96 senior test engineer jobs found

Basic Qualifications Requires a Bachelor’s degree in Electrical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.     CLEARANCE REQUIREMENTS: Department of Defense TS/SCI security clearance is preferred at time of hire. Candidates must be able to obtain a TS/SCI clearance within a reasonable amount of time from date of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As a Systems Integration and Test Engineer for the General Dynamics Space Avionics and Payloads team, you’ll be a key element of the integration and...

Basic Qualifications Requires a Bachelor’s degree in Electrical Engineering, or a related Science, Engineering or Mathematics field.    CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Key Responsibilities: Support design and analysis of AC-DC and DC-DC power systems under guidance of senior engineers Assist with integration, testing, and troubleshooting of electrical hardware Develop test procedures and documentation for power electronics validation Perform component research and support trade studies for power system solutions Design cable assemblies and support PCB development efforts...

Basic Qualifications Requires a Bachelor’s degree in Systems Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 8+ years of job-related experience, or a Master's degree plus 6 years of job-related experience. Agile experience preferred.     CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is ontainable within a reasonable time from hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Duties and Responsibilities Coordinates requirements development, hardware/software design, verification, and validation activities Manages technical deliverables and coordinates technical review boards to review decisions with broad program...

Description: WHAT WE'RE DOING Provide technical support for Radar and/or Sonar Programs focusing on power‑supply design and power‑subsystem engineering. The role drives reliable, high‑performance power solutions that enable mission‑critical sensor systems. THE WORK Design, analyze, and simulate power‑supply circuits, distribution networks, and power‑conversion topologies to meet system requirements. Perform root‑cause investigations and develop corrective‑action plans for power‑related issues. Build and refine engineering procedures, seeking continuous‑improvement opportunities and greater efficiency. Mentor junior engineers, sharing expertise in power‑electronics best practices and troubleshooting techniques. Collaborate closely with senior engineers, subject‑matter experts, and cross‑program teams to integrate power solutions into radar/sonar platforms. WHO WE ARE Lockheed Martin is an equal‑opportunity employer that values diversity, integrity, and innovation. Our culture is...

Description: What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. The Work We are seeking an experienced Electrical Engineer, Sr to support multiple programs in the Integrated Warfare Systems & Sensors business. This position requires knowledge of electrical engineering principles, working in a team environment, and general knowledge of other related disciplines. Specific tasking will be but not limited to overall design of launcher electrical systems, including the selection and use of Commercial Off the Shelf components, custom hardware design, and setting requirements for chassis/enclosure design. Responsibilities include: • Support the electrical design sustainment of the MK41 Vertical Launching System and new and exciting designs of the next...

Description: About Us At Lockheed Martin Rotary and Mission Systems (RMS), we're driving innovation and upholding integrity in all that we do. Our mission is to push the boundaries of technology and pioneer groundbreaking solutions. By applying the highest standards of business ethics and visionary thinking, we believe that everything is within our reach. The Work Our Radar Systems Engineering team is seeking a candidate to support the integration, test, and verification of high performance Active Electronically Scanned Array (AESA) radar systems. The Radar Systems Engineer will: • Apply advanced technologies, scientific principles, theories and concepts to develop revolutionary system solutions. • Support integration and test, evaluate test results, investigate discrepancies, provide technical assessment of anomalies, and drive issues to resolution. • Conduct system verification and support certification activities. • Collaborate across multidisciplinary teams to accomplish...

Description: Space is a critical domain, connecting our technologies, our security, and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire, and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. Lockheed Martin Space is seeking a Senior RF Engineer to join our team in Littleton,...

Description: You will be the Defensive Systems Engineer - Level 2 for the AMMM Communication, Navigation and Sensors team which is responsible for the design, development, testing and production of avionic systems across all AMMM aircraft platforms. What You Will Be Doing As the Defensive Systems Engineer - Level 4 you will be responsible for leading technical efforts that span defensive and sensor systems, while driving integration and sustainment across the Marietta site. Your responsibilities will include: Define and translate customer requirements into system‑level and equipment‑level specifications, including occasional travel to customer sites once per month. Plan, execute, and oversee test campaigns at both equipment and aircraft levels, delivering reliable results on schedule. Develop proposals, task descriptions, effort estimates, and supporting documentation for new and sustainment projects. Coordinate with senior leadership, suppliers, and...

Description: You will be the ARRW Mechanical Design Engineer Staff for the Missiles & Fire Control – ARRW Program. Our team is developing the first hypersonic missile to enter low rate production. What You Will Be Doing As the Mechanical Engineer for the Booster/All Up Round (AUR) you will be the primary mechanical engineering point of contact for ARRW LRIP and ARRW Incremental development. You will work closely with Glider mechanical engineering, AUR electrical engineering, and systems engineering to translate requirements into releasable technical data packages (TDPs). Your responsibilities will include: • Developing and generating CREO layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles • Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM • Coordinating the IPT team, suppliers, GSC, electronic packaging, optics, and structural/thermal/material analysts to ensure design...

