30 mission engineer jobs found in Orlando

Description: Lockheed Martin Missiles and Fire in Orlando, FL is seeking an experienced Integration, Test, and Evaluation (IT&E) Engineer to support missile and sensor development programs. Our team is dedicated to delivering innovative solutions, and you will play a key role in supporting the test series leading up to flight testing. What You Will Be Doing The selected Integration, Test, and Evaluation (IT&E) Engineer will lead subsystem and system-level integration and testing, use of test equipment during missile processing, and preparation of test related documentation. The candidate will lead a team in the planning and execution of the development, qualification and integration test effort, to include subsystems and missile level activities. This role will also require the candidate to oversee the assembly and test of mockup missiles and live ordnance flight test missiles. The candidate will work under only general direction reporting to a program IT&E Lead....

Description: You will be the FPGA Design Engineer for the Missile & Fire Control (MFC) team at Lockheed Martin. Our team delivers advanced FPGA solutions that enable current and next generation defense systems, providing the high performance computing and signal processing capabilities required for mission critical platforms. What You Will Be Doing As the FPGA Design Engineer you will develop FPGA architectures from specification through implementation, conduct trade studies to optimize device utilization, power and thermal performance, and work closely with software, hardware and systems engineers to define requirements and ensure compliance with the Design Assurance process. Your responsibilities will include: • Translating system specifications into detailed FPGA designs, creating RTL, constraints and HDL code (VHDL/Verilog). • Performing synthesis, place and route, timing analysis and power budget assessments to meet performance, power and thermal budgets. •...

Description: What You Will Be Doing You will be a Strategic Software, Staff with the ability to capture/derive requirements and perform CSCI/CSC/CSU decomposition, detailed design work, and bench level testing. Candidate will perform requirements capture through detailed design, implementation, and integration of a new System on a Chip (SoC) design for Block 1.1. Candidate will be responsible for supporting all data link software design including the following specialty capabilities: RF waveform implementation and incorporation of Simulink Coder into software, cryptographic algorithm development and debug, and low-speed messaging and communication with external peripherals. Prior experience with Microchip SoC’s, Xilinx SoC’s, UVM, and GitLab is preferred. As a Staff Software Engineer, your responsibilities will include but are not limited to: • Develop and maintain embedded software applications and/or desktop applications. • Tasks will involve requirement, design, code,...

Description: You will be the Circuit Card Design Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team designs, develops and fields precision engagement aerospace and defense systems, delivering high reliability circuit card assemblies (CCAs) that power missiles, sensors and other mission critical subsystems. What You Will Be Doing As the Circuit Card Design Engineer you will own the end to end creation of CCAs—from architecture and schematic capture through EPCAD layout, prototype build up and test. You will partner with systems, electromechanical, firmware/software and manufacturing groups to ensure every design meets performance, environmental and security requirements while keeping the program on schedule. Your responsibilities will include • Lead architecture, schematic capture and EPCAD layout for CCAs supporting missile and sensor subsystems. • Define, refine and document system, performance, interface and environmental...

Description: You will be the HyperLynx Analog Simulation Engineer for the Circuit Card Design Technology Council within Lockheed Martin Missiles & Fire Control (MFC). Our council establishes the simulation standards, reusable model libraries and methodology that power every circuit card assembly (CCA) program across the MFC portfolio, ensuring mission critical hardware is designed with confidence and consistency. What You Will Be Doing As the HyperLynx Analog Simulation Engineer you will be responsible for leading SPICE based analog and mixed signal simulation work, authoring the department’s modeling standards, and partnering with Siemens technical leadership to shape the future of the HyperLynx/Xpedition tool suite. Your work will directly impact hardware designs from concept through verification and will be leveraged by programs for years to come. Your responsibilities will include: • Performing SPICE based analog and mixed signal simulations in Siemens HyperLynx...

Description: You will be the FPGA Engineer for the Digital Logic Integration team. Our team delivers mission critical hardware and software that connects sensors, actuators and compute platforms across a range of defense programs, ensuring reliable, high performance operation from concept through fielding. What You Will Be Doing As the FPGA Engineer you will capture and translate system requirements into detailed FPGA architectures, drive simulation and verification, and integrate designs with board level hardware. You will work closely with hardware, software and test partners to validate the complete system and lead design assurance activities that keep the program on schedule and compliant with aerospace standards. Your responsibilities will include • Elicit, refine and document functional and performance requirements for FPGA designs. • Create detailed RTL (VHDL/Verilog/SystemVerilog) and accompanying constraints to meet timing, power and reliability goals. • Develop and...

Description: You will be the ASIC & FPGA Design Engineer for the ASIC/FPGA department at Lockheed  Martin  Missiles  and  Fire  Control. Our team delivers full custom analog and mixed signal ICs that power advanced defense systems, ranging from 130 nm down to 12 nm and including high voltage BCD processes. What You Will Be Doing As the ASIC & FPGA Design Engineer you will own the entire layout flow—from floorplan through tape out—working hand in hand with circuit designers to turn schematic intent into high performance, parasitic aware physical designs. You will operate in a dual tool environment (Synopsys Custom Compiler and Cadence Virtuoso) and drive physical verification closure across multiple foundries, directly supporting mission critical programs. Your responsibilities will include: • Create floorplans, place and route analog blocks, optimizing area, matching, signal integrity and power delivery. • Drive DRC, LVS and ERC verification to achieve full closure...

