23 electrical engineer sr jobs found

Description: You will be the Electrical Engineer Sr. Stf, Simulation for the Simulation Engineering team which is responsible for designing, developing, and testing hardware simulation components (avionic/network test racks, cockpits, audio/visual systems, etc.). What You Will Be Doing As the Electrical Engineer Sr. Stf, Simulation you will be responsible for designing, developing, and integrating hardware systems that enable laboratory testing across multiple aircraft programs. Your responsibilities will include: Design and develop electrical hardware solutions for ADP, C‑5, C‑130J, F‑35 and F‑22 test venues. Integrate hardware into simulation platforms and ensure compliance with design criteria. Collaborate with external customers to capture and translate laboratory product requirements. Perform testing, troubleshooting, and validation of hardware in lab environments. Document designs, analyses, and test results in accordance with engineering...

Description: What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. The Work We are seeking an experienced Electrical Engineer, Sr to support multiple programs in the Integrated Warfare Systems & Sensors business. This position requires knowledge of electrical engineering principles, working in a team environment, and general knowledge of other related disciplines. Specific tasking will be but not limited to overall design of launcher electrical systems, including the selection and use of Commercial Off the Shelf components, custom hardware design, and setting requirements for chassis/enclosure design. Responsibilities include: • Support the electrical design sustainment of the MK41 Vertical Launching System and new and exciting designs of the next...

Description: You will be the Electrical Engineer for the Santa Barbara Focal plane Infrared Sensors team at Lockheed Martin Missiles & Fire Control. Our team designs, develops, integrates and verifies infrared (IR) electronics that power missile control and aerospace test flight equipment for U.S. and allied customers. What You Will Be Doing As the Electrical Engineer you will apply proven analog and mixed signal principles to create flight qualified IR electronics while supporting system level integration and test. You will partner with optics, systems, test and mechanical engineers to deliver reliable hardware that meets stringent program requirements and quality standards. Your responsibilities will include: • Designing and analyzing analog and mixed signal circuits that support IR sensors and related hardware. • Developing flight qualified and test electronics, including sensor interfaces, signal conditioning, timing/control logic, data acquisition and power delivery...

Basic Qualifications Bachelor’s degree in Electrical Engineering, or a related Science, Engineering or Mathematics field, plus a minimum of 8 years of relevant experience; or Master's degree plus a minimum of 6 years of relevant experience.   CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As an electrical engineer for GDMS Progeny Systems Electronic Warfare group, you’ll be a member of or lead a cross functional team responsible for development of mission critical defense systems. The ideal candidate will have deep expertise in...

Basic Qualifications Requires a Bachelor’s degree in Electrical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 8+ years of job-related experience, or a Master's degree plus 6 years of job-related experience.     CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position General Dynamics Mission Systems is looking for a Lead Electrical Engineer for our Progeny Systems Business Area.  As a lead member of a cross functional team, you will play a pivotal role in the design, development and maintenance of electronics for advanced acoustic systems, including active...

Basic Qualifications Requires a Bachelor’s degree in Electrical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 8+ years of job-related experience, or a Master's degree plus 6 years of job-related experience.     CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As an electrical engineer for Bluefin Robotics, you’ll be a member of a cross functional team responsible for the design and development of subsea AUV systems. We encourage you to apply if you have any of these preferred...

Basic Qualifications Requires a Bachelor’s degree in Electrical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 8+ years of job-related experience, or a Master's degree plus 6 years of job-related experience.     CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As a Senior Electrical Engineer, you’ll be a member of a cross functional team responsible for hardware design from requirements analysis through schematic capture, managing of layout constraints, supporting PWB layout, manufacturing, and integration &...

Description: You will be the Systems Engineer Sr. Integration and Test for the Architecture, Design, Integration & Test (ADIT) team within the Systems Integration & Test (SI&T) which is responsible for … What You Will Be Doing As the Systems Engineer Sr. Integration and Test you will be responsible for leading system‑level software testing initiatives, crafting test strategies, and ensuring integration quality across complex platforms. "Your responsibilities will include:" Develop and execute comprehensive test plans and procedures for system‑level software. Analyze test data, identify defects, and drive corrective actions. Collaborate with architects, designers, and developers to validate integration requirements. Maintain test environments and tools to support continuous testing. Provide clear reporting and recommendations to stakeholders on test outcomes. What’s In It For You "We are committed to supporting your work‑life...

Description: You will be the Systems Engineer Sr. Integration and Test for the Architecture, Design, Integration & Test (ADIT) team within the Systems Integration & Test (SI&T) which is responsible for … What You Will Be Doing As the Systems Engineer Sr. Integration and Test you will be responsible for leading system‑level software testing initiatives, crafting test strategies, and ensuring integration quality across complex platforms. "Your responsibilities will include:" Develop and execute comprehensive test plans and procedures for system‑level software. Analyze test data, identify defects, and drive corrective actions. Collaborate with architects, designers, and developers to validate integration requirements. Maintain test environments and tools to support continuous testing. Provide clear reporting and recommendations to stakeholders on test outcomes. What’s In It For You "We are committed to supporting your work‑life...

Basic Qualifications Requires a Bachelor’s degree in Systems Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 8+ years of job-related experience, or a Master's degree plus 6 years of job-related experience. Agile experience preferred. .   CLEARANCE REQUIREMENTS:  Department of Defense TS/SCI security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position GDMS Sr. Advanced Systems Engineers analyze, design, develop and test GDMS systems to ensure the integration of software, hardware, reliability, maintainability, safety and other requirements in the total engineering effort.   Responsibilities include...

