21 assembler jobs found

Description SAIC is seeking an Engineering Technician IV to join our team in Crane, Indiana, supporting advanced mixed-signal, digital, and RF electronic systems. In this hands-on role, you will test, troubleshoot, and repair complex hardware down to the component level using schematics, block diagrams, and specialized test equipment. You will work closely with engineers, fellow technicians, and government personnel to ensure reliable performance of critical defense systems. Position Description: RF Digital Circuit technical support: tests, troubleshoots, and repairs complex mixed-signal, digital, and radio frequency electronic hardware down to the component level. Circuit Analysis & Repair: Isolate faults on printed circuit boards (PCBs), modules, and cable assemblies using schematics and block diagrams. Conduct routine repair, retrofit, systems integration, calibration and testing; in-line repair and testing; operation of test equipment; coordinate test schedules;...

Description SAIC is seeking experienced Engineering Technicians to join our growing team at the Bedford Production Facility. Candidates must demonstrate expertise in system integration and assembly work and be comfortable working individually or as part of a team. Primary Responsibilities: Complete all assigned tasks as required for the project completion, including though not limited to mechanical system assembly, metal fabrication, electrical system installation, painting, etc... Maintaining readiness of equipment and tools to complete all given tasking. As part of the team, participate in efforts to improve processes and procedures for tasks that meet production and integration objectives. Conduct inspections, tests, evaluations, and document results for equipment and processes, proactively identifying and resolving issues to minimize rework. Duties may include additional logistics work as needed to ensure all items are staged and ready for operational tasks....

Description SAIC is seeking an Electrical Technician in support of a full-rate production program at the Bedford, Indiana Production Facility. This is a hands-on, production-floor role supporting the fabrication, integration, assembly, and testing of mission-critical containerized systems in direct support of systems operations. Key Responsibilities: Fabricate, assemble, and install electrical harnesses, cable assemblies, and wiring systems in accordance with engineering drawings and work instructions Perform crimping, soldering, and termination of connectors Build and test battery cable assemblies, power distribution systems, and low-voltage control wiring Read and interpret electrical schematics, wiring diagrams, and assembly drawings Perform continuity, insulation resistance, and functional testing of completed cable assemblies and electrical systems Support integration of communications equipment, RF systems, antennas, and electronic...

Description SAIC seeks an experienced and energetic Senior Hardware Engineer to directly support the modernization of the space launch ranges, meeting mission requirements, providing range capabilities, and supporting the Assured Access to Space (AATS) mission. The overarching purpose of the program is to perform system modernization and digital transformation projects that will enable the acceleration of the space launch cadence to enable the Spaceport of the future. This position is located in Santa Maria, CA. Job Responsibilities: Perform electrical and mechanical (signal, power & thermal) analysis at the rack level. Oversees installation and testing activities, attending planning reviews, engineering checkouts, functional testing, and walkdowns to verify system integrity and interface functionality. Generation of engineering drawings in accordance with ASME and IEEE standards, including rack assembly drawings, interconnect wiring diagrams and...

Description Manufacturing Engineer Location: Bedford, IN | Full-Time | Onsite About the Role SAIC is seeking a Manufacturing Engineer to support a new contract focused on system production for the Department of Defense. This is an exciting opportunity to join a dynamic production team working in a heavy fabrication and manufacturing environment. The Manufacturing Engineer will report directly to the Production Manager and will play a critical role in developing, implementing, and maintaining manufacturing methods, processes, and procedures to ensure the highest levels of quality, efficiency, and compliance. Key Responsibilities Develop, implement, and maintain methods, operation sequences, and processes in the manufacture and fabrication of parts, components, sub-assemblies, and final assemblies. Design sequence of operations and specify procedures for the fabrication of tools, equipment, and other functions that affect product performance. Support heavy...

Description SAIC is seeking a highly skilled Hardware Design Engineer with expertise in board-level circuit design. The ideal candidate will be capable of taking concepts from initial requirements through detailed circuit design, PCB layout, simulation, system integration, and hands-on laboratory validation. This role requires strong analytical skills, attention to detail, and proficiency working across RF, analog, and digital domains. Qualifications Key Responsibilities: Perform conceptual circuit design and develop system block diagrams. Select key components based on electrical, RF, thermal, and manufacturability requirements. Create detailed board layouts using Altium Designer, including schematic capture, component library creation, footprint definition, and fabrication documentation. Place and route PCB designs with attention to RF behavior, signal integrity, grounding, and manufacturability. Conduct circuit simulation using various engineering...

Description SAIC is seeking an Electronic Technician to support the US Navy in Indianapolis, IN. JOB DESCRIPTION: Supports engineering activities such as design, test, checkout, modification, fabrication and assembly of prototype electromechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment. Applications may include electronic circuits, photonics and logic systems. Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions. Assists in determining methods or actions to remedy malfunctions. Collects, maintains, organizes, compiles, and manipulates technical data. Prepares engineering documentation, reports, drawings (sketches/flow charts/diagrams/schematics, etc.). Performs mathematical calculations per engineering specifications. Undertakes analyses of data where guidelines are provided. JOB DUTIES: Assembles,...