Description: You will be the Senior Circuit Design Engineer for the Command Launch Assembly (CLA) Carrier Card Assembly (CCA) team within Missiles & Fire Control (MFC). Our team delivers the high performance electronic hardware that powers the Next Generation Short Range Interceptor (NGSRI) and other precision engagement systems for the United States and allied forces. What You Will Be Doing As the Senior Circuit Design Engineer you will own the end to end design of the CCA, translating system requirements into reliable, production ready circuit cards that power, communicate with, and integrate into the launcher’s subsystems. You will work hand in hand with mechanical, electrical, and systems engineers, perform verification and validation, and ensure every design meets rigorous power conditioning, signal integrity, and environmental standards. Your responsibilities will include: • Defining performance, power, and interface requirements for the CCA and documenting them in...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Programmable Logic Design team supporting the Next Generation Short Range Interceptor (NGSRI). Our team creates the digital heart beats—ASICs and FPGAs—that enable precision engagement aerospace and defense systems for the United States and allied forces. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will own the architecture, development, verification, and delivery of the Datalink FPGA that powers the NGSRI. You’ll translate system level performance, safety, and reliability goals into robust, production ready logic while mentoring junior talent and collaborating across disciplines. Your responsibilities will include: • Defining architecture and design specifications for programmable logic components; writing clean, well documented RTL in VHDL/Verilog/SystemVerilog. • Developing synthesis, place and route, and timing closure strategies to achieve deterministic operation on...

Description: You will be the Circuit Design Engineer Senior for the Laser Weapon System (LWS) Turret Control team. Our team develops the high precision control circuit assemblies that drive the turret closing motor loops for next generation directed energy weapons, ensuring reliable, rapid target acquisition and engagement. What You Will Be Doing As the Circuit Design Engineer Senior you will own the end to end development of the control circuit hardware—from initial concept through detailed design, simulation, verification, fabrication support and system integration. You will work closely with servo specialists, subject matter experts, mechanical packaging engineers and external vendors to deliver a robust, high performance, producible CCA that meets stringent laser weapon requirements. Your responsibilities will include: • Own the full product lifecycle for control circuit assemblies (CCA) • Develop detailed schematics and PCB layouts using industry standard tools. •...

Description: Space is a critical domain, connecting our technologies, our security, and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire, and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you Come join the Lockheed Martin Space Radio Frequency (RF) Talent Center (RFTC) team in...

Basic Qualifications Bachelor's degree in Mechanical Engineering, or a related Science, Engineering or Mathematics field, plus a minimum of 2 years of relevant experience; or Master's degree, plus 6 months relevant experience.   CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As a senior mechanical engineer for regional strike, you'll be a member of a cross functional team working on projects that support some of our nations fundamental defense services. GDMS employees work closely with esteemed customers to develop solutions that...

Description: You will be the Systems Integration & Test Engineer Sr for the Architecture, Design, Integration & Test (ADIT) – F-35 Sensor Systems Integration & Test (SI&T) team which is responsible for mission system capability integration & maturation, verification testing and regression testing for all F-35 modernization efforts. What You Will Be Doing As the Systems Integration & Test Engineer Sr you will be responsible for technical test planning and execution of the F‑35 Sensor Suite, including Radar, Electronic Warfare (EW), Countermeasures (CM), Electro‑Optical (EO)sensors and Fusion. You will ensure the SI&T process follows prescribed engineering standards and continuously improves those processes. Your responsibilities will include: Generate test plans and detailed test procedure documentation. Coordinate test objectives and execute testing across agile development teams. Conduct system‑level testing in...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. Lockheed Martin Space is seeking a Senior Staff Electro-Optical Engineer to join the...

Description: Join Our Team as an Electronics Engineer where you will develop sophisticated electronics products in a world class Integrated Product Team. Location: This position does not support teleworking ; the selected candidate will be located near our Lockheed Martin Space facility in: King of Prussia PA and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision....

Description: You will be the Senior ElectroMechanical Engineer on the Advanced Programs hardware engineering team within Lockheed Martin Missiles & Fire Control (MFC). Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries. You’ll work on cutting edge electronics packaging, hands on prototype builds, production support, and technical leadership that directly impact next generation missile and radar programs. What You Will Be Doing As the Senior ElectroMechanical Engineer you will act as a key technical contributor on one or more defense programs, guiding hardware from concept through low rate production and full rate manufacturing. You’ll lead cross functional teams, create detailed electromechanical models and drawings, define test criteria, and drive issue resolution while mentoring junior engineers and championing an inclusive, collaborative culture. Your responsibilities will include: • Lead...

Description: You will be the Analog and Power Circuit Design Engineer for the Lockheed Martin Missiles & Fire Control – RF Sub Assemblies team. Our team creates high performance digital, RF, and microwave sub assemblies, delivering reliable hardware that meets the toughest size, weight, power, and security requirements. What You Will Be Doing As the Analog and Power Circuit Design Engineer you will turn challenging concepts into trustworthy analog and power supply hardware, partnering with digital RF experts and cross functional groups to deliver end to end solutions. Your responsibilities will include: • Assisting senior subject matter experts while learning and applying design, simulation, and test techniques for low noise analog RF circuits, DC DC converters, and LDO regulators. • Designing and developing RF analog circuitry for high frequency, low noise applications, including low noise amplifiers, mixers, and filter networks. • Creating, simulating, and optimizing...

Basic Qualifications Requires a Bachelor’s degree in Electrical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.     CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. T his position is Hybrid/Flex with a minimum of 3 days per week on-site. Responsibilities for this Position As an Advanced Electrical Engineer, you will be a key member of a cross-functional team responsible for the full lifecycle of complex hardware systems, from initial concepts through...