22 senior engineer jobs found

Description SAIC has an immediate need for a Senior Electrical Engineer supporting a team providing hardware and software development solutions to the CCDC Aviation & Missile Center S3I located in Huntsville, AL. The U.S. Army Combat Capabilities Development Command (CCDC) Aviation & Missile Center Systems Simulation Software & Integration (S3I) Directorate, SAIC develops and integrates advanced technologies during the entire life cycle of fielded Army aviation and missile systems. Representative examples include air and ballistic missile defense, fire support, close combat, manned and unmanned aviation, command, control and communications; interoperability, intelligence/surveillance, and automatic test equipment. Duties: Identifying and managing electrical/electronic hardware requirements. Performing circuit design, analysis, simulation and component selection for high availability, high reliability and low Size, Weight and Power (SWAP)...

Clearance Requirement: Active Secret Clearance is required to start Travel Requirements: Occasional Location: Norfolk, VA Mission Out at sea, there's no margin for failure. Naval systems must operate reliably in extreme conditions, constant vibration, high heat, saltwater corrosion, and continuous operational demand. The hardware that supports these missions must be engineered not just to function, but to endure. At WR, we design and deliver the mechanical and electrical systems that protect, support, and enable critical naval technologies. From concept through deployment, our work ensures that mission-critical equipment performs exactly as expected, when it matters most. Summary WR has a need for a Senior Electrical Engineer to lead the design, development, and integration of advanced naval electronic systems, ensuring mission-critical performance, durability, and operational reliability in maritime environments. What You'll Do • Using considerable experience...

Everforth ECS is seeking a Senior Electrical Engineer to join the RPL team in Chantilly, VA . As a Senior Electrical Engineer, you will work on high performance RF systems used for Radar and Flight Termination System (FTS). Based on system requirements, you will collaborate with a multidisciplinary engineering team of RF Engineers, Mechanical Engineers, and Software Engineers, to derive solutions, perform verification testing, and troubleshoot any issues. A successful candidate will solve complex problems and complete hardware and firmware designs and perform hands on testing.

QED Systems, LLC, is currently recruiting a Senior Systems Engineer to join our team at Aberdeen Proving Ground, MD to support our C5ISR Positioning, Navigation, and Timing (PNT) Division contract. This is a Systems Engineering and Technical Advisor (SETA) position with an expectation to assume “hands-on” responsibilities for leadership, execution, and completion of projects and programs within the PNT Division portfolio. Use your experience in Radio Frequency (RF), Electrical Engineering, Systems Engineering, Communications / Signals Engineering, or Software Engineering with a background in data analysis and hardware integration to execute duties including but not limited to the following: Duties: Serve as an engineer and team member with responsibility for a portion of an S&T effort. Prepare contract documentation defining requirements, objectives to be obtained and standards of performance. Develop techniques and improve algorithms to exploit and combine...

Description SAIC is seeking a Senior Electrical Engineer to join in and support our team in Panama City Beach, Florida. JOB DESCRIPTION: You will be working in a dynamic environment at our Holley Engineering and Integration Center. You will be supporting multiple Navy projects of various scales and multiple contracts. You will hone your leadership skills and gain engineering experience rapidly. JOB DUTIES: Use your expertise to provide guidance on a variety of technical projects. Design electrical systems, control systems, equipment and packages. Capture design requirements using MBSE principles. Conduct feasibility studies and testing of new and modified designs. Direct support personnel in the preparation of detailed design, documentation, testing and prototype fabrication. Provide design information to drafting for technical documentation team. Provide direct support to the program manager on technical issues. Prepare variance documentation as required to...

Description SAIC is seeking a Senior RF Engineer to lead engineering efforts related to the design, manufacture and sustainment of US Navy Aircraft Equipment, related systems, and other military systems in support of its Indianapolis, IN facility. JOB DESCRIPTION : Tasking will include but will not be limited to leading teams in the design, development, modification, evaluation and test of a variety of electronic equipment and electrical systems. May work with radar and related RF systems, electronic warfare systems, communications equipment and systems, other receive and transmit equipment and systems, software defined radios, antennas, GPS and other guidance systems, circuitry components, analog and digital circuits and processors, control systems, acoustic systems, electro-optic systems, weapon system launch and control circuitry, and test equipment design and development. Candidate is expected to have mastery in the use and application of technical standards,...