Description SAIC is seeking a self-motivated and efficient Drafter / CAD Operator III for our CANES team in North Charleston, SC. The Drafter / CAD Operator will be responsible for providing design and drafting support to complete assembly models and drawings. The Drafter / CAD Operator will be an integral part of the team creating/updating Technical Data Packages (TDPs); being familiar with ASME standards, Technical Data Packages, and military drawing standards desired. The Drafter / CAD Operator will coordinate frequently with the drafting team lead for current assignments, as well as coordinating with the project engineer(s), to meet the customer demands. Experience with AutoCAD, Solidworks, and Adobe Pro is required. Qualifications Required Experience and Clearance: High school education or equivalent (GED) and four (4) years related experience; OR Associates degree in related discipline and two (2) years related experience. Two (2) years minimum...

Description SAIC is seeking a highly motivated Edge Systems Engineer to join our expanding, multi-disciplined team of professionals based out of our Identity and Data Sciences Laboratory (IDSL) in Upper Marlboro, MD. The ideal candidate will be instrumental in installing, testing, and evaluating on-prem and remote systems and processes that may improve the efficiency, effectiveness, and satisfaction of customer field activities. The IDSL team works with technologies that include biometric and identity acquisition and data processing systems, data capture instrumentation and recording systems, and high throughput screening systems. The IDSL team operates the internationally recognized Maryland Test Facility (MdTF; company website ) to carry out both large- and small-scale laboratory and field evaluations. The candidate will join a multi-disciplined team composed of scientists, engineers, and subject matter experts working to design, build, and execute the test cases required...

Description SAIC is seeking an Electrical Engineer Senior to assist with tasking related to the design, manufacture and sustainment of US Military related systems, and other military systems in support of its Indianapolis facility. Tasking will include but will not be limited to design, development, modification, evaluation and test of a variety of electronic equipment and electrical systems. May work with radar and RF systems, communications equipment and systems, circuitry components, analog and digital circuits and processors, control systems, acoustic systems, electro-optic systems, weapon system launch and control circuitry, and test equipment design and development. Candidate is expected to use and apply technical standards, principles, theories, concepts and techniques to design circuits, layout circuit cards, analyze electronic systems, and troubleshoot electronic and electrical constructs. Qualifications REQUIRED QUALIFICATIONS: ⦁ Bachelor's degree and...

Description SAIC is seeking an Electrical Engineer to assist with tasking related to the design, manufacture and sustainment of US Military related systems in support of its Indianapolis facility. Tasking will include but will not be limited to design, development, modification, evaluation and test of a variety of electronic equipment and electrical systems. May work with radar and RF systems, communications equipment and systems, circuitry components, analog and digital circuits and processors, control systems, acoustic systems, electro-optic systems, weapon system launch and control circuitry, and test equipment design and development. Candidate is expected to use and apply technical standards, principles, theories, concepts and techniques to design circuits, layout circuit cards, analyze electronic systems, and troubleshoot electronic and electrical circuits. Qualifications REQUIRED QUALIFICATIONS: ⦁ Bachelor's degree and two (2) years or more experience;...

Description SAIC is seeking an Aviation Systems Integrator to support the Software, Simulation, Systems Engineering, and Integration (S3I) Directorate Aviation System Integration Laboratory (SIL) programs in Huntsville, Alabama . This position provides the opportunity to design, integrate, troubleshoot, and sustain high-fidelity aviation system integration laboratories supporting the AH-64D/E Apache, CH-47F Chinook, and UH-60M/V Black Hawk platforms. The successful candidate will work alongside engineers, software developers, technicians, and Government personnel to develop hardware solutions, integrate aircraft systems, and support critical test events that directly contribute to Army Aviation modernization. The Aviation Systems Integrator will be responsible for but not limited to the following duties: Design electrical wiring schematics and cable assemblies using engineering best practices. Design, fabricate, install, and troubleshoot wire harnesses, interface...

Description SAIC is seeking an Engineering Technician in Middletown, RI . In this role, you fabricate, update, qualify, and troubleshoot electronic, electro-mechanical systems including constructing cable and harnesses. To perform these tasks, you will work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform duties. You will work with engineers and customers to resolve technical issues that arise and to qualify systems. You will be responsible for marking up and documenting changes as well as clarifying methods and processes to perform tasks to supply engineer documentation. Applicants should have experience of performing required tasks in similar product environment. Job Duties: Fabricate electronic / electro-mechanical test equipment. Fabricate wire cables and harnesses Inspect, test, and perform qualification processes for systems and sub-assemblies. Troubleshoot technical issues to functionality and compliance....

