27 information assurance engineer jobs found in Orlando

Description: You will be the FPGA Design Engineer for the Missile & Fire Control (MFC) team at Lockheed Martin. Our team delivers advanced FPGA solutions that enable current and next generation defense systems, providing the high performance computing and signal processing capabilities required for mission critical platforms. What You Will Be Doing As the FPGA Design Engineer you will develop FPGA architectures from specification through implementation, conduct trade studies to optimize device utilization, power and thermal performance, and work closely with software, hardware and systems engineers to define requirements and ensure compliance with the Design Assurance process. Your responsibilities will include: • Translating system specifications into detailed FPGA designs, creating RTL, constraints and HDL code (VHDL/Verilog). • Performing synthesis, place and route, timing analysis and power budget assessments to meet performance, power and thermal budgets. •...

Description: You will be the Circuit Card Design Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team designs, develops and fields precision engagement aerospace and defense systems, delivering high reliability circuit card assemblies (CCAs) that power missiles, sensors and other mission critical subsystems. What You Will Be Doing As the Circuit Card Design Engineer you will own the end to end creation of CCAs—from architecture and schematic capture through EPCAD layout, prototype build up and test. You will partner with systems, electromechanical, firmware/software and manufacturing groups to ensure every design meets performance, environmental and security requirements while keeping the program on schedule. Your responsibilities will include • Lead architecture, schematic capture and EPCAD layout for CCAs supporting missile and sensor subsystems. • Define, refine and document system, performance, interface and environmental...

Description: You will be the FPGA Engineer for the Digital Logic Integration team. Our team delivers mission critical hardware and software that connects sensors, actuators and compute platforms across a range of defense programs, ensuring reliable, high performance operation from concept through fielding. What You Will Be Doing As the FPGA Engineer you will capture and translate system requirements into detailed FPGA architectures, drive simulation and verification, and integrate designs with board level hardware. You will work closely with hardware, software and test partners to validate the complete system and lead design assurance activities that keep the program on schedule and compliant with aerospace standards. Your responsibilities will include • Elicit, refine and document functional and performance requirements for FPGA designs. • Create detailed RTL (VHDL/Verilog/SystemVerilog) and accompanying constraints to meet timing, power and reliability goals. • Develop and...

Description: You will be the System Integration, Test, and Evaluation (IT&E) Engineer to support a program's system integration and system qualification initiatives in Orlando, FL. Our team is responsible for executing sub-system and system level integration and tests for new and existing products. What You Will Be Doing As the IT&E Engineer, you will be responsible for working in the laboratory onsite: • Generating and executing sub-system and system level integration and test plans/procedures • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for complex circuit cards. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of a control module design. • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing schematics and collaborating with EPCAD to...

Description: You will be the Circuit Card Design Engineer (GPS M-Code IPT Lead) for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer (GPS M-Code IPT Lead) you will drive the architecture, schematic capture, and EPCAD layout for complex circuit cards. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of a control module design. • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for complex circuit cards. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for complex systems • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing schematics and...

Description: You will be the Electromechanical Engineer for the Hardware Engineering team within Missiles & Fire Control (MFC). Our team delivers the high reliability electronic packaging, harnesses, and enclosures that power missile and radar systems for the United States and allied militaries. What You Will Be Doing As the ElectroMechanical Engineer you will own the end to end development and production of electromechanical hardware on one or more defense programs. You’ll lead cross functional teams, mentor junior engineers, and ensure every design meets strict size, weight, power, and environmental requirements. Your responsibilities will include: • Leading hardware development and production efforts, driving schedules, quality, and cost targets. • Designing CCA/PWB packages, harness assemblies, and electronic enclosures; creating detailed 3 D models, 2 D drawings, and layout documents in Windchill/CREO. • Selecting materials, components, and manufacturing processes...

Description: You will be the Printed Circuit Board (PCB) Layout Design Engineer for the Missiles & Fire Control (MFC) hardware development team. Our team delivers high density, high reliability electronics that power precision engagement systems for the United States and allied militaries. What You Will Be Doing As the PCB Layout Design Engineer you will own the complete layout process for complex, multi layer surface mount and mixed technology assemblies, ensuring every board meets performance, reliability, and manufacturability goals. Your responsibilities will include: • Designing high density, high speed PWB’s (10 + layers, double sided) using blind, buried, and micro vias, and handling high pin count BGAs, LGAs, and other fine pitch devices. • Performing component placement, trace routing, impedance control, and signal integrity optimization for both surface mount and limited thru hole, flex, or rigid flex sections. • Creating fabrication artwork and assembly...

Description: You will be the Circuit Card Design Engineer on the ADSWAP CN program. Our team delivers mission critical power electronics for advanced defense systems, driving schematic capture, EPCAD layout, and full cycle Design Assurance for high reliability circuit card assemblies. What You Will Be Doing As the Circuit Card Design Engineer you will own end to end design—from initial concept through layout, verification, and release—ensuring each design meets power distribution, EMI, grounding, isolation, and environmental requirements. You will work side by side with mechanical, software, and test engineers to accelerate procurement and test cycles while providing complete design data packages for Design Assurance reviews. Your responsibilities will include: • Capture schematics and produce EPCAD layouts using Siemens Xpedition Enterprise, applying best practice routing, signal integrity, and EMI mitigation techniques. • Develop power distribution circuit card assemblies...