Description SAIC has a funded need for a Senior Radar Modeling Simulation Engineer (Space Systems) to support a rapidly expanding Government Intelligence Community (IC) customer with cutting-edge programs within the National Reconnaissance Office (NRO) in Chantilly, VA. Note: The role offers a flexible work schedule, but we ask our team to be available for team meetings during core business hours (10:00 a.m. - 3:00 p.m.). Job Duties to include: Develop and maintain physics-based simulation models of RF systems for spacecraft and space domain awareness. Perform end-to-end performance modeling for satellite missions, integrating sensor, orbital, and environmental models. Conduct radio frequency and radar sensing modeling and digital signal processing of radio frequency data Use scripting languages (Python, MATLAB, or similar) to automate workflows, perform data analysis, and interface between simulation tools. Generate technical documentation, simulation reports,...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary: SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. SAIC is looking for someone to support the MK710 program here at the SAIC Middletown office. The job will entail a complex/detailed troubleshooting effort along with full redesign engineering effort. Location: The work will be at both 28 Jacome Way, Middletown, RI, and the Naval Undersea Warfare Center (NUWC) Division Newport. Work Schedules: Flexible work schedule...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary : SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. SAIC is looking for someone to support the PTF program as the local Middletown office supports automated test equipment design. The job will entail a host of different projects supporting a host of Navy Underwater technical projects. Location : The work will be at both 28 Jacome Way, Middletown, RI, and the Naval Undersea Warfare Center (NUWC) Division Newport. Work...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary: SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. SAIC is looking for someone to support the MK710 program here at the SAIC Middletown office. The job will entail a complex/detailed troubleshooting effort along with full redesign engineering effort. Location: The work will be at both 28 Jacome Way, Middletown, RI, and the Naval Undersea Warfare Center (NUWC) Division Newport. Work Schedules: Flexible work schedule...

Description SAIC is looking for Senior Principal Systems Engineer to perform a variety of engineering work in the development of an operable system capable of meeting requirements within imposed constraints including mass, cost and schedule. Designs and/or research subsystem interfaces to ensure that subsystems are integrated and work together to form a viable complete system. Performs functional analysis of a system to ensure it meets performance criteria and mission constraints and to feed the analysis results back to the subsystem development teams. Formulates, recommends, and directs operations and procedures to resolve engineering and/or technical problems regarding operations, staffing, and equipment utilization on a specific project or projects. Provides technical assistance and instruction related to design problems and the resolution of construction or operating difficulties. Conducts special studies and investigations related to project activities and recommend changes...

Description SAIC is seeking a Senior Electrical Engineer for our customer site in North Charleston, SC . Roles/Responsibilities: (include, but are not limited to) Develop a modular, power distribution architecture for distributed maritime sensors Integrate voltage-level negotiation for subsystems (similar to that of USB-C PD) Incorporate renewable energy solutions such as wave harnessing, solar, peltier into a system architecture for improved persistence Perform power budget analysis to inform power system and support sensing, communication, and edge processing operations of complex systems Develop designs for signal/power PCBs using best practices for trace routing, thermal management, signal isolation, and grounding Qualifications Required Education: Bachelor's degree and nine (9) years of experience Relevant Background/Experience: Development of DC power distribution architectures Experience programming...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary : SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. The local Middletown office supports automated test equipment design, printed circuit board design (PCB), cable design, and acoustic system design. Support can vary from Research & Development to Production Support tailoring both skills and interests of the prospective employee to fill the role. Location : Work is performed on-site work at 28 Jacome Way, Middletown, RI,...

