15 configuration management data management engineer jobs found in Orlando

Description: You will be the Electromechanical Design Engineer for the Common Command Flight Termination System (FTS) team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ESAF (Electronic Safe and Arm Fuze) packaging that will serve as the common ESAF backbone for every new FTS. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ESAF • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials,...

Description: Lockheed Martin Missiles and Fire in Orlando, FL is seeking an experienced Integration, Test, and Evaluation (IT&E) Engineer to support missile and sensor development programs. Our team is dedicated to delivering innovative solutions, and you will play a key role in supporting the test series leading up to flight testing. What You Will Be Doing The selected Integration, Test, and Evaluation (IT&E) Engineer will lead subsystem and system-level integration and testing, use of test equipment during missile processing, and preparation of test related documentation. The candidate will lead a team in the planning and execution of the development, qualification and integration test effort, to include subsystems and missile level activities. This role will also require the candidate to oversee the assembly and test of mockup missiles and live ordnance flight test missiles. The candidate will work under only general direction reporting to a program IT&E Lead....

Description: What You Will Be Doing You will be a Strategic Software, Staff with the ability to capture/derive requirements and perform CSCI/CSC/CSU decomposition, detailed design work, and bench level testing. Candidate will perform requirements capture through detailed design, implementation, and integration of a new System on a Chip (SoC) design for Block 1.1. Candidate will be responsible for supporting all data link software design including the following specialty capabilities: RF waveform implementation and incorporation of Simulink Coder into software, cryptographic algorithm development and debug, and low-speed messaging and communication with external peripherals. Prior experience with Microchip SoC’s, Xilinx SoC’s, UVM, and GitLab is preferred. As a Staff Software Engineer, your responsibilities will include but are not limited to: • Develop and maintain embedded software applications and/or desktop applications. • Tasks will involve requirement, design, code,...

Description: You will be the Electromechanical Design Engineer for the Missiles & Fire Control (MFC) Hardware Engineering team. Our team designs, develops and manufactures precision engagement aerospace and defense systems for the United States and allied partners, delivering innovative electronic packaging solutions, hands on prototypes, and production ready hardware. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for creating cutting edge electromechanical concepts and delivering production support across multiple defense programs while partnering with a diverse set of cross functional teammates. Your responsibilities will include: • Designing electromechanical systems and components such as circuit card assemblies, harnesses, electronic enclosures and sub assemblies. • Producing detailed mechanical layouts, 3 D models and engineering drawings, selecting appropriate materials, components and manufacturing processes. • Modeling...

Description: Lockheed Martin Missiles and Fire in Orlando, FL is seeking an experienced Integration, Test, and Evaluation (IT&E) Engineer to support missile and sensor development programs. Our team is dedicated to delivering innovative solutions, and you will play a key role in supporting the test series leading up to flight testing. What You Will Be Doing The selected Integration, Test, and Evaluation (IT&E) Engineer will lead subsystem and system-level integration and testing, use of test equipment during missile processing, and preparation of test related documentation. The candidate will lead a team in the planning and execution of the development, qualification and integration test effort, to include subsystems and missile level activities. This role will also require the candidate to oversee the assembly and test of mockup missiles and live ordnance flight test missiles. The candidate will work under only general direction reporting to a program IT&E Lead....

Description: You will be the Electromechanical Engineer for the Hardware Engineering team within Missiles & Fire Control (MFC). Our team delivers the high reliability electronic packaging, harnesses, and enclosures that power missile and radar systems for the United States and allied militaries. What You Will Be Doing As the ElectroMechanical Engineer you will own the end to end development and production of electromechanical hardware on one or more defense programs. You’ll lead cross functional teams, mentor junior engineers, and ensure every design meets strict size, weight, power, and environmental requirements. Your responsibilities will include: • Leading hardware development and production efforts, driving schedules, quality, and cost targets. • Designing CCA/PWB packages, harness assemblies, and electronic enclosures; creating detailed 3 D models, 2 D drawings, and layout documents in Windchill/CREO. • Selecting materials, components, and manufacturing processes...

Description: You will be the Electromechanical Design Engineer for the Ignition Safety device (ISD) for the PrSM team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ISD (Ignition Safety device) packaging that will serve as the common ISD backbone for PrSM. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ISD • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials, obtaining vendor...

Description: You will be the Senior ElectroMechanical Engineer on the Advanced Programs hardware engineering team within Lockheed Martin Missiles & Fire Control (MFC). Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries. You’ll work on cutting edge electronics packaging, hands on prototype builds, production support, and technical leadership that directly impact next generation missile and radar programs. What You Will Be Doing As the Senior ElectroMechanical Engineer you will act as a key technical contributor on one or more defense programs, guiding hardware from concept through low rate production and full rate manufacturing. You’ll lead cross functional teams, create detailed electromechanical models and drawings, define test criteria, and drive issue resolution while mentoring junior engineers and championing an inclusive, collaborative culture. Your responsibilities will include: • Lead...