Description: Lockheed Martin Missiles and Fire in Orlando, FL is seeking an experienced Integration, Test, and Evaluation (IT&E) Engineer to support missile and sensor development programs. Our team is dedicated to delivering innovative solutions, and you will play a key role in supporting the test series leading up to flight testing. What You Will Be Doing The selected Integration, Test, and Evaluation (IT&E) Engineer will lead subsystem and system-level integration and testing, use of test equipment during missile processing, and preparation of test related documentation. The candidate will lead a team in the planning and execution of the development, qualification and integration test effort, to include subsystems and missile level activities. This role will also require the candidate to oversee the assembly and test of mockup missiles and live ordnance flight test missiles. The candidate will work under only general direction reporting to a program IT&E Lead....

Description: You will be the Electrical Engineering Senior for the Air Launched Rapid Response Weapon (ARRW) Low Rate Initial Production (LRIP) team. Our team drives reliability across production, troubleshoots hardware issues, and partners with suppliers to guarantee that every circuit delivers mission critical performance. What You Will Be Doing As the senior electrical engineer you will serve as the technical liaison for the ARRW Vehicle Management Computer (VMC). You’ll thrive in a fast paced production environment, delivering rapid, accurate solutions while collaborating with engineering, test, and manufacturing groups. Travel averages 50 % of your time for a 12 month stint in Los Angeles, CA, giving you exposure to both field and office settings. Your responsibilities will include: • Acting as the primary point of contact for VMC hardware across the LRIP effort. • Performing electrical testing, firmware/FPGA verification, and electro mechanical packaging reviews to keep...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for complex circuit cards. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of a control module design. • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing schematics and collaborating with EPCAD to...

Description: You will be the Circuit Card Design Engineer (GPS M-Code IPT Lead) for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer (GPS M-Code IPT Lead) you will drive the architecture, schematic capture, and EPCAD layout for complex circuit cards. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of a control module design. • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for complex circuit cards. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for complex systems • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing schematics and...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for complex circuit cards. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for complex systems • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing schematics and...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will oversee technical execution, translate system requirements into subsystem designs, and create electrical interface and power distribution architectures. You will work closely with software, hardware and systems engineers, drive Integrated Master Schedule (IMS) tasking, manage procurement and testing, and guide the team through the Design Assurance process. Your responsibilities will include: • Developing detailed schematics, 3 D models and bill of materials for circuit card assemblies (CCAs) that meet size, weight, power and environmental constraints. • Performing signal integrity, power integrity and...

Description: You will be the Electromechanical Design Engineer for the Common Command Flight Termination System (FTS) team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ESAF (Electronic Safe and Arm Fuze) packaging that will serve as the common ESAF backbone for every new FTS. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ESAF • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials,...

Description: What We're Doing At Lockheed Martin, we believe that by applying the highest standards of business ethics and forward-thinking, everything is within our reach - and yours as a Lockheed Martin employee. We value your unique skills and expertise, and we aim to give back continuously by offering a wide variety of benefits and amenities to help our employees live flexible, balanced, and fulfilling lives at, and outside of, work. The Work Lockheed Martin Rotary and Missing Systems has an opportunity in Orlando for a mid-career Software Engineer supporting the Automatic Test Equipment (ATE) programs. An ATE Software Engineer is responsible for developing, updating, and integrating software applications on ATE hardware. ATE Software Engineers also support test program development and integration. As a key member of our Software Engineering team, you will: • Contribute to the creation of design solutions for complex engineering problems in the software cycle. •...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. What You Will Be Doing Lockheed Martin is seeking an RF Engineer, for the planning and completion of the product baseline development, integration, and verification efforts, as well as the planning and execution of current and future changes. The candidate will work extensively with suppliers to develop and execute qualification testing schemes and provide requirement verification artifacts. The candidate will need to closely collaborate with internal LM stakeholders as well as U.S Government representatives to ensure all requirements are met. Essential tasks...

Description: You will be the System Integration, Test, and Evaluation (IT&E) Engineer to support a program's system integration and system qualification initiatives in Orlando, FL. Our team is responsible for executing sub-system and system level integration and tests for new and existing products. What You Will Be Doing As the IT&E Engineer, you will be responsible for working in the laboratory onsite: • Generating and executing sub-system and system level integration and test plans/procedures • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide...

Description: You will be the Electromechanical Engineer for the Hardware Engineering team within Missiles & Fire Control (MFC). Our team delivers the high reliability electronic packaging, harnesses, and enclosures that power missile and radar systems for the United States and allied militaries. What You Will Be Doing As the ElectroMechanical Engineer you will own the end to end development and production of electromechanical hardware on one or more defense programs. You’ll lead cross functional teams, mentor junior engineers, and ensure every design meets strict size, weight, power, and environmental requirements. Your responsibilities will include: • Leading hardware development and production efforts, driving schedules, quality, and cost targets. • Designing CCA/PWB packages, harness assemblies, and electronic enclosures; creating detailed 3 D models, 2 D drawings, and layout documents in Windchill/CREO. • Selecting materials, components, and manufacturing processes...

Description: You will be the Circuit Design Engineer – Sniper Advanced Targeting Pod (ATP) for the Advanced Targeting Pod team. Our team delivers the high visibility Sniper pod that provides passive detection, high definition EO/IR imaging, laser designation, and two way video for air to air and air to surface missions. We design, develop, and sustain the circuit cards that keep the pod performing reliably in the most demanding combat environments. What You Will Be Doing As the Circuit Design Engineer, you will own the end to end lifecycle of ATP circuit cards—from schematic capture through fielded production—while supporting manpower planning, cost schedule management, and new business capture. Your responsibilities will include: • Creating detailed schematics and performing signal integrity, power, and RF simulations using Xilinx Vivado, Microsemi Libero, and other industry standard tools. • Driving hardware integration, qualification, and test campaigns to verify...