Description Description SAIC is seeking a motivated and detail-oriented Electrical Engineer to join our team in Panama City Beach Florida. You will be working in a dynamic environment at our Holley Engineering and Integration Center supporting rapid development, prototyping, and production of cutting-edge adaptive warfare technologies. The ideal candidate will demonstrate a balance of technical expertise, problem-solving skills, and a collaborative mindset, with experience in handling mid-level engineering responsibilities. This role will support equipment design, cable design, system design, testing and troubleshooting. Support can vary from Research & Development to Production Support. The program focuses on asymmetric and adaptive warfare systems designed to provide flexible, cost-effective solutions for various asset types and modalities. It supports accelerated development and fielding of various technologies to address emergent warfighter requirements. Key...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary : SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. The local Middletown office supports automated test equipment design, printed circuit board design (PCB), cable design, and acoustic system design. Support can vary from Research & Development to Production Support tailoring both skills and interests of the prospective employee to fill the role. Location : Work is performed on-site work at 28 Jacome Way, Middletown, RI,...

Description SAIC is seeking a Defense Systems Engineer for our Crane, IN location. This is a technically challenging position requiring working with complex military systems, systems integration, network engineering, and cyber security. The successful candidate will support the customer by developing, defining and testing system requirements and analyzing computational technologies to recommend optimal hardware and software solutions for military use. Ultimately, they will translate customer needs into comprehensive technical solutions by leading various systems engineering activities. Additionally, the candidate will possess the skills listed: Abilities and Experience: Ability to integrate an Electronic Warfare (EW) system into shipboard Command and Control (C2) systems. Interface with and utilize the Consolidated Afloat Networks and Enterprise (CANES) with experience in each CANES variant. Knowledge of Cooperative Engagement Capability (CEC)...

Description SAIC is seeking an organized and motivated Junior Mechanical Engineer in Middletown, RI who will work effectively in a fast-paced environment. You will be part of a collaborative team of engineers and support technicians working to bring a variety of mechanical designs from the early concept stage all the way through fabrication. Job Duties: Design mechanical systems for underwater applications, custom data acquisition systems, and automated test hardware for land-based testing of naval systems. Create 3D models of electromechanical systems and the associated 2D fabrication drawings of all hardware. Create technical data packages for systems and control configuration management of the drawings. Work directly with vendors and manufacturers of mechanical systems and custom assemblies to ensure sufficient deliverables on time. Must demonstrate strong organizational skills and the ability to work on multiple tasks concurrently with changing deadlines and...

Description SAIC is currently seeking a mid to senior level Electrical Maintenance and Calibration Technician in Newport, RI who is looking for a growth opportunity as an electrical technician at an industrial/engineering/testing site. Job Duties : The candidate will work within a multidisciplinary team of electrical & mechanical engineers and technicians to support the electrical maintenance, calibration, configuration, and testing of an advanced Naval Test Facility. The Propulsion Test Facility (PTF) specializes in the test and characterization of torpedo mechanical systems including propulsion, combustion, pumps and control systems. The candidate will become an expert in all of the electrical measurement and control systems within the facility including National Instruments based data acquisition and control systems, thermal, pressure, and flow sensors, motorized valve and control systems, and PID control systems. The candidate must be self-motivated,...

Description SAIC is a premier Fortune 500 technology integrator driving our nation's technology transformation. Our robust portfolio of offerings across the defense, space, civilian and intelligence markets include secure high-end solutions in engineering, digital, artificial intelligence and mission solutions. Using our expertise and understanding of existing and emerging technologies, we integrate the best components from our own portfolio and our partner ecosystem to deliver innovative, effective and efficient solutions that are critical to achieving our customers' missions SAIC is looking for systems engineering analytic support for a highly dynamic and growing program with one of our US Government customers. You will be a part of a large multi-year contract that supports our customer in systems engineering and integration across a broad portfolio of projects. You will come into a program that enjoys a close working relationship with the customer, bringing exquisite...

Description SAIC is seeking an experienced Electrical Systems Engineer to join our elite Systems Engineering and Technical Assistance (SETA) team supporting cutting-edge national security programs. In this role, you'll contribute to the development of advanced remote sensing technologies, sensor systems, and space vehicle architectures that directly impact mission-critical operations. This is an opportunity to tackle complex technical challenges while working alongside world-class engineers on multiple high-priority, fast-paced projects. Roles and Responsibilities: As a SETA, you will provide expert technical guidance and oversight to ensure program success across the full system lifecycle: Provide technical insight to the next generation electronics and sensor development Review and assess development contractor deliverables including requirements flow-down, verification methodologies, calibration plans, interface control documents, concepts of operations, and test...