22 device engineer jobs found in Orlando

Description: You will be the FPGA Design Engineer for the Missile & Fire Control (MFC) team at Lockheed Martin. Our team delivers advanced FPGA solutions that enable current and next generation defense systems, providing the high performance computing and signal processing capabilities required for mission critical platforms. What You Will Be Doing As the FPGA Design Engineer you will develop FPGA architectures from specification through implementation, conduct trade studies to optimize device utilization, power and thermal performance, and work closely with software, hardware and systems engineers to define requirements and ensure compliance with the Design Assurance process. Your responsibilities will include: • Translating system specifications into detailed FPGA designs, creating RTL, constraints and HDL code (VHDL/Verilog). • Performing synthesis, place and route, timing analysis and power budget assessments to meet performance, power and thermal budgets. •...

Description: You will be the HyperLynx Analog Simulation Engineer for the Circuit Card Design Technology Council within Lockheed Martin Missiles & Fire Control (MFC). Our council establishes the simulation standards, reusable model libraries and methodology that power every circuit card assembly (CCA) program across the MFC portfolio, ensuring mission critical hardware is designed with confidence and consistency. What You Will Be Doing As the HyperLynx Analog Simulation Engineer you will be responsible for leading SPICE based analog and mixed signal simulation work, authoring the department’s modeling standards, and partnering with Siemens technical leadership to shape the future of the HyperLynx/Xpedition tool suite. Your work will directly impact hardware designs from concept through verification and will be leveraged by programs for years to come. Your responsibilities will include: • Performing SPICE based analog and mixed signal simulations in Siemens HyperLynx...

Description: You will be the FPGA Engineer for the Digital Logic Integration team. Our team delivers mission critical hardware and software that connects sensors, actuators and compute platforms across a range of defense programs, ensuring reliable, high performance operation from concept through fielding. What You Will Be Doing As the FPGA Engineer you will capture and translate system requirements into detailed FPGA architectures, drive simulation and verification, and integrate designs with board level hardware. You will work closely with hardware, software and test partners to validate the complete system and lead design assurance activities that keep the program on schedule and compliant with aerospace standards. Your responsibilities will include • Elicit, refine and document functional and performance requirements for FPGA designs. • Create detailed RTL (VHDL/Verilog/SystemVerilog) and accompanying constraints to meet timing, power and reliability goals. • Develop and...

Description: You will be the Electromechanical Design Engineer for the Ignition Safety device (ISD) for the PrSM team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ISD (Ignition Safety device) packaging that will serve as the common ISD backbone for PrSM. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ISD • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials, obtaining vendor...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Command Launch Assembly (CLA) FPGA team within Missiles & Fire Control (MFC). Our team delivers the digital heart beat that powers the Next Generation Short Range Interceptor (NGSRI), turning system level performance and safety goals into reliable, production ready FPGA hardware for the United States and allied forces. What You Will Be Doing As the senior ASIC & FPGA designer you will own the full lifecycle of the CLA FPGA—from high level architecture through release ready documentation—while mentoring junior talent and partnering with a broad set of cross functional experts. Your responsibilities will include: • Defining FPGA architecture and drafting design specifications; writing clean RTL in VHDL/Verilog/SystemVerilog that satisfies performance, power, and reliability targets. • Developing synthesis, place and route, and timing closure strategies to guarantee deterministic operation on the...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Programmable Logic Design team supporting the Next Generation Short Range Interceptor (NGSRI). Our team creates the digital heart beats—ASICs and FPGAs—that enable precision engagement aerospace and defense systems for the United States and allied forces. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will own the architecture, development, verification, and delivery of the Datalink FPGA that powers the NGSRI. You’ll translate system level performance, safety, and reliability goals into robust, production ready logic while mentoring junior talent and collaborating across disciplines. Your responsibilities will include: • Defining architecture and design specifications for programmable logic components; writing clean, well documented RTL in VHDL/Verilog/SystemVerilog. • Developing synthesis, place and route, and timing closure strategies to achieve deterministic operation on...

Description: You will be the FPGA Design Engineer for Lockheed Martin’s Missile and Fire Control team. Our group designs, simulates, and integrates cutting edge datalink and launcher systems that keep our warfighters ahead of emerging threats. What You Will Be Doing As the FPGA Design Engineer you will develop FPGA solutions that power both existing and next generation defense systems. Your responsibilities will include: • Develop complex FPGA designs, including specification, design, verification, and implementation • Develop trade studies to select an FPGA solution optimized for device utilization, power and thermal requirements • Collaborate with cross-functional teams, including software, hardware, and systems engineering to develop an optimal architecture and develop FPGA requirements • Collaborate with the team through the Design Architecture development process Why Join Us Do you want to be part of a company culture that empowers employees to think big, lead with a...

