. Our team is focused on delivering high-quality electrical systems, and you will play a key role in ensuring the successful integration and testing of these systems. What You Will Be Doing As the HWIL COE IT&E Engineer, you will be responsible for: • Designing, developing, and implementing electrical systems, including cable design, PCB layout, and integration of components • Troubleshooting hardware failures using lab equipment and electrical design tools such as SPICE, Altium, or similar software • Supporting the integration team in debugging electrical issues, including connectors, timing, Electromagnetic Interference (EMI), and overall design reviews • Integrating stimulation equipment into the HWIL facility and testing electrical systems and subsystems • Collaborating with...

Description: You will be a Circuit Card Designer for the Lockheed Martin Missiles and Fire Control (MFC) team. Our team is responsible for developing cutting-edge technologies for small form factor missiles, including processor boards and interface board designs. What You Will Be Doing As a Circuit Card Designer, you will be responsible for designing and developing circuit card designs for cutting edge systems. You will work closely with electronic packaging engineers and systems engineers to ensure seamless integration. Your responsibilities will include: • Designing and developing circuit card designs for cutting edge systems • Collaborating with electronic packaging engineers and systems engineers • Creating bread board and brass board designs to fit the desired form factor • Working in a lab environment to test, evaluate, and integrate board designs • Utilizing schematic capture and board layout tools Why Join Us We're looking for a skilled and collaborative Circuit...

Description: You will be a Lead Circuit Card Designer for the Lockheed Martin Missiles and Fire Control (MFC) team. Our team is responsible for developing cutting-edge technologies for small form factor missiles, including processor boards and interface board designs. What You Will Be Doing As a Lead Circuit Card Designer, you will be responsible for leading design and development of circuit card designs for cutting edge systems. You will work closely with your team and electronic packaging engineers and systems engineers to ensure seamless integration. Your responsibilities will include: • Leading the design and development of circuit card designs for cutting edge systems • Collaborating with electronic packaging engineers and systems engineers • Leading design, build, and integration of bread board and brass board designs to fit the desired form factor • Working in a lab environment to test, evaluate, and integrate board designs • Utilizing schematic capture and board...