Description: You will be the Electromechanical Design Engineer for the Common Command Flight Termination System (FTS) team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ISD (Ignition Safety device) packaging that will serve as the common ISD backbone for every new FTS. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ISD • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials,...

Description: You will be the FPGA Engineer for the Digital Logic Integration team. Our team delivers mission critical hardware and software that connects sensors, actuators and compute platforms across a range of defense programs, ensuring reliable, high performance operation from concept through fielding. What You Will Be Doing As the FPGA Engineer you will capture and translate system requirements into detailed FPGA architectures, drive simulation and verification, and integrate designs with board level hardware. You will work closely with hardware, software and test partners to validate the complete system and lead design assurance activities that keep the program on schedule and compliant with aerospace standards. Your responsibilities will include • Elicit, refine and document functional and performance requirements for FPGA designs. • Create detailed RTL (VHDL/Verilog/SystemVerilog) and accompanying constraints to meet timing, power and reliability goals. • Develop and...

Description: You will be the Circuit Design Engineer – Sniper Advanced Targeting Pod (ATP) for the Advanced Targeting Pod team. Our team delivers the high visibility Sniper pod that provides passive detection, high definition EO/IR imaging, laser designation, and two way video for air to air and air to surface missions. We design, develop, and sustain the circuit cards that keep the pod performing reliably in the most demanding combat environments. What You Will Be Doing As the Circuit Design Engineer, you will own the end to end lifecycle of ATP circuit cards—from schematic capture through fielded production—while supporting manpower planning, cost schedule management, and new business capture. Your responsibilities will include: • Creating detailed schematics and performing signal integrity, power, and RF simulations using Xilinx Vivado, Microsemi Libero, and other industry standard tools. • Driving hardware integration, qualification, and test campaigns to verify...

Description: You will be the Electromechanical Design Engineer for the Missiles & Fire Control (MFC) Carrier Card Assembly (CCA) team. Our team creates the mechanical electrical hardware that powers advanced missile systems and supports production line delivery for U.S. and allied defense programs. What You Will Be Doing As the Electromechanical Design Engineer you will develop innovative electromechanical concepts, generate production ready documentation, and provide hands on support throughout the build to field process. You’ll work independently when needed and collaborate closely with a wide range of specialists to keep designs on schedule and compliant. Your responsibilities will include: • Designing and detailing electromechanical systems and CCA components, including material, component, and process selection. • Creating 3 D layouts, 2 D drawings, and all required engineering deliverables in Windchill. • Coordinating with structural, thermal, configuration...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Command Launch Assembly (CLA) FPGA team within Missiles & Fire Control (MFC). Our team delivers the digital heart beat that powers the Next Generation Short Range Interceptor (NGSRI), turning system level performance and safety goals into reliable, production ready FPGA hardware for the United States and allied forces. What You Will Be Doing As the senior ASIC & FPGA designer you will own the full lifecycle of the CLA FPGA—from high level architecture through release ready documentation—while mentoring junior talent and partnering with a broad set of cross functional experts. Your responsibilities will include: • Defining FPGA architecture and drafting design specifications; writing clean RTL in VHDL/Verilog/SystemVerilog that satisfies performance, power, and reliability targets. • Developing synthesis, place and route, and timing closure strategies to guarantee deterministic operation on the...

Description: You will be the Senior Circuit Design Engineer for the Command Launch Assembly (CLA) Carrier Card Assembly (CCA) team within Missiles & Fire Control (MFC). Our team delivers the high performance electronic hardware that powers the Next Generation Short Range Interceptor (NGSRI) and other precision engagement systems for the United States and allied forces. What You Will Be Doing As the Senior Circuit Design Engineer you will own the end to end design of the CCA, translating system requirements into reliable, production ready circuit cards that power, communicate with, and integrate into the launcher’s subsystems. You will work hand in hand with mechanical, electrical, and systems engineers, perform verification and validation, and ensure every design meets rigorous power conditioning, signal integrity, and environmental standards. Your responsibilities will include: • Defining performance, power, and interface requirements for the CCA and documenting them in...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Programmable Logic Design team supporting the Next Generation Short Range Interceptor (NGSRI). Our team creates the digital heart beats—ASICs and FPGAs—that enable precision engagement aerospace and defense systems for the United States and allied forces. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will own the architecture, development, verification, and delivery of the Datalink FPGA that powers the NGSRI. You’ll translate system level performance, safety, and reliability goals into robust, production ready logic while mentoring junior talent and collaborating across disciplines. Your responsibilities will include: • Defining architecture and design specifications for programmable logic components; writing clean, well documented RTL in VHDL/Verilog/SystemVerilog. • Developing synthesis, place and route, and timing closure strategies to achieve deterministic operation on...