12 construction jobs found

Standard Job Description Directs the architecting and designing of Radio Frequency systems and circuitry. Coordinates subordinate employee recruitment, selection and training, performance assessment, work assignments, salary, and recognition/disciplinary actions. Manages the design and development of RF circuitry used in high frequency and microwave applications, including receivers, transmitters, antennas, and frequency synthesizers. Leads the staff responsible for hardware layout, component evaluation, prototype construction, and test. Oversees the preparation of the following: test methods and specifications; analysis and testing of RF hardware to verify performance characteristics. Provides inputs to Product Development for formal documentation and supports manufacturing during the deliverable assembly and test phase. Manages the development of RF System/Subsystem Architectures consisting of: antennas, transmitters, receivers, low noise amplifiers, high power amplifiers,...

Standard Job Description Functionally tests, retests, evaluates, and verifies the performance of electrical, electronic,electro-optical, and electro-mechanical assemblies in accordance with established test procedures. Works from written data, such as, engineering specification, established test procedures, drawings, and schematics. Configures and operates test equipment. Utilizes tooling required to test, align, adjust, evaluate, and verify conformance of electrical, electronic, electro-optical, electro-mechanical assemblies to verify conformance to engineering requirements in accordance with established test procedures. Accepts and rejects hardware and creates acceptance and rejection documentation. Performs troubleshooting, including component level of production assemblies requiring ingenuity and the application of electrical principles. Plans work independently. Prepares and maintains test records and reports as required. Assists Test Engineering personnel and...

Standard Job Description You will be the Circuit Card Design Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team creates, prototypes and fields high reliability circuit card assemblies (CCAs) that power missiles, sensors and other mission critical defense systems for the United States and allied militaries. What You Will Be Doing As the Circuit Card Design Engineer you will own the end to end development of CCAs—from architecture and schematic capture through EPCAD layout, prototype build up and test. You will work hand in hand with systems, electromechanical, firmware/software and manufacturing partners to ensure every design meets performance, environmental and security requirements while keeping the program on schedule. Your responsibilities will include • Drive architecture, schematic capture and EPCAD layout for CCAs that support missile and sensor subsystems. • Define, refine and document system, performance,...

Standard Job Description Position details: Location: Littleton, CO Work Schedule: 9x80 Position type: Full-time onsite (this is not a hybrid position) Lockheed Martin Space is seeking a Staff RF Engineer to join our team in Littleton, CO ! By joining the Lockheed Martin Space Radio Frequency (RF) Talent Center (RFTC) team, you will contribute our mission supporting challenging programs related to Space Vehicles, Hypersonics, Human Space Flight and Interplanetary Missions, Missile Defense, and more. In this RF engineering role within LM Space, you will: - Support the Global Security portfolio of programs by supporting timing, frequency, and ephemeris design on world class RF Payloads across various stages in each program’s lifecycle. - Perform system design and architecture to identify optimal payload solutions for new program captures. - Engage in system requirements flow-down to implementation of hardware design, and integration and test to verify mission...

Description: Join Our Team as an Electronics Engineer where you will work on the development of a sophisticated state-of-the-art avionics product in a world class Integrated Product Development environment. Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Courtland AL and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and seeking an RF Design Engineer at Lockheed Martin's Andover, MA facility. We offer an excellent working environment with a mix of cutting-edge design and genuine hands-on electronics laboratory testing and product development. This exciting RF position provides an opportunity to be a key contributor on our team of industry-leading RF design experts. What You Will Be Doing In this role, the Senior Staff RF Engineer will lead the development and production of complex multi-function modules used in challenging high reliability applications in all phases of the product life...

Description: Join Our Team as an Avionics Electronics Engineer where you will work on developing the new Long Range Hypersonic Weapon (LRHW), leveraging our decades of hypersonic experience and expertise. Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Huntsville AL and be expected to work a flexible 9x80 schedule in the office full-time. Ready for a challenge at the speed of Hypersonic? Come join Lockheed Martin's Long Range Hypersonic Weapon team. Our system will travel at Mach 5 (over a mile per second)! Helping us create a system that goes that fast means overcoming several difficult physics and engineering challenges. You will be integrating hypersonic missile technology into an Army battery on a highly accelerated schedule to deliver a hypersonic operational prototype system to the Soldier. What does this role look like? The role focuses on designing and developing electrical interfaces...

Description: You will be the Harness Design Engineer for the Advanced Development Programs (ADP) team which is responsible for developing cutting‑edge aircraft harness and interconnect solutions. What You Will Be Doing As the Harness Design Engineer you will be responsible for translating electrical specifications into robust wiring harness designs, creating detailed routing diagrams, and ensuring integration across mechanical and structural domains. Your responsibilities will include: Produce electrical wiring schematic drawings and design intricate power distribution systems. Gather and validate specifications, generate routing diagrams, cable layouts, and installation procedures. Coordinate with mechanical, structural, and integration teams to resolve clashes and meet safety and compliance standards. Create and maintain documentation such as routing drawings, installation guides, and change‑request tracking. Develop supplier statements of work, oversee...

Description: You will be the Electrical Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team delivers precision engagement aerospace and defense systems, designing, building and fielding the electrical hardware that powers missiles, sensors and other mission critical subsystems for the United States and allied militaries. What You Will Be Doing As the Electrical Engineer you will drive the design, analysis, integration and test of circuit card assemblies (CCAs) and related electrical subsystems. You will work side by side with systems, software, manufacturing and quality partners, providing hands on laboratory support and production assistance to keep programs on schedule, on budget and fully compliant with defense standards. Your responsibilities will include • Design and analyze CCAs, performing schematic capture, PCB layout and integration with system level architectures. • Conduct electrical testing, troubleshooting and...

Description: Perform visual inspection and testing operations on aircraft electrical and electronic systems. Follow general instructions, standard inspection procedures, engineering drawings, engineering specifications, check sheets, and other written or oral instructions to perform standard electrical inspection and testing operations. Utilize Electronic Operation Sheet System (Solumina) for accountability of all assembly/inspection operations and test requirements. Inspect systems and components for physical conditions, proper identification, completion and installation of all parts and assemblies, satisfactory workmanship. Check for broken strands in wiring, sufficient strain relief, proper mechanical connection, identification, and condition of plugs, wiring, and insulation. Conduct high potential and insulation resistance test on fuel gage wiring antenna cables, as occasion requires. Document Non-Conformances utilizing Electronic Documentation System (Solumina) on...

Description: Space is a critical domain, connecting our technologies, our security, and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire, and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. Lockheed Martin Space, Specialty Engineering, is seeking an Electrical Component...

Standard Job Description As the electronics engineer you will be responsible for testing a variety of electronic equipment, system interconnect and cabling designs in support of the Test Support Products  You will participate in requirements analysis, configuration determination, design, materiel procurement, manufacturing, test and acceptance of cabling & interconnects for a wide variety of electrical and electromechanical test systems and multi-function integrated test equipment in support of the US Navy's Ballistic Missile Flight Test Program.     As the electronics engineer you will mentor junior engineers, interface extensively with our customer, as well as, senior leadership. You will also create/update project/process documentation that align to project requirements.    Specific responsibilities include but are not limited to:  Lead the design, procurement, assembly, test, and verification of missile test systems, including data  review and trending  Develop...