13 jobs found in Chelmsford, MA

Description: We are looking for a Senior Staff Electronics Engineer to support digital electronics common products and knowledge base development. In this role, you will have the following responsibilities: • Reviewing design requirements • Creating block diagrams • Creating schematics • Creating circuit card assembly (CCA) • Working with procurement on all the parts of the bill of materials (BOM) • Supporting manufacturing of the CCA • Performing test checkout of the CCA by creating test plans and performing board tests • Supporting program box integration • Supporting the program lifecycle, including SRR, PDR, CDR, TRR, PSR, and launch, specifically for optical payload or component builds. • Support the design of Electronic and Special Test Equipment (STE) for laser systems. • Developing and refining design standards and processes. • Training and mentoring junior engineers. Basic Qualifications: • Bachelor of Science or higher from an accredited college in Electrical...

Description: You will be the Staff Embedded Software & SDR Engineer for the Embedded Systems team. Our team is responsible for designing and delivering high‑performance microwave modules that combine advanced FPGA hardware with sophisticated embedded software. What You Will Be Doing As the Staff Embedded Software & SDR Engineer you will be responsible for creating end‑to‑end software solutions that drive the digital/processor subsystems of our multi‑function microwave modules. Your responsibilities will include, but are not limited to: Develop and maintain embedded C/C++ software that controls microwave circuits, performs message handling, and executes digital‑signal‑processing (DSP) algorithms. Define system architecture for the digital/processor sub‑systems and integrate software with FPGA designs and RF front‑ends. Collaborate with FPGA designers, technical leads, and microwave subject‑matter experts to solve complex size‑weight‑power...

Description: You will be the ElectroMechanical Engineer for the Microwave Systems Engineering Team. Our team is responsible for designing, developing, and manufacturing cutting edge microwave electronics subsystems that power next generation aerospace platforms. We blend RF/microwave, analog/digital, and mechanical thermal expertise, leveraging modern design tools, an on site state of the art electronics fab, and comprehensive ESS test capabilities. What You Will Be Doing As the ElectroMechanical Engineer you will be responsible for leading the end to end creation of complex microwave electronics packages—from concept through production. You will work side by side with a multidisciplinary group of industry leading engineers, solving challenging technical problems and driving the advancement of new aerospace products and technologies. Your responsibilities will include: • Develop detailed electro mechanical designs for microwave subsystems, integrating RF, analog/digital,...

Description: You will be the Electro Mechanical Engineer for the Microwave Electronics Subsystems Team. Our team designs, develops, and manufactures cutting edge microwave and RF subsystems for aerospace applications, leveraging modern RF/microwave, analog/digital, and mechanical/thermal tools alongside world class electronics fabrication and ESS test facilities. What You Will Be Doing As the Electro Mechanical Engineer you will be responsible for delivering innovative, multi disciplinary solutions that move concepts from design through to flight qualified hardware. You will operate at the intersection of RF, mechanical, and thermal engineering, collaborating with top tier specialists to solve complex technical challenges and advance next generation aerospace products. Your responsibilities will include: • Create and optimize electro mechanical packaging layouts for microwave components and subsystems. • Perform 3 D CAD, thermal, structural, and RF simulations to validate...

Description: You will be the Component Engineer for Lockheed Martin Missiles and Fire Control's Microwave Center of Excellence. Our team is responsible for designing, developing, and supporting Digital and RF/Microwave Products, and you will play a key role in ensuring the electrical components in the modules meet the highest reliability requirements and product life cycle requirements. What You Will Be Doing As the Component Engineer, you will be responsible for: • Researching component termination styles, plastic encapsulation styles, and component construction processes • Generating Vendor Identification Drawings, Source Control Drawings, and Altered Item Drawings • Leading component part standardization, part selection, and process change notices • Developing component qualification test plans and executing part qualifications with test houses • Developing component screenings and interfacing with customers to present part changes and impact to hardware • Leading...

Description: Join Our Team as a ASIC/FPGA Design Engineer where you will work on the development of a sophisticated state-of-the-art avionics product in a world class Integrated Product Development environment. Location: This position does not support teleworking ; the preferred candidate will be located near our Lockheed Martin Space facility one of the Coolest places to work: Cambridge MA , and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security, and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire, and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready...

Basic Qualifications Requires a Bachelor’s degree in Electrical Engineering, or a related Science, Engineering or Mathematics field.    CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required.   Responsibilities for this Position ROLE AND POSITION OBJECTIVES:   As an electrical engineer for Maritime & Strategic Systems (MSS) , you’ll be a member of a cross functional team responsible for the development and fielding of upgrades to critical national security system.   We encourage you to apply if you have any of these preferred skills or experiences: Installation and sell-off of upgrades...

Basic Qualifications Requires a Bachelor’s degree in Electrical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.     CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position As an Electrical Hardware Design Engineer, you will be a key part of a cross-functional team responsible for designing complex and mission-critical systems. You will have the opportunity to be involved in all program phases, including requirements analysis, schematic capture, defining routing...

Basic Qualifications Requires a Bachelor’s degree in Electrical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 2+ years of job-related experience, or a Master's degree and 6 months of job-related experience. Agile experience preferred,   CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As an electrical engineer for autonomous undersea systems, you’ll be a member of a cross functional team responsible for developing the next generation of subsea power systems and batteries.   We...

Basic Qualifications Requires a Bachelor’s degree in Electrical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.   CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As an electrical engineer for autonomous undersea systems, you’ll be a member of a cross functional team responsible for developing the next generation of subsea systems.   We encourage you to apply if you have any of...

Basic Qualifications Requires a Bachelor’s degree in Electrical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 8+ years of job-related experience, or a Master's degree plus 6 years of job-related experience.     CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As an electrical engineer for Bluefin Robotics, you’ll be a member of a cross functional team responsible for the design and development of subsea AUV systems. We encourage you to apply if you have any of these preferred...

Basic Qualifications Requires a Bachelor’s degree in Electrical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.     CLEARANCE REQUIREMENTS:  Ability to obtain a Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As an Electrical Hardware Design Engineer, you will be a key part of a cross-functional team responsible for designing complex and mission-critical systems. You will have the opportunity to be involved in all program phases, including...

Basic Qualifications Requires a Bachelor’s degree in Electrical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 2+ years of job-related experience, or a Master's degree and 6 months of job-related experience. Agile experience preferred,   CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is preferred at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As an electrical engineer for Nuclear Command, Control and Communications (NC3), you’ll a member of a cross functional team responsible for Designing, Implementing and Deploying the next generation of Strategic Weapon Systems.   We...