18 production test engineer jobs found in Orlando

Description: You will be the ARRW Mechanical Design Engineer Staff for the Missiles & Fire Control – ARRW Program. Our team is developing the first hypersonic missile to enter low rate production. What You Will Be Doing As the Mechanical Engineer for the Booster/All Up Round (AUR) you will be the primary mechanical engineering point of contact for ARRW LRIP and ARRW Incremental development. You will work closely with Glider mechanical engineering, AUR electrical engineering, and systems engineering to translate requirements into releasable technical data packages (TDPs). Your responsibilities will include: • Developing and generating CREO layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles • Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM • Coordinating the IPT team, suppliers, GSC, electronic packaging, optics, and structural/thermal/material analysts to ensure design...

Description: You will be the Senior Circuit Design Engineer for the Command Launch Assembly (CLA) Carrier Card Assembly (CCA) team within Missiles & Fire Control (MFC). Our team delivers the high performance electronic hardware that powers the Next Generation Short Range Interceptor (NGSRI) and other precision engagement systems for the United States and allied forces. What You Will Be Doing As the Senior Circuit Design Engineer you will own the end to end design of the CCA, translating system requirements into reliable, production ready circuit cards that power, communicate with, and integrate into the launcher’s subsystems. You will work hand in hand with mechanical, electrical, and systems engineers, perform verification and validation, and ensure every design meets rigorous power conditioning, signal integrity, and environmental standards. Your responsibilities will include: • Defining performance, power, and interface requirements for the CCA and documenting them in...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Programmable Logic Design team supporting the Next Generation Short Range Interceptor (NGSRI). Our team creates the digital heart beats—ASICs and FPGAs—that enable precision engagement aerospace and defense systems for the United States and allied forces. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will own the architecture, development, verification, and delivery of the Datalink FPGA that powers the NGSRI. You’ll translate system level performance, safety, and reliability goals into robust, production ready logic while mentoring junior talent and collaborating across disciplines. Your responsibilities will include: • Defining architecture and design specifications for programmable logic components; writing clean, well documented RTL in VHDL/Verilog/SystemVerilog. • Developing synthesis, place and route, and timing closure strategies to achieve deterministic operation on...

Description: You will be the Senior ElectroMechanical Engineer on the Advanced Programs hardware engineering team within Lockheed Martin Missiles & Fire Control (MFC). Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries. You’ll work on cutting edge electronics packaging, hands on prototype builds, production support, and technical leadership that directly impact next generation missile and radar programs. What You Will Be Doing As the Senior ElectroMechanical Engineer you will act as a key technical contributor on one or more defense programs, guiding hardware from concept through low rate production and full rate manufacturing. You’ll lead cross functional teams, create detailed electromechanical models and drawings, define test criteria, and drive issue resolution while mentoring junior engineers and championing an inclusive, collaborative culture. Your responsibilities will include: • Lead...

Description: Lockheed Martin Missiles and Fire Control is looking for a Mechanical Engineering Design to support the development and production of a missile system. What You Will Be Doing: As a Mechanical Engineering Design Engineer, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: * Developing and generating CREO layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles * Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM * Coordinating with the IPT team, suppliers, GSC, electronic packaging, optics, and structural/thermal/material analysts to ensure design excellence...

Description: You will be the Electromechanical Design Engineer for the Missile & Radar Electronics Packaging team. Our team delivers rugged enclosures, chassis, cold plates, card guides, wedge locks, and interconnect assemblies that enable high performance missile and radar hardware to operate reliably in demanding environments. What You Will Be Doing As the Electromechanical Design Engineer you will create and mature the mechanical and thermal solutions that marry the electronics to their protective structures. You’ll partner with circuit card designers, suppliers, and manufacturing partners to turn concepts into production ready hardware. Your responsibilities will include: • Developing detailed 3 D models and 2 D drawings in PTC Creo (ASME Y14.5/GD&T) and maintaining configuration control in Windchill (PDM/PLM). • Coordinating with circuit card designers to verify that CCA form factors, component heights, and connector placements fit the mechanical chassis and...

