15 design verification engineer jobs found

Description SAIC is seeking a CAD Drafter's to support the US Navy in North Charleston, SC . The ideal candidates will be responsible for providing design and drafting support to complete large complex assembly models and drawings. The CAD Drafter will be an integral part of the team creating/updating Technical Data Packages; being familiar with ASME standards, Technical Data Packages, and military drawing standards desired. The Drafter / CAD Operator will coordinate frequently with the drafting team lead for current assignments, as well as coordinating with the project engineer, to meet the customer demands. The candidate will be required to occasionally travel, locally, to the customer's facility where the vehicles are located to work with the engineers and technicians to develop prototype mounting solutions. Efforts will be focused toward GFE and custom fabrication integration for military C4ISR systems. Job Duties: (include but are not limited to) Provide...

Description Position Overview SAIC is hiring a Part Time Systems Engineer to support the Electromagnetic Expeditionary Electronic Warfare Division at NSWC Crane. This part-time position is intended for an experienced engineer who can provide focused technical support in diagnostics, test execution, troubleshooting, and sustainment engineering. The engineer will work across hardware, software, and subsystem interfaces to support fault detection, failure isolation, and maintainability. The work schedule and hours will be based on program needs and may include test events, troubleshooting, documentation, and technical reviews. Core Responsibilities Support the design, integration, evaluation, and sustainment of BIT/BITE and diagnostic capabilities for mission systems, subsystems, and test assets. Analyze system requirements and translate them into testable diagnostic functions, verification methods, and maintainability features. Support laboratory and field testing,...

Description SAIC is seeking an Software Systems Engineer in Chantilly, VA to support SAIC's large SETA program, supporting the NRO's Ground Enterprise Directorate (GED), Advanced Ground Office. The selected candidate will assist with system design, development, integration, testing, deployment, and sustainment of software solutions that enable mission-critical space vehicle operations. This entry-level role provides the opportunity to grow technical depth while collaborating with experienced engineers, mission operators, cybersecurity specialists, and program leadership across the system lifecycle. The engineer will contribute to ensuring software capabilities meet mission needs, integrate effectively with flight and ground segments, and comply with established engineering, security, and quality standards. Key Responsibilities to include: Support analysis of stakeholder and system requirements to derive software and interface requirements. Assist in developing and...

Description SAIC is seeking a Systems Engineer to support the Software, Simulation, Systems Engineering, and Integration (S3I) Directorate Aviation System Integration Laboratory (SIL) programs in Huntsville, Alabama . This position provides the opportunity to design, integrate, troubleshoot, and sustain high-fidelity aviation system integration laboratories supporting the AH-64D/E Apache, CH-47F Chinook, and UH-60M/V Black Hawk platforms. The successful candidate will work alongside engineers, software developers, technicians, and Government personnel to develop hardware solutions, integrate aircraft systems, and support critical test events that directly contribute to Army Aviation modernization. The Systems Engineer will be responsible for but not limited to the following duties: Design electrical wiring schematics and cable assemblies using engineering best practices. Design, fabricate, install, and troubleshoot wire harnesses, interface cables, and...

Description SAIC is seeking an Entry Level CAD Laborer to support the US Navy in Hanahan, SC . The ideal candidates will be responsible for providing design and drafting support to complete large complex assembly models and drawings. The CAD Drafter will be an integral part of the team creating/updating Technical Data Packages; being familiar with ASME standards, Technical Data Packages, and military drawing standards desired. The Drafter / CAD Operator will coordinate frequently with the drafting team lead for current assignments, as well as coordinating with the project engineer, to meet the customer demands. The candidate will be required to occasionally travel, locally, to the customer's facility where the vehicles are located to work with the engineers and technicians to develop prototype mounting solutions. Efforts will be focused toward GFE and custom fabrication integration for military C4ISR systems. Job Duties: (include but are not limited to) Provide...

Description JOB DESCRIPTION: SAIC is seeking a Senior Evolved Strategic Systems (ESS) Ground Systems Integration Specialist to join our team in El Segundo, CA. Due to security requirements, work is required to be on-site in a secure facility. SAIC is sub-contractor on the Military Satellite Communications (MILSATCOM) Systems Engineering, Integration and Test (MSEIT) contract. The MSEIT effort provides leading edge Systems Engineering & Integration (SE&I) for the Air Force's Space and Missiles System Center. We support the Air Force's acquisition of state-of-the-art Military Satellite Communications systems, providing global secure, survivable, and protected communications for our nation's warfighters. We seek technical individuals who will thrive in a highly collaborative work environment of small teams, using the most modern tools and methodologies to tackle the challenges of integrating complex space and ground communications systems. You will join a Systems...

Description JOB DESCRIPTION: SAIC is seeking a Principal Program Systems Integration Engineer to join our team in El Segundo, CA. Due to security requirements, work is required to be on-site in a secure facility. SAIC is sub-contractor on the Military Satellite Communications (MILSATCOM) Systems Engineering, Integration and Test (MSEIT) contract. The MSEIT effort provides leading edge SE&I for the Space Force's Space System Command. We support the Space Force's acquisition of state-of-the-art MILSATCOM systems, providing secure global, survivable, and protected communications for our nation's warfighters. We seek technical individuals who will thrive in a highly collaborative work environment of small teams, using the most modern tools and methodologies to tackle the challenges of integrating complex space and ground communications systems. You will join the Systems Integration team within the broader Systems Engineering team defining the next generation of space...

