20 legal jobs found in Orlando

Description: You will be the Senior Mechanical Design Engineer for the RF Product Center – Missile & Fire Control team. Our team designs, develops, and provides production support for high temperature antenna hardware that powers mission critical sensor systems. What You Will Be Doing As the Senior Mechanical Design Engineer you will own the mechanical design effort for RF sensors, working hand in hand with the design lead and cross functional IPTs. You’ll create 3 D CAD models, develop conceptual layouts, run tolerance analyses, and generate production ready drawings for components such as heat sinks, covers, and brackets. You’ll also lead design trade studies and coordinate developmental test (DVT) activities to keep performance, cost, and schedule on target. Your responsibilities will include: • Produce and maintain high quality 3 D CAD models and 2 D drawings for RF sensor mechanical parts. • Perform conceptual design, tolerance stack up, and thermal/mechanical...

Description: Lockheed Martin is seeking an Integration and Test (I&T) Engineer to support an Electro-Optical sensor development activities. What You Will Be Doing • Develop and execute System Level Test Plans and Procedures • Definition of Test Approach and Test Equipment requirements • Perform Environmental Qualification and/or EMI testing • Plan and conduct Mission Success, Test Readiness and Pre-Ship Readiness Reviews. • Coordinate and manage test article builds and scheduling • Coordinate with offsite test ranges to define test requirements and approach along with range scheduling. • Conduct and support Test Planning working groups with internal and external stakeholders • Solicit test approach inputs from Reliability, Software, Electrical, Mechanical and other cross-functional disciplines. • Trace compliance to Performance Specifications and MIL-STDs and support the V&V process • Some domestic travel may be expected, approx 20% in 1-2 week segments Why Join...

Description: You will be an FPGA Design Engineer for Lockheed Martin’s Missile and Fire Control team. Our group designs, simulates, and integrates cutting edge defense systems that keep our warfighters ahead of emerging threats. What You Will Be Doing As the FPGA Design Engineer you will develop FPGA solutions that power both existing and next generation defense systems. Your responsibilities will include: - Develop complex FPGA designs, including specification, design, verification, and implementation -Develop trade studies to select an FPGA solution optimized for device utilization, power and thermal requirements -Collaborate with cross-functional teams, including software, hardware, and systems engineering to develop an optimal architecture and develop FPGA requirements -Collaborate with the team through the Design Architecture development process Why Join Us Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset,...

Description: You will be a Engineering Aide at Lockheed Martin, turning engineering drawings into high quality electronic and electro mechanical assemblies. Our team supports both Engineering and Manufacturing Production, ensuring reliable hardware for critical defense programs. What You Will Be Doing As a Engineering Aide you will be responsible for building circuit cards, and wiring harnesses, then integrating them into single or multi bay cabinet units. You will work independently while collaborating closely with Engineers, Draftsmen, Procurement, and Quality Inspectors to keep projects on schedule and on spec. Your responsibilities will include: • Placing and soldering components on circuit cards and sub-assemblies according to blueprints, schematics, and engineering guides. • Fabricating wiring harnesses, including connector pinning, de pinning, and installation of mounting hardware. • Assembling lower-level builds into complete cabinet assemblies for...

Description: You will be the Circuit Card Design Engineer for Missile & Fire Control at Lockheed Martin. Our team creates cutting edge electro optical/infrared (EO IR) products that deliver critical sensor capability for missile and aerospace platforms. What You Will Be Doing As the Circuit Card Design Engineer you will oversee technical execution, translate system requirements into subsystem designs, and create electrical interface and power distribution architectures. You will work closely with software, hardware and systems engineers, drive Integrated Master Schedule (IMS) tasking, manage procurement and testing, and guide the team through the Design Assurance process. Your responsibilities will include: • Developing detailed schematics, 3 D models and bill of materials for circuit card assemblies (CCAs) that meet size, weight, power and environmental constraints. • Performing signal integrity, power integrity and thermal analyses to validate designs and ensure...

Description: You will be the Mechanical Design Engineer for the F 35 Electro Optical Targeting System (EOTS) team in Orlando, FL. Our team delivers cutting edge mechanical solutions that keep the F 35’s mission critical sensors operating flawlessly, driving innovation from concept through production. What You Will Be Doing As the Mechanical Design Engineer you will be responsible for turning tough production and design challenges into elegant, manufacturable solutions. Working side by side with production, hardware design, and analysis groups, you’ll create new parts, issue engineering changes, and supply the detailed data the supply chain needs to build and ship world class hardware. Your responsibilities will include: • Generating and maintaining 3 D solid models and 2 D drawings in the Digital Product Lifecycle Management (dPLM) environment. • Producing release ready engineering documents (drawings, BOMs, assembly parts lists) for fabrication and procurement. •...