Basic Qualifications Requires a Bachelor’s degree in Systems Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 8+ years of job-related experience, or a Master's degree plus 6 years of job-related experience. Agile experience preferred.   CLEARANCE REQUIREMENTS:  Department of Defense TS/SCI security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position GDMS Sr. Advanced Systems Engineers analyze, design, develop and test GDMS systems to ensure the integration of software, hardware, reliability, maintainability, safety and other requirements in the total engineering effort.   Responsibilities include...

Description: You will be the Low Observables Engineer Sr for the Low Observables team (Signature Management & Survivability) which is responsible for advancing stealth signature reduction and survivability technologies. What You Will Be Doing As the Low Observables Engineer Sr you will be responsible for leading the full lifecycle of low‑observable technology development—from concept and modeling through prototype testing and transition to production. Your responsibilities will include: Performing, analyzing, and communicating vehicle signature predictions using Unix‑based tools. Leading trade‑study and optimization campaigns for platform‑level and component‑level stealth designs. Planning and executing laboratory measurements of material coupons to capture physical and electromagnetic properties. Developing and applying advanced electromagnetic metamaterials for low‑observable platforms. Authoring technical reports and briefings for internal...

Description: You will be the Low Observables Engineer Sr Staff for the Low Observables (Signature Management & Survivability) team which is responsible for advancing stealth and survivability technologies. What You Will Be Doing As the Low Observables Engineer Sr Staff you will be responsible for leading the end‑to‑end maturation of low observable technologies from concept through production. You will drive technical strategy, coordinate multidisciplinary efforts, and represent the team to senior leadership and government forums. Your responsibilities will include: Perform, analyze, and communicate vehicle signature predictions using Unix‑based codes and tools. Lead signature‑reduction trade studies and optimization campaigns for platform‑level and component‑level designs. Plan and execute laboratory measurements of material coupons to determine physical, electrical, and environmental properties. Develop and test advanced electromagnetic...

Description: You will be the Systems Engineer Sr for the for the Architecture, Design, Integration & Test (ADIT) team within the Systems Integration & Test (SI&T). Our team is responsible for systems level software testing. What You Will Be Doing As the Systems Engineer for the for the Architecture, Design, Integration & Test (ADIT) team you will perform technical test planning and execution. Responsibilities will include: • Generation of test plan and test procedure documentation • Coordination of test objectives • Execution across agile development teams. The 5th Gen Platforms SI&T team performs mission system capability integration and maturation, verification and validation testing and regression testing for F-35. Testing is generally at the system level and performed in hardware in the loop venues as well as software development labs executing both manual and automated testing. Integration and test will sometimes require candidates to work...

Description: What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. The Work We are seeking a Sr. Mechanical Engineer to join the Mechanical Antenna Design group in the Sensor Mechanical Design Center. In this role, the selected candidate will work as part of an engineering team to responsible for the design, analysis, verification, and production support of mechanical structures, enclosures, and electronic modules for multiple programs across the RMS Line of Business. This candidate will interface with Systems, Electrical Engineers, Drafting and Operations personnel in the development of detailed designs and assembly strategies. The selected candidate will work closely with cross-functional teams in the design, development, integration, and testing and...

Basic Qualifications Requires a Bachelor’s degree in Systems Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 8+ years of job-related experience, or a Master's degree plus 6 years of job-related experience. Agile experience preferred.   CLEARANCE REQUIREMENTS: Department of Defense TS/SCI security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required.   Responsibilities for this Position GDMS Sr. Advanced Systems Engineers analyze, design, develop and test GDMS systems to ensure the integration of software, hardware, reliability, maintainability, safety and other requirements in the total engineering effort.   Responsibilities include...

Basic Qualifications Requires a Bachelor’s degree in Systems Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 8+ years of job-related experience, or a Master's degree plus 6 years of job-related experience. Agile experience preferred.   CLEARANCE REQUIREMENTS:  Department of Defense TS/SCI security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position GDMS Sr. Advanced Systems Engineers analyze, design, develop and test GDMS systems to ensure the integration of software, hardware, reliability, maintainability, safety and other requirements in the total engineering effort.   Responsibilities include...

Basic Qualifications Requires a Bachelor’s degree in Electrical or Computer Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 8+ years of job-related experience, or a Master's degree plus 6 years of job-related experience. Agile experience preferred.   Clearance Requirements: Department of Defense TS/SCI security clearance is preferred at time of hire. Candidates must be able to obtain a TS/SCI clearance within a reasonable amount of time from date of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position   Primary Job Qualifications: We encourage you to apply if you have any of these preferred skills or experiences: In-depth experience using RTL...

Basic Qualifications Requires a Bachelor’s degree in Electrical or Computer Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 8+ years of job-related experience, or a Master's degree plus 6 years of job-related experience. Agile experience preferred.   Clearance Requirements: Department of Defense TS/SCI security clearance is preferred at time of hire. Candidates must be able to obtain a TS/SCI clearance within a reasonable amount of time from date of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Duties and Tasks: • Responsible for definition, design, verification and documentation for ASIC (Application Specific Integrated Circuit) and/or...

Description: What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. The Work We are seeking a Sr. Mechanical Engineer to join the RF & Microwave Packaging & Analysis group in the Sensor Mechanical Design Center. In this role, the selected candidate will work as part of an engineering team to develop electro-mechanical packaging concepts for elements of large scale radars or airborne systems. This candidate will interface with Systems, Electrical Engineers, Drafting and Operations personnel in the development of detailed packaging designs and assembly strategies. The candidate will also work on advanced microelectronics technologies in support of low-SWaP (Size Weight, and Power) solutions to meet Lockheed Martin sensor and mission needs. The...