74 jobs found in Kings Bay Base, GA

Description: OCCUPATIONAL SUMMARY This classification requires the performance of precise calibration measurements and repair functions on electrical/electronic/physical/mechanical type reference and secondary standards, and related equipment. Maintain these standards and equipment to the requirements necessary for achieving traceability to the National Institute of Standards and Technology (NIST), the United States Navy, or other recognized national metrology institutes. Work is performed where standards, procedures, and sequences have been determined. Perform varied work assignments within the Metrology Organization to acquire the knowledge, skill, and ability required to perform the duties of a qualified Electronic Calibration Technician Senior. WORK PERFORMED Work in Metrology functions with technical assistance and guidance or work independently with complete procedures or written instruction after initial on-the-job instruction and guidance. Work with...

Description: OCCUPATIONAL SUMMARY This classification requires the performance of precise calibration measurements and repair functions on electrical/electronic/physical/mechanical type reference and secondary standards, and related equipment. Maintain these standards and equipment to the requirements necessary for achieving traceability to the National Institute of Standards and Technology (NIST), the United States Navy, or other recognized national metrology institutes. Work is performed where standards, procedures, and sequences have been determined. Perform varied work assignments within the Metrology Organization to acquire the knowledge, skill, and ability required to perform the duties of a qualified Electronic Calibration Technician Senior. WORK PERFORMED Work in Metrology functions with technical assistance and guidance or work independently with complete procedures or written instruction after initial on-the-job instruction and guidance. Work with...

Description: You will be the Engineering Aide Specialist for the Engineering Support Team. Our team is responsible for maintaining and troubleshooting electromechanical equipment and systems. What You Will Be Doing As the Engineering Aide Specialist you will be responsible for ensuring the reliability and performance of electronic, mechanical, electromechanical, and optical equipment across multiple test areas. Your responsibilities will include, but are not limited to: Construct, troubleshoot, and diagnose electronic, mechanical, electromechanical, and optical equipment. Perform maintenance and repairs on components, devices, and systems using schematics and engineering drawings. Operate test equipment, conduct tests, and report data in prescribed formats. Manage tooling and equipment inventory across multiple storage facilities. Coordinate with vendors and buyers to obtain quotes, repairs, and procure test equipment and supplies. Why Join Us...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. Special Programs is seeking an Electro-Optical (EO) Engineer who is passionate about EO and can apply technical skills to develop optimized solutions for complex challenges. What You Will Be Doing As the Electro-Optical Engineer your skill set should include physics-based modeling, laser system design, laser system alignments, laser system processing and/or algorithm development. The EO Engineer must understand the sensitivities associated with the various parts of the laser ranging chain to quickly and effectively perform system design trades. Although...

Description: You will be the System Integration and Test Engineer to support a program's system integration and system qualification initiatives in Orlando, FL. Our team is responsible for executing sub-system and system level integration and tests for new and existing products. What You Will Be Doing As the I&T Engineer, you will be responsible for the following: • Generating and executing sub-system and system level integration and test plans/procedures • Assessing verification approach to system requirements • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support integration efforts of new designs or design changes Why Join Us We're looking for a highly adaptable and motivated engineers to join our team. If you...

Description: Lockheed Martin Missiles and Fire in Orlando, FL is seeking an experienced Integration, Test, and Evaluation (IT&E) Engineer to support missile and sensor development programs. Our team is dedicated to delivering innovative solutions, and you will play a key role in supporting the test series leading up to flight testing. What You Will Be Doing The selected Integration, Test, and Evaluation (IT&E) Engineer will lead subsystem and system-level integration and testing, use of test equipment during missile processing, and preparation of test related documentation. The candidate will lead a team in the planning and execution of the development, qualification and integration test effort, to include subsystems and missile level activities. This role will also require the candidate to oversee the assembly and test of mockup missiles and live ordnance flight test missiles. The candidate will work under only general direction reporting to a program IT&E Lead....

Description: What We're Doing At Lockheed Martin, we believe that by applying the highest standards of business ethics and forward-thinking, everything is within our reach - and yours as a Lockheed Martin employee. We value your unique skills and expertise, and we aim to give back continuously by offering a wide variety of benefits and amenities to help our employees live flexible, balanced, and fulfilling lives at, and outside of, work. The Work Lockheed Martin Rotary and Missing Systems has an opportunity in Orlando for a mid-career Software Engineer supporting the Automatic Test Equipment (ATE) programs. An ATE Software Engineer is responsible for developing, updating, and integrating software applications on ATE hardware. ATE Software Engineers also support test program development and integration. As a key member of our Software Engineering team, you will: • Contribute to the creation of design solutions for complex engineering problems in the software cycle. •...