Description: You will be the FPGA Design & Verification Engineer for the Lockheed Martin Advanced Technologies team. Our team creates cutting edge FPGA based solutions that power next generation defense and aerospace systems, delivering high performance computing, signal processing and real time control. What You Will Be Doing As the FPGA Design & Verification Engineer you will capture and derive system requirements, design, simulate and integrate FPGA architectures, and develop verification environments. You will troubleshoot existing designs, implement updates, and build new FPGA solutions from concept through production, working closely with the Programmable Logic Design Lead and cross functional engineers. Your responsibilities will include: • Translating system requirements into detailed FPGA designs, writing HDL code (SystemVerilog preferred, VHDL acceptable) and generating synthesis, placement, routing and timing constraints. • Developing self checking...

Description: You will be the Programmable Logic & ASIC Center of Excellence (CoE) Lead for the Missiles & Fire Control (MFC) organization. Our CoE provides end to end hardware development for programmable logic devices, custom ASICs and system on chip solutions, delivering unified, reusable flows and metrics that support multiple MFC programs. What You Will Be Doing As the PL/ASIC CoE Lead you will set the strategic and technical direction for PL and ASIC development, define the CoE charter and roadmap, align scope with senior leadership, and own tool/flow automation and continuous integration gates. You will drive common core digital and verification standards, ensure consistency across tools and processes, and mentor talent while contributing expertise to MFC programs. Your responsibilities will include: • Defining, maintaining and regularly updating the CoE charter, roadmap and multi year improvement plan. • Chairing CoE meetings, hosting quarterly steering...

Description: You will be the FPGA Design Engineer for the Missile & Fire Control (MFC) team at Lockheed Martin. Our team delivers advanced FPGA solutions that enable current and next generation defense systems, providing the high performance computing and signal processing capabilities required for mission critical platforms. What You Will Be Doing As the FPGA Design Engineer you will develop FPGA architectures from specification through implementation, conduct trade studies to optimize device utilization, power and thermal performance, and work closely with software, hardware and systems engineers to define requirements and ensure compliance with the Design Assurance process. Your responsibilities will include: • Translating system specifications into detailed FPGA designs, creating RTL, constraints and HDL code (VHDL/Verilog). • Performing synthesis, place and route, timing analysis and power budget assessments to meet performance, power and thermal budgets. •...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for complex circuit cards. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for complex systems • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing schematics and...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Multi Domain Missile Warning Payload team. Our team creates large format, high frame rate imaging sensor systems that provide survivability enhancing situational awareness for air, space and surface platforms. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will work side by side with a PLD subject matter expert to architect, design and implement programmable logic solutions for the imaging sensor system. You will integrate hardware, develop test plans and verify performance on demanding space based platforms, contributing to a scalable, high performance missile warning payload. Your responsibilities will include: • Define architecture and design specifications for programmable logic components, develop and document RTL (VHDL/Verilog/SystemVerilog) gate level designs that meet performance, power, and reliability requirements. • Create synthesis, place and route, and timing...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Laser Weapon System (LWS) Turret Closing team. Our team is responsible for delivering high performance, low latency FPGA based closed loop motor control solutions that enable rapid, precise turret positioning for next generation directed energy weapons. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will lead the end to end development of the FPGA motor control hardware, translating system level performance, safety and reliability requirements into a robust architecture, driving verification, hardware in the loop testing and integration, and shepherding the design from concept through production release. Your responsibilities will include: • Capturing and translating system level performance, safety and reliability requirements into a detailed FPGA architecture. • Developing and verifying RTL using SystemVerilog/Verilog and Xilinx/AMD toolsets, creating synthesis, timing and...

Description: You will be the Circuit Design Engineer Senior for the Laser Weapon System (LWS) Turret Control team. Our team develops the high precision control circuit assemblies that drive the turret closing motor loops for next generation directed energy weapons, ensuring reliable, rapid target acquisition and engagement. What You Will Be Doing As the Circuit Design Engineer Senior you will own the end to end development of the control circuit hardware—from initial concept through detailed design, simulation, verification, fabrication support and system integration. You will work closely with servo specialists, subject matter experts, mechanical packaging engineers and external vendors to deliver a robust, high performance, producible CCA that meets stringent laser weapon requirements. Your responsibilities will include: • Own the full product lifecycle for control circuit assemblies (CCA) • Develop detailed schematics and PCB layouts using industry standard tools. •...