Description Position Summary: The RF Payload Engineer will support advanced space systems with a focus on RF payload development, integration, and production testing. This role contributes to the development, verification, and sustainment of RF payload hardware for space-based intelligence, surveillance, reconnaissance (ISR), and communications missions. Key Responsibilities • Lead and execute RF payload development including architecture definition, component selection, and subsystem integration. • Develop and implement production-level RF payload testing including functional, performance, and environmental test plans. • Perform RF link analysis, payload signal chain validation, and troubleshooting at system and component levels. • Collaborate with multi-disciplinary teams on payload interfaces and mission requirements. • Support hardware manufacturing readiness, test procedure development, and flight certification processes. • Generate engineering documentation,...

Description Position Summary The Principal Integration Engineer - Payload leads end-to-end integration of advanced radar and ISR payloads into spacecraft bus architectures. This role requires radar payload integration experience and supports complex interface, verification, and mission integration activities for national security space programs. Key Responsibilities • Lead integration of radar and ISR payloads with spacecraft bus subsystems across electrical, mechanical, thermal, RF, and command/data interfaces. • Develop and manage payload-to-bus interface control documents (ICDs) and verification artifacts. • Execute system-level functional integration, hardware bring-up, and payload performance testing. • Coordinate with systems engineering, RF payload, radar design, and MBSE/digital engineering teams. • Drive integration readiness events including interface reviews, IRRs, environmental test plans, and launch readiness activities. • Perform integration risk...

Description SAIC is seeking an SCA Drafter/CAD Operator II to support the US Navy in Crane, IN. JOB DESCRIPTION: This position will provide drafting and documentation support for NSWC Crane. In this role you will support a team creating/updating Technical Data Packages using SolidWorks 3D parametric Software. JOB DUTIES: Creates and modifies detailed models and drawings using SolidWorks and other 3D parametric CAD Software(s) Works closely with the Customer, Engineers, Technicians and other CAD Operators to capture design Works independently as well as in a collective team effort to effect changes to design and/or documentation Performs a variety of moderate and complex tasks and have the ability to use a variety of tools to include, but not limited to, Calipers, Gauges, Tape Measure, Ruler and other mechanical devices to aid in design development and verification/validation of first article pieces Qualifications Required Education and...

Description SAIC is seaking a CAD Operator IV to work with our team at Crane NSWC, in Crane, IN. This position will provide drafting and documentation support for NSWC Crane. In this role you will support a team creating/updating Technical Data Package(s) using Solid Edge 3D parametric Software. Able to understand, preform and to be able to be trained quickly and efficiently to the processes and procedures that are required. JOB DUTIES: Create and modify detailed models and drawings using SolidWorks and occasional other forms of CAD Software. Works closely with the Customer, Engineers, Technicians and other CAD Operators to capture design, revise existing documentation and attend meetings. Works independently as well as in a collective team effort to effect changes to design and/or documentation. Able to delegate tasking and advice to other team members while maintaining quick decision making under pressure. Able to keep Configuration Management of the...

Description SAIC is currently seeking an Engineering Tech IV to provide drafting and documentation support for NSWC Crane. In this role, you will work closely with engineers, drafters and technicians, contributing to the creation and updating of Technical Data Packages. The position requires experience with Creo and SolidWorks 3D parametric software, as well as Windchill, or a willingness to quickly learn these tools. Success in this role depends on technical proficiency and the ability to understand and efficiently execute relevant processes and procedures. If you are adaptable and thrive in a dynamic environment, this could be an excellent opportunity for you. The team is committed to providing training and support to ensure your success. Job Description Roles & Responsibilities: Creates and modifies detailed models and drawings using Creo and occasional other forms of CAD Software. Works closely with the Customer, Engineers, Technicians and...

Description SAIC is seeking an Engineering Technician in Middletown, RI . In this role, you fabricate, update, qualify, and troubleshoot electronic, electro-mechanical systems including constructing cable and harnesses. To perform these tasks, you will work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform duties. You will work with engineers and customers to resolve technical issues that arise and to qualify systems. You will be responsible for marking up and documenting changes as well as clarifying methods and processes to perform tasks to supply engineer documentation. Applicants should have experience of performing required tasks in similar product environment. JOB DUTIES : Fabricate electronic / electro-mechanical test equipment. Fabricate wire cables and harnesses Inspect, test, and perform qualification processes for systems and sub-assemblies. Troubleshoot technical issues to functionality and...

Description SAIC is hiring a Software Tester located in Pensacola, FL . This position will be supporting Training & Education Management Systems for Naval Education and Training Command (NETC). The role will support our Programs of Record; Corporate Enterprise Training Activity Resource Systems (CeTARS) for both schoolhouse & corporate, Navy & Joint MyEducation (MyED), Naval Education and Training Future Officer and Citizenship User System (NETFOCUS), Navy Inspector General Hotline Tracking System (NIGHTS), Navy Enlisted Advancement System (NEAS), Authoring Instructional Materials (AIM), and Learning Assessment System (LAS). As a software tester, you'll evaluate and verify that software applications function as intended by identifying, reporting, and helping to resolve defects, ensuring the quality, reliability, and performance of the software. The Software Tester will require: Advocate for and implement continuous improvement in testing processes, tools,...

Description SAIC is seeking a Draftsman to provide drafting and documentation support for NSWC Crane. In this role you will support a team creating/updating Technical Data Package(s) using Creo, SolidWorks 3D parametric Software and Windchill. Be able to understand, preform and be able to be trained quickly and efficiently to the processes and procedures that are required. JOB DUTIES: Creates and modifies detailed models and drawings using SolidWorks and occasional other forms of CAD Software. Works closely with the Customer, Engineers, Technicians and other CAD Operators to capture design, revise existing documentation and attend meetings. Works independently as well as in a collective team effort to effect changes to design and/or documentation Able to delegate tasking and advice to other team members while maintaining quick decision making under pressure. Able to keep Configuration Management of the tasking, files and correspondences as required to complete...