12 construction jobs found

Position: Hardware Engineer (Einfochips Inc) Job Description: What You'll Be Doing: Experience designing boards with microprocessors (Iike iMX8, iMX9) and microcontroller (ESP32, STM32) is essential. Good understanding of Display inerfases MIPI DSI,  Parallel Bus, LVDS, HDMI Camera interfaces , CSI, USB Schematics, Layouts – Uage of tools Altium, Cadence Toruble shooting the hardware boards Good understanding of Lab tests EMI/EMC Good understanding of certifications and regulatory requirements (UL/FCC) Cost estimations/Component selection/BOM creations Supplier interaction Electronics Design & Development, select components and design schematics, collaborate with customer on component placement and PCB size. Do layout design and high-speed interface guidelines, perform signal integrity, power integrity, and thermal analysis and review Gerber files. Testing Design sensor boards (Motion, Light, Accelerometer, Temperature,...

Position Summary Odyssey has an exciting opportunity for a Systems Integration and Test Engineer (SE‑3) supporting the 46 Test Squadron / TGBC at Eglin AFB, FL under the TMAS III contract.   The Datalinks Test Flight is seeking a degreed computer scientist or engineer with software development/scripting knowledge and work experience to support the design, construction, integration, and sustainment of Test & Evaluation (T&E) systems in the Advanced Datalinks Test Lab (ADTL). The environment is fast‑paced and centers on innovative digital communications technologies, offering both on‑the‑job training and formal technical coursework. Candidates should have strong technical foundations with motivation to expand into additional required domains. Responsibilities may range from supporting project leads to leading efforts as experience progresses.   This is a full‑time, onsite position at Eglin AFB, FL. Limited telework may be authorized based on...

Position: Hardware Engineer Job Description: What You'll Be Doing: Gather requirements and finalize the architecture for the next-gen HMI module based on various SoCs including Qualcomm and NXP, Reneses, ESP Electronics Design & Development, select components and design schematics, collaborate with customer on component placement and PCB size. Do layout design and high-speed interface guidelines, perform signal integrity, power integrity, and thermal analysis and review Gerber files. Testing Design sensor boards (Motion, Light, Accelerometer, Temperature, Gyroscope, Magnetometer, calibrate sensors) and integrate with HMI Module. Protocol experience in SPI, I2C, Serial, UART, USB, DSI, CSI Coordinate with fabrication, assembly, and integration teams, conduct bring-up, functional, EDVT, thermal, and performance testing. What We Are Looking For: Experience / Education Typically requires a 4 year degree in   electrical/electronics   and a minimum of 8...

Description: Join Our Team as an Electronics Engineer where you will work on the development of a sophisticated state-of-the-art avionics product in a world class Integrated Product Development environment. Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Courtland AL and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and seeking an RF Design Engineer at Lockheed Martin's Andover, MA facility. We offer an excellent working environment with a mix of cutting-edge design and genuine hands-on electronics laboratory testing and product development. This exciting RF position provides an opportunity to be a key contributor on our team of industry-leading RF design experts. What You Will Be Doing In this role, the Senior Staff RF Engineer will lead the development and production of complex multi-function modules used in challenging high reliability applications in all phases of the product life...

Description: Join Our Team as an Avionics Electronics Engineer where you will work on developing the new Long Range Hypersonic Weapon (LRHW), leveraging our decades of hypersonic experience and expertise. Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Huntsville AL and be expected to work a flexible 9x80 schedule in the office full-time. Ready for a challenge at the speed of Hypersonic? Come join Lockheed Martin's Long Range Hypersonic Weapon team. Our system will travel at Mach 5 (over a mile per second)! Helping us create a system that goes that fast means overcoming several difficult physics and engineering challenges. You will be integrating hypersonic missile technology into an Army battery on a highly accelerated schedule to deliver a hypersonic operational prototype system to the Soldier. What does this role look like? The role focuses on designing and developing electrical interfaces...

Basic Qualifications Bachelor's degree in Systems Engineering, or a related Science, Engineering or Mathematics field, plus a minimum of 2 years of relevant experience; or Master's degree, plus 6 months of relevant experience.   CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES:   As a Shipyard Installation and Test Engineer for GDMS Field Engineering, you’ll be a member of a cross functional team responsible for supporting the construction and integration of the COLUMBIA Class ballistic missile submarines. This position is...

Description: You will be the Harness Design Engineer for the Advanced Development Programs (ADP) team which is responsible for developing cutting‑edge aircraft harness and interconnect solutions. What You Will Be Doing As the Harness Design Engineer you will be responsible for translating electrical specifications into robust wiring harness designs, creating detailed routing diagrams, and ensuring integration across mechanical and structural domains. Your responsibilities will include: Produce electrical wiring schematic drawings and design intricate power distribution systems. Gather and validate specifications, generate routing diagrams, cable layouts, and installation procedures. Coordinate with mechanical, structural, and integration teams to resolve clashes and meet safety and compliance standards. Create and maintain documentation such as routing drawings, installation guides, and change‑request tracking. Develop supplier statements of work, oversee...

Description: You will be the Electrical Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team delivers precision engagement aerospace and defense systems, designing, building and fielding the electrical hardware that powers missiles, sensors and other mission critical subsystems for the United States and allied militaries. What You Will Be Doing As the Electrical Engineer you will drive the design, analysis, integration and test of circuit card assemblies (CCAs) and related electrical subsystems. You will work side by side with systems, software, manufacturing and quality partners, providing hands on laboratory support and production assistance to keep programs on schedule, on budget and fully compliant with defense standards. Your responsibilities will include • Design and analyze CCAs, performing schematic capture, PCB layout and integration with system level architectures. • Conduct electrical testing, troubleshooting and...

Description: Perform visual inspection and testing operations on aircraft electrical and electronic systems. Follow general instructions, standard inspection procedures, engineering drawings, engineering specifications, check sheets, and other written or oral instructions to perform standard electrical inspection and testing operations. Utilize Electronic Operation Sheet System (Solumina) for accountability of all assembly/inspection operations and test requirements. Inspect systems and components for physical conditions, proper identification, completion and installation of all parts and assemblies, satisfactory workmanship. Check for broken strands in wiring, sufficient strain relief, proper mechanical connection, identification, and condition of plugs, wiring, and insulation. Conduct high potential and insulation resistance test on fuel gage wiring antenna cables, as occasion requires. Document Non-Conformances utilizing Electronic Documentation System (Solumina) on...

Description: Space is a critical domain, connecting our technologies, our security, and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire, and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. Lockheed Martin Space, Specialty Engineering, is seeking an Electrical Component...

Position Summary Odyssey has an exciting opportunity for a Systems Integration and Test Engineer (SE‑2) supporting the 46 Test Squadron / TGBC at Eglin AFB, FL under the TMAS III contract.   The Datalinks Test Flight is seeking a degreed computer scientist or engineer with foundational knowledge in software development/scripting and hands‑on interest in designing, constructing, integrating, and supporting test and evaluation (T&E) systems within the Advanced Datalinks Test Lab (ADTL). This role is ideal for individuals who thrive in fast‑paced environments, enjoy innovative digital communication technologies, and are eager to learn across multiple technical domains.   Position responsibilities range from supporting project team leads to potentially leading project efforts as experience is gained. This is an onsite position.   This is a full‑time position at Eglin Air Force Base, Florida, with travel up to 25% CONUS/OCONUS....