Description: You will be the Senior ElectroMechanical Engineer on the Advanced Programs hardware engineering team within Lockheed Martin Missiles & Fire Control (MFC). Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries. You’ll work on cutting edge electronics packaging, hands on prototype builds, production support, and technical leadership that directly impact next generation missile and radar programs. What You Will Be Doing As the Senior ElectroMechanical Engineer you will act as a key technical contributor on one or more defense programs, guiding hardware from concept through low rate production and full rate manufacturing. You’ll lead cross functional teams, create detailed electromechanical models and drawings, define test criteria, and drive issue resolution while mentoring junior engineers and championing an inclusive, collaborative culture. Your responsibilities will include: • Lead...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. What You Will Be Doing Lockheed Martin is seeking an RF Engineer, for the planning and completion of the product baseline development, integration, and verification efforts, as well as the planning and execution of current and future changes. The candidate will work extensively with suppliers to develop and execute qualification testing schemes and provide requirement verification artifacts. The candidate will need to closely collaborate with internal LM stakeholders as well as U.S Government representatives to ensure all requirements are met. Essential tasks...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. What You Will Be Doing Lockheed Martin is seeking an RF Engineer, for the planning and completion of the product baseline development, integration, and verification efforts, as well as the planning and execution of current and future changes. The candidate will work extensively with suppliers to develop and execute qualification testing schemes and provide requirement verification artifacts. The candidate will need to closely collaborate with internal LM stakeholders as well as U.S Government representatives to ensure all requirements are met. Essential tasks...

Description: You will be the Electrical Engineering Senior for the Air Launched Rapid Response Weapon (ARRW) Low Rate Initial Production (LRIP) team. Our team drives reliability across production, troubleshoots hardware issues, and partners with suppliers to guarantee that every circuit delivers mission critical performance. What You Will Be Doing As the senior electrical engineer you will serve as the technical liaison for the ARRW Vehicle Management Computer (VMC). You’ll thrive in a fast paced production environment, delivering rapid, accurate solutions while collaborating with engineering, test, and manufacturing groups. Travel averages 50 % of your time for a 12 month stint in Los Angeles, CA, giving you exposure to both field and office settings. Your responsibilities will include: • Acting as the primary point of contact for VMC hardware across the LRIP effort. • Performing electrical testing, firmware/FPGA verification, and electro mechanical packaging reviews to keep...

Description: You will be the Mechanical Design Engineer Sr for an Air Dominance development team. Our team is responsible for designing and producing key components of the missile system, including tactical and special test equipment hardware. What You Will Be Doing As the Mechanical Engineering Designer Sr, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: •Developing and generating CREO layouts and detailed model-based designs (MBD) for ICDs, components, sub-assemblies, assemblies, and integration test articles •Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM •Coordinating with the IPT team, suppliers, GSC,...

Description: You will be the Senior Mechanical Design Engineer for the RF Product Center – Missile & Fire Control team. Our team designs, develops, and provides production support for high temperature antenna hardware that powers mission critical sensor systems. What You Will Be Doing As the Senior Mechanical Design Engineer you will own the mechanical design effort for RF sensors, working hand in hand with the design lead and cross functional IPTs. You’ll create 3 D CAD models, develop conceptual layouts, run tolerance analyses, and generate production ready drawings for components such as heat sinks, covers, and brackets. You’ll also lead design trade studies and coordinate developmental test (DVT) activities to keep performance, cost, and schedule on target. Your responsibilities will include: • Produce and maintain high quality 3 D CAD models and 2 D drawings for RF sensor mechanical parts. • Perform conceptual design, tolerance stack up, and thermal/mechanical...