Description: You will be the Electromechanical Design Engineer for the Common Command Flight Termination System (FTS) team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ISD (Ignition Safety device) packaging that will serve as the common ISD backbone for every new FTS. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ISD • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials,...

Description: Candidate will support the IRST Reliability, Maintainability & Testability team. Program and configurations include, but not limited to IRST F18, Legion, Legion-ES and IRST international. Primary role includes support and development of testability / Built In Test (BIT) concepts, processes, analyses and procedures for the IRST portfolio. Support the system design team to define and influence design for testability to ensure capabilities in the production and field. Support definition of testability requirements, test strategies and test concepts for achieving fault detection and fault isolation objectives to minimize system down time and expedite repairs for production and field. Support refinement of existing Built-In-Test (BIT) architecture concepts, allocate requirements, and mature design functions and features for BIT. Identify opportunities to maximize BIT capabilities to minimize test equipment logistics and support footprint. Support definition of...

Description: What You Will Be Doing You will be a Strategic Software, Staff with the ability to capture/derive requirements and perform CSCI/CSC/CSU decomposition, detailed design work, and bench level testing. Candidate will perform requirements capture through detailed design, implementation, and integration of a new System on a Chip (SoC) design for Block 1.1. Candidate will be responsible for supporting all data link software design including the following specialty capabilities: RF waveform implementation and incorporation of Simulink Coder into software, cryptographic algorithm development and debug, and low-speed messaging and communication with external peripherals. Prior experience with Microchip SoC’s, Xilinx SoC’s, UVM, and GitLab is preferred. As a Staff Software Engineer, your responsibilities will include but are not limited to: • Develop and maintain embedded software applications and/or desktop applications. • Tasks will involve requirement, design, code,...

Description: You will be the Circuit Card Design Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team designs, develops and fields precision engagement aerospace and defense systems, delivering high reliability circuit card assemblies (CCAs) that power missiles, sensors and other mission critical subsystems. What You Will Be Doing As the Circuit Card Design Engineer you will own the end to end creation of CCAs—from architecture and schematic capture through EPCAD layout, prototype build up and test. You will partner with systems, electromechanical, firmware/software and manufacturing groups to ensure every design meets performance, environmental and security requirements while keeping the program on schedule. Your responsibilities will include • Lead architecture, schematic capture and EPCAD layout for CCAs supporting missile and sensor subsystems. • Define, refine and document system, performance, interface and environmental...

Description: You will be the Senior Signal Integrity / Power Integrity Electrical Engineer responsible for ensuring the electrical performance of high-speed and mixed-signal printed circuit board assemblies across MFC programs. The engineer performs pre- and post-layout SI/PI analysis, defines PCB stack-ups and routing constraints, supports board sign-off, and partners with program design teams as a recognized subject-matter expert. This role contributes to the MFC SI Center of Excellence and helps establish design standards, modeling flows, and best practices that scale across the Circuit Card Design portfolio. What You Will Be Doing You will be responsible for: • Perform pre-layout SI/PI analysis on high-speed interfaces (DDR, PCIe, SerDes, Ethernet, USB) — channel modeling, eye-diagram and jitter budgets, termination strategy. • Define and review PCB stack-ups, controlled-impedance and length-matching rules, and via/breakout strategies in coordination with PCB designers. •...

Description: You will be the Printed Circuit Board (PCB) Layout Design Engineer for the Missiles & Fire Control (MFC) hardware development team. Our team delivers high density, high reliability electronics that power precision engagement systems for the United States and allied militaries. What You Will Be Doing As the PCB Layout Design Engineer you will own the complete layout process for complex, multi layer surface mount and mixed technology assemblies, ensuring every board meets performance, reliability, and manufacturability goals. Your responsibilities will include: • Designing high density, high speed PWB’s (10 + layers, double sided) using blind, buried, and micro vias, and handling high pin count BGAs, LGAs, and other fine pitch devices. • Performing component placement, trace routing, impedance control, and signal integrity optimization for both surface mount and limited thru hole, flex, or rigid flex sections. • Creating fabrication artwork and assembly...

Description: You will be the Printed Circuit Board (PCB) Layout Designer for the Missiles & Fire Control (MFC) hardware development team. Our team delivers high density, high reliability electronics that power precision engagement systems for the United States and allied militaries. What You Will Be Doing As the PCB Layout Designer you will own the complete layout process for complex, multi layer surface mount and mixed technology assemblies, ensuring every board meets performance, reliability, and manufacturability goals. Your responsibilities will include: • Designing high density, high speed PWB’s (10 + layers, double sided) using blind, buried, and micro vias, and handling high pin count BGAs, LGAs, and other fine pitch devices. • Performing component placement, trace routing, impedance control, and signal integrity optimization for both surface mount and limited thru hole, flex, or rigid flex sections. • Creating fabrication artwork and assembly drawings that follow...