Description: You will be the Electromechanical Design Engineer for the Missiles & Fire Control (MFC) Carrier Card Assembly (CCA) team. Our team creates the mechanical electrical hardware that powers advanced missile systems and supports production line delivery for U.S. and allied defense programs. What You Will Be Doing As the Electromechanical Design Engineer you will develop innovative electromechanical concepts, generate production ready documentation, and provide hands on support throughout the build to field process. You’ll work independently when needed and collaborate closely with a wide range of specialists to keep designs on schedule and compliant. Your responsibilities will include: • Designing and detailing electromechanical systems and CCA components, including material, component, and process selection. • Creating 3 D layouts, 2 D drawings, and all required engineering deliverables in Windchill. • Coordinating with structural, thermal, configuration...

Description: You will be the Electromechanical Design Engineer for the Ignition Safety device (ISD) for the PrSM team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ISD (Ignition Safety device) packaging that will serve as the common ISD backbone for PrSM. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ISD • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials, obtaining vendor...

Description: You will be the FPGA Design Engineer Lead for the Programmable Logic Design organization within Missiles & Fire Control (MFC). Our team defines the digital backbone of precision engagement aerospace and defense systems for the United States and allied militaries, delivering high performance FPGA/ASIC solutions that meet rigorous aerospace standards. What You Will Be Doing As the FPGA Design Engineer Lead you will act as the recognized technical authority for FPGA and ASIC development across the MFC portfolio. You’ll translate system requirements into production ready architectures, mentor engineers, and steer the strategic direction of programmable logic capabilities. Your responsibilities will include: • Owning end to end development of sophisticated FPGA/ASIC architectures—from capture of requirements through production release. • Defining, designing, verifying, and implementing logic using VHDL/Verilog in AMD Vivado, Intel Quartus, or equivalent...

Description: You will be the Senior Circuit Design Engineer for the Command Launch Assembly (CLA) Carrier Card Assembly (CCA) team within Missiles & Fire Control (MFC). Our team delivers the high performance electronic hardware that powers the Next Generation Short Range Interceptor (NGSRI) and other precision engagement systems for the United States and allied forces. What You Will Be Doing As the Senior Circuit Design Engineer you will own the end to end design of the CCA, translating system requirements into reliable, production ready circuit cards that power, communicate with, and integrate into the launcher’s subsystems. You will work hand in hand with mechanical, electrical, and systems engineers, perform verification and validation, and ensure every design meets rigorous power conditioning, signal integrity, and environmental standards. Your responsibilities will include: • Defining performance, power, and interface requirements for the CCA and documenting them in...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for complex circuit cards. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for complex systems • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing schematics and...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will oversee technical execution, translate system requirements into subsystem designs, and create electrical interface and power distribution architectures. You will work closely with software, hardware and systems engineers, drive Integrated Master Schedule (IMS) tasking, manage procurement and testing, and guide the team through the Design Assurance process. Your responsibilities will include: • Developing detailed schematics, 3 D models and bill of materials for circuit card assemblies (CCAs) that meet size, weight, power and environmental constraints. • Performing signal integrity, power integrity and...

Description: You will be the Electromechanical Design Engineer for the Common Command Flight Termination System (FTS) team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ESAF (Electronic Safe and Arm Fuze) packaging that will serve as the common ESAF backbone for every new FTS. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ESAF • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials,...

Description: You will be the Senior ElectroMechanical Engineer on the Advanced Programs hardware engineering team within Lockheed Martin Missiles & Fire Control (MFC). Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries. You’ll work on cutting edge electronics packaging, hands on prototype builds, production support, and technical leadership that directly impact next generation missile and radar programs. What You Will Be Doing As the Senior ElectroMechanical Engineer you will act as a key technical contributor on one or more defense programs, guiding hardware from concept through low rate production and full rate manufacturing. You’ll lead cross functional teams, create detailed electromechanical models and drawings, define test criteria, and drive issue resolution while mentoring junior engineers and championing an inclusive, collaborative culture. Your responsibilities will include: • Lead...

Description: You will be the Senior ASIC & FPGA Design Engineer for the ADSWAP CN program. Our team builds the next generation missile and fire control systems that power aerospace and defense grade platforms. We turn ambitious system concepts into hardened hardware, partnering with software, hardware, and systems engineers to deliver integrated, high performance solutions. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will lead the end to end creation of sophisticated FPGA architectures—from initial concept through detailed implementation and verification. You will define specifications, run trade off studies, and ensure every design meets rigorous power, thermal, and utilization targets while staying aligned with Design Assurance standards. Your responsibilities will include: • Develop complete FPGA design specifications and high level architecture in collaboration with cross functional teams. • Select the optimal FPGA family (Xilinx, Intel,...

Description: You will be the Electromechanical Design Engineer for the Common Command Flight Termination System (FTS) team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ISD (Ignition Safety device) packaging that will serve as the common ISD backbone for every new FTS. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ISD • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials,...