Description: You will be the FPGA Design & Verification Engineer for the Lockheed Martin Advanced Technologies team. Our team creates cutting edge FPGA based solutions that power next generation defense and aerospace systems, delivering high performance computing, signal processing and real time control. What You Will Be Doing As the FPGA Design & Verification Engineer you will capture and derive system requirements, design, simulate and integrate FPGA architectures, and develop verification environments. You will troubleshoot existing designs, implement updates, and build new FPGA solutions from concept through production, working closely with the Programmable Logic Design Lead and cross functional engineers. Your responsibilities will include: • Translating system requirements into detailed FPGA designs, writing HDL code (SystemVerilog preferred, VHDL acceptable) and generating synthesis, placement, routing and timing constraints. • Developing self checking...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Laser Weapon System (LWS) Turret Closing team. Our team is responsible for delivering high performance, low latency FPGA based closed loop motor control solutions that enable rapid, precise turret positioning for next generation directed energy weapons. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will lead the end to end development of the FPGA motor control hardware, translating system level performance, safety and reliability requirements into a robust architecture, driving verification, hardware in the loop testing and integration, and shepherding the design from concept through production release. Your responsibilities will include: • Capturing and translating system level performance, safety and reliability requirements into a detailed FPGA architecture. • Developing and verifying RTL using SystemVerilog/Verilog and Xilinx/AMD toolsets, creating synthesis, timing and...

Description: You will be the Electro Mechanical Design Engineer for the Advanced Programs team at Lockheed Martin Missiles & Fire Control in Orlando, FL. Our team designs, develops and integrates flight worthy military electronics—processor modules, interface cards, power boards and flex assemblies—into high performance missiles and aerospace systems, often under extreme space, thermal and size constraints. What You Will Be Doing As the Electro Mechanical Design Engineer you will lead the hardware development effort for these complex electronic assemblies, coordinating cross functional teams to take concepts from initial design through integration, test and production. You will apply high density packaging expertise, mentor junior engineers and ensure the hardware meets every mission and safety requirement. Your responsibilities will include: • Developing detailed electromechanical designs for close proximity circuit cards, cable assemblies and mechanical support...

Basic Qualifications Requires a Bachelor’s degree in Electrical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 10+ years of job-related experience, or a Master's degree plus 8 years of job-related experience.   Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES:   You will be responsible for: Collaborating with other product team stakeholders to move the concept through to production & delivery The electrical technical design, planning, scheduling, cost analysis, risk analysis and successful execution of major products Leading the design development of all electrical board designs along with firmware development Working with manufacturing and their processes to bring the product from concept through production and delivery Verifying that the...

Description: Join our Test Engineering Fabrication team as a Mechanical Fabricator supporting the development and build of mission-critical test equipment. In this hands-on role, you will be responsible for manufacturing, modifying, and assembling mechanical components used in complex electrical test systems that support a variety of defense programs. You will work in a machine shop environment producing custom metal parts and modifying purchased hardware to meet engineering requirements. This role requires the ability to interpret engineering drawings, select appropriate fabrication methods, and execute work with a high level of precision and quality. Work may include machining, drilling, tapping, cutting, fitting, and mechanical assembly of components that integrate into larger test systems. In addition to fabrication, you will support troubleshooting, rework, and continuous improvement efforts. You will collaborate closely with engineers, planners, and electrical fabrication...

Description: You will be the Hardware IPT Lead for the TacIRST CLASS system within the ATWS NBAE program. Our team delivers the high performance infrared search and track hardware that powers Lockheed Martin’s missile and fire control portfolio. You’ll lead a cross functional group of precision mechanical designers, electrical engineers, structural and thermal analysts, electromechanical designers, and components and materials specialists to bring the system from concept to production ready hardware. What You Will Be Doing As the IPT Lead you will own the end to end hardware design effort, tracking progress across all disciplines, aligning processor builds with the program schedule, and guiding the transition to a production engineering team that optimizes high rate manufacturing. You will collaborate closely with other engineering domains and program stakeholders to ensure the hardware meets performance, reliability, and cost targets. Your responsibilities will include: •...