Description: You will be the Circuit Card Design Engineer on the ADSWAP CN program. Our team delivers mission critical power electronics for advanced defense systems, driving schematic capture, EPCAD layout, and full cycle Design Assurance for high reliability circuit card assemblies. What You Will Be Doing As the Circuit Card Design Engineer you will own end to end design—from initial concept through layout, verification, and release—ensuring each design meets power distribution, EMI, grounding, isolation, and environmental requirements. You will work side by side with mechanical, software, and test engineers to accelerate procurement and test cycles while providing complete design data packages for Design Assurance reviews. Your responsibilities will include: • Capture schematics and produce EPCAD layouts using Siemens Xpedition Enterprise, applying best practice routing, signal integrity, and EMI mitigation techniques. • Develop power distribution circuit card assemblies...

Description: You will be a Engineering Aide at Lockheed Martin, turning engineering drawings into high quality electronic and electro mechanical assemblies. Our team supports both Engineering and Manufacturing Production, ensuring reliable hardware for critical defense programs. What You Will Be Doing As a Engineering Aide you will be responsible for building circuit cards, and wiring harnesses, then integrating them into single or multi bay cabinet units. You will work independently while collaborating closely with Engineers, Draftsmen, Procurement, and Quality Inspectors to keep projects on schedule and on spec. Your responsibilities will include: • Placing and soldering components on circuit cards and sub-assemblies according to blueprints, schematics, and engineering guides. • Fabricating wiring harnesses, including connector pinning, de pinning, and installation of mounting hardware. • Assembling lower-level builds into complete cabinet assemblies for...

Description: You will be the FPGA Design Engineer Lead for the Programmable Logic Design organization within Missiles & Fire Control (MFC). Our team defines the digital backbone of precision engagement aerospace and defense systems for the United States and allied militaries, delivering high performance FPGA/ASIC solutions that meet rigorous aerospace standards. What You Will Be Doing As the FPGA Design Engineer Lead you will act as the recognized technical authority for FPGA and ASIC development across the MFC portfolio. You’ll translate system requirements into production ready architectures, mentor engineers, and steer the strategic direction of programmable logic capabilities. Your responsibilities will include: • Owning end to end development of sophisticated FPGA/ASIC architectures—from capture of requirements through production release. • Defining, designing, verifying, and implementing logic using VHDL/Verilog in AMD Vivado, Intel Quartus, or equivalent...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. Advanced Programs is seeking an Electro-Optical (EO) Engineer who is passionate about EO and can apply technical skills to develop optimized solutions for complex challenges. What You Will Be Doing Your skill set should include physics-based modeling, FLIR characterizations, image processing and/or algorithm development. The EO Engineer must understand the sensitivities associated with the various parts of the imaging chain to quickly and effectively perform system design trades. Must be willing to increase technical depth and breadth in EO as a path...

Description: You will be the Circuit Design Engineer Senior for the Laser Weapon System (LWS) Turret Control team. Our team develops the high precision control circuit assemblies that drive the turret closing motor loops for next generation directed energy weapons, ensuring reliable, rapid target acquisition and engagement. What You Will Be Doing As the Circuit Design Engineer Senior you will own the end to end development of the control circuit hardware—from initial concept through detailed design, simulation, verification, fabrication support and system integration. You will work closely with servo specialists, subject matter experts, mechanical packaging engineers and external vendors to deliver a robust, high performance, producible CCA that meets stringent laser weapon requirements. Your responsibilities will include: • Own the full product lifecycle for control circuit assemblies (CCA) • Develop detailed schematics and PCB layouts using industry standard tools. •...

Description: You will be the Senior ElectroMechanical Engineer on the Advanced Programs hardware engineering team within Lockheed Martin Missiles & Fire Control (MFC). Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries. You’ll work on cutting edge electronics packaging, hands on prototype builds, production support, and technical leadership that directly impact next generation missile and radar programs. What You Will Be Doing As the Senior ElectroMechanical Engineer you will act as a key technical contributor on one or more defense programs, guiding hardware from concept through low rate production and full rate manufacturing. You’ll lead cross functional teams, create detailed electromechanical models and drawings, define test criteria, and drive issue resolution while mentoring junior engineers and championing an inclusive, collaborative culture. Your responsibilities will include: • Lead...