Description SAIC is seeking an Engineering Tech IV in Bedford Indiana to support the Common Aviation Command and Control System (CAC2S) program. JOB DESCRIPTION: As the Command-and-Control System Engineering Technician, you will be a critical member of our CAC2S team responsible for the installation, maintenance, and optimization of hardware systems essential for CAC2S operations. In this position, you will collaborate with a dedicated team of professionals to address complex and impactful challenges. You will work alongside government customers and contractor teams to address a variety of tasks and projects while fostering strong relationships with customers, sponsors, and industry partners. The role of Engineering Technician IV will involve maintaining and upgrading this system. Tasking will involve: Supporting engineering activities such as design, test, and modifications; working from schematics, diagrams, written and verbal descriptions, layouts or defined...

Description SAIC is seeking an Engineering Technician in Hanahan, SC . Duties and Responsibilities: Maintains, repairs, troubleshoots, modifies and installs various types of electronic equipment and related devices such as electronic transmitting and receiving equipment (e.g., radar, radio, television, telecommunication, sonar, and navigational aids); personal and main frame computers and terminals, industrial, medical, measuring, and controlling equipment; and industrial robotic devices. Determines equipment malfunctions, and applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode, and recommends changes in circuitry or installation specifications to simplify assembly and maintenance. Performs simple or routine tasks following detailed instructions, performs such tasks as replacing components, wiring circuits, repairing simple electronic equipment; and taking test readings using common...

Description SAIC is seeking a CAD Mechanical Engineer to support the U.S. Army Combat Capabilities Development Command (CCDEVCOM), Engineering and Systems Integration (ESI) Directorate, Quick Reaction Capability (QRC) Branch. This position is on-site in Aberdeen, MD. Relocation assistance may be offered. In support of the Information Analysis Center Multiple Award Contract (IAC MAC) and Task Order (TO), SAIC is seeking multiple qualified and cleared candidates. We are currently assembling our team of experienced professionals who have in-depth experience in providing expertise to support research, development, assessments, adaption, transformation, testing, integration, demonstrations, transition, fielding, sustainment, and enhancement of designated information and/or intelligence software systems. Job Duties: Lead a small team of CAD Designers to include team oversight, workload management, QA of work performed, task tracking and documentation using JIRA, reporting...

Description SAIC is seeking a CAD Drafter's to support the US Navy in North Charleston, SC . The ideal candidates will be responsible for providing design and drafting support to complete large complex assembly models and drawings. The CAD Drafter will be an integral part of the team creating/updating Technical Data Packages; being familiar with ASME standards, Technical Data Packages, and military drawing standards desired. The Drafter / CAD Operator will coordinate frequently with the drafting team lead for current assignments, as well as coordinating with the project engineer, to meet the customer demands. The candidate will be required to occasionally travel, locally, to the customer's facility where the vehicles are located to work with the engineers and technicians to develop prototype mounting solutions. Efforts will be focused toward GFE and custom fabrication integration for military C4ISR systems. Job Duties: (include but are not limited to) Provide...

Description SAIC is seeking Senior Manufacturing Engineer in Middletown, RI to oversee the fabrication of Electro-Mechanical Systems is responsible for managing and optimizing manufacturing processes to ensure the delivery of high-quality, cost-effective, and reliable products. This role requires close collaboration with design engineers to ensure manufacturability, development of efficient production workflows, and management of materials, tools, and equipment. They drive continuous improvement initiatives, focusing on efficiency, cost reduction, and scalability, while maintaining safety standards and aligning project timelines. Effective communication, technical expertise, and leadership are critical to successfully bridging design, production, and quality objectives in this role. Key Responsibilities: Develop, implement, and optimize manufacturing processes to ensure high-quality, repeatable, and cost-effective fabrication of the electro-mechanical system. Develop...

Description SAIC is seeking an Integration Technician for our customer site in North Charleston, SC to support MADIS (Marine Air Defense Integrated System). Primary function includes activities such as basic machining, modification, fabrication, assembly and test for metal, electrical and COTS components. Job Description: Will be primarily tasked with performing moderate to complex vehicle integration tasks to include cable routing, metal work installations, and technical support to integrate, install, modify, and perform upgrades in support of C5ISR systems May assemble cabinets, chassis, consoles, or similar devices and install them with electronic or electro-mechanical equipment Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions Construct components, subunits, or simple models, adapt standard equipment, and troubleshoot system failures through various skill...

Description SAIC is seeking an Electrical Systems Engineer (EE2) to support the Expeditionary Electronic Warfare Division at NSWC Crane. This position supports RF and electrical engineering for signal communications management and power distribution supporting test and evaluation activities. The selected candidate will design and optimize electrical and electronic test range infrastructure, including wired and wireless communications and fiber-to-cellular towers. Additionally, this role involves managing range power distribution systems, performing power system studies, and testing/evaluating threat devices. Job Responsibilities: Provide RF and electrical engineering support for signal communications management and power distribution in support of MXQT test and evaluation activities. Design, analyze, evaluate, and optimize electrical and electronic test range infrastructure, including wired and wireless communications systems. Manage and support fiber-to-cellular...