Description: You will be a FPGA Design & Verification Engineer at Lockheed Martin, responsible for designing, simulating, and integrating Field-Programmable Gate Arrays (FPGAs). Our team is looking for a talented engineer to join our team and support the development of cutting-edge technologies. What You Will Be Doing As the FPGA Engineer you will perform requirements capture, design architecture, implementation, simulation, integration, and troubleshooting for the datalink FPGA designs that are being used to support a new capability. Your responsibilities will include: • Capturing and deriving requirements for FPGA designs • incorporate new crypto architecture leveraging existing NSA algorithms interfacing with data link radio module • RF waveform implementation and incorporation of Simulink/HDL Coder into FPGA design and low-speed messaging and communication with external peripherals • Working with Xilinx/AMD or Microchip FPGA to development solution for Complex...

Description: You will be the ElectroMechanical Design Engineer for the Advanced Electronics Packaging team at Lockheed Martin Missiles & Fire Control. Our team pioneers 2 D/3 D heterogeneous packaging concepts, integrating thin film, semiconductor and high performance thermal management technologies to create next generation electronic systems for aerospace and defense missions. What You Will Be Doing As the ElectroMechanical Design Engineer you will design, prototype and test cutting edge packaging solutions while collaborating with electrical, systems, test and product design engineers. You will work side by side with Lockheed Martin’s senior Advanced Packaging SME, gaining hands on experience with emerging semiconductor manufacturing processes and translating them into flight qualified hardware. Your responsibilities will include: • Conceiving and modeling 2 D/3 D heterogeneous package architectures that meet size, weight, power and reliability targets. • Developing...

Description: You will be a Systems Integration and Test Engineer for Lockheed Martin's Missiles & Fire Control division. Our team is responsible executing Lab, Ground, and Flight testing to ensure successful development and deployment of critical systems. What You Will Be Doing As the IT&E Engineer, you will be responsible for the following: • Generating and executing sub-system and system level integration and test plans/procedures • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide engineering evaluations of redesigns or upgrades to the existing missile...

Description: You will be the Electro Mechanical Design Engineer for the Advanced Programs team at Lockheed Martin Missiles & Fire Control in Orlando, FL. Our team designs, develops and integrates flight worthy military electronics—processor modules, interface cards, power boards and flex assemblies—into high performance missiles and aerospace systems, often under extreme space, thermal and size constraints. What You Will Be Doing As the Electro Mechanical Design Engineer you will lead the hardware development effort for these complex electronic assemblies, coordinating cross functional teams to take concepts from initial design through integration, test and production. You will apply high density packaging expertise, mentor junior engineers and ensure the hardware meets every mission and safety requirement. Your responsibilities will include: • Developing detailed electromechanical designs for close proximity circuit cards, cable assemblies and mechanical support...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh environments. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for Advanced Programs. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple rigidflex circuit card assemblies • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing schematics and collaborating with EPCAD to create layout and signal routing...

Description: You will be the Senior Electromechanical Engineer for the Air Dominance Electromechanical Engineering team in Orlando, Florida. Our team is responsible for designing, integrating and qualifying complex electromechanical packages—electronics cards, cable harnesses and supporting structures—that enable both test bed hardware and production line systems for advanced air dominance platforms. What You Will Be Doing As the Senior Electromechanical Engineer you will lead the creation of high performance hardware solutions, drive design assurance activities, and support integration of subsystems into the laboratory environment. You will serve as the technical bridge between design, program management and the customer, ensuring that every package meets stringent performance, safety and schedule requirements. Your responsibilities will include: • Developing detailed electromechanical designs for avionics cards, cable assemblies and mechanical support structures. •...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. We are seeking an RF Systems Analysis Engineer for Lockheed Martin, supporting RF simulation analysis, antenna test data analysis, and captive flight test performance data analysis. Our team is responsible for ensuring the performance of passive RF sensor systems, and you will play a key role in analyzing and evaluating sensor performance. What You Will Be Doing As the RF Systems Analysis Engineer, you will be responsible for: • Conducting RF requirements analyses and executing trade studies to optimize system performance • Analyzing test data, including signal...