Description: You will be the FPGA Design Engineer for the Missile & Fire Control (MFC) team at Lockheed Martin. Our team delivers advanced FPGA solutions that enable current and next generation defense systems, providing the high performance computing and signal processing capabilities required for mission critical platforms. What You Will Be Doing As the FPGA Design Engineer you will develop FPGA architectures from specification through implementation, conduct trade studies to optimize device utilization, power and thermal performance, and work closely with software, hardware and systems engineers to define requirements and ensure compliance with the Design Assurance process. Your responsibilities will include: • Translating system specifications into detailed FPGA designs, creating RTL, constraints and HDL code (VHDL/Verilog). • Performing synthesis, place and route, timing analysis and power budget assessments to meet performance, power and thermal budgets. •...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. What You Will Be Doing Lockheed Martin is seeking an RF Engineer, for the planning and completion of the product baseline development, integration, and verification efforts, as well as the planning and execution of current and future changes. The candidate will work extensively with suppliers to develop and execute qualification testing schemes and provide requirement verification artifacts. The candidate will need to closely collaborate with internal LM stakeholders as well as U.S Government representatives to ensure all requirements are met. Essential tasks...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. What You Will Be Doing Lockheed Martin is seeking an RF Engineer, for the planning and completion of the product baseline development, integration, and verification efforts, as well as the planning and execution of current and future changes. The candidate will work extensively with suppliers to develop and execute qualification testing schemes and provide requirement verification artifacts. The candidate will need to closely collaborate with internal LM stakeholders as well as U.S Government representatives to ensure all requirements are met. Essential tasks...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are seeking an IT&E RF Engineer to join our Hardware-in-the-Loop (HWIL) Center of Excellence (COE) team in sunny Orlando. The successful candidate will be responsible for designing, calibrating, troubleshooting, operating and maintaining advanced RF HWIL systems, subsystems, and components. Additionally, they will design RF circuits, perform signal integrity measurements, analyze real-time simulation output, and manage the repair and replacement of RF subsystem components. What You Will Be Doing • Operate, calibrate, troubleshoot and maintain advanced RF Hardware-in-the-Loop (HWIL) systems,...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. What You Will Be Doing The ideal candidate possesses strong programming skills in MATLAB, is comfortable with Python based analysis and C++ code interpretation, and can navigate complex, multi functional and multi company collaborations while juggling support for several concurrent contracts. Your Day to Day Activities (Typical) • Run scripts and analyze data from various different sources; validate results against expected sensor performance envelopes. • Develop/modify MATLAB-based tools for data preprocessing, file conversion, and automated report...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and looking for an RF Engineer to provide state of the art Radar Cross Section testing. What You Will Be Doing The responsible engineer will be performing RF testing in an engineering development lab. Tasks will include but not limited to material, subcomponent, and system level testing. The RF engineer will be responsible for preparing comprehensive test reports and work with program leads. Aside from program work, the RF engineer will organize data and conduct health check of the anechoic chambers. Why Join Us We are committed to supporting your work-life...

Description: What You Will Be Doing You will be a Strategic Software, Staff with the ability to capture/derive requirements and perform CSCI/CSC/CSU decomposition, detailed design work, and bench level testing. Candidate will perform requirements capture through detailed design, implementation, and integration of a new System on a Chip (SoC) design for Block 1.1. Candidate will be responsible for supporting all data link software design including the following specialty capabilities: RF waveform implementation and incorporation of Simulink Coder into software, cryptographic algorithm development and debug, and low-speed messaging and communication with external peripherals. Prior experience with Microchip SoC’s, Xilinx SoC’s, UVM, and GitLab is preferred. As a Staff Software Engineer, your responsibilities will include but are not limited to: • Develop and maintain embedded software applications and/or desktop applications. • Tasks will involve requirement, design, code,...

Description: You will be the Circuit Card Design Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team designs, develops and fields precision engagement aerospace and defense systems, delivering high reliability circuit card assemblies (CCAs) that power missiles, sensors and other mission critical subsystems. What You Will Be Doing As the Circuit Card Design Engineer you will own the end to end creation of CCAs—from architecture and schematic capture through EPCAD layout, prototype build up and test. You will partner with systems, electromechanical, firmware/software and manufacturing groups to ensure every design meets performance, environmental and security requirements while keeping the program on schedule. Your responsibilities will include • Lead architecture, schematic capture and EPCAD layout for CCAs supporting missile and sensor subsystems. • Define, refine and document system, performance, interface and environmental...

Description: You will be the Senior Signal Integrity / Power Integrity Electrical Engineer responsible for ensuring the electrical performance of high-speed and mixed-signal printed circuit board assemblies across MFC programs. The engineer performs pre- and post-layout SI/PI analysis, defines PCB stack-ups and routing constraints, supports board sign-off, and partners with program design teams as a recognized subject-matter expert. This role contributes to the MFC SI Center of Excellence and helps establish design standards, modeling flows, and best practices that scale across the Circuit Card Design portfolio. What You Will Be Doing You will be responsible for: • Perform pre-layout SI/PI analysis on high-speed interfaces (DDR, PCIe, SerDes, Ethernet, USB) — channel modeling, eye-diagram and jitter budgets, termination strategy. • Define and review PCB stack-ups, controlled-impedance and length-matching rules, and via/breakout strategies in coordination with PCB designers. •...

Description: You will be the HyperLynx Analog Simulation Engineer for the Circuit Card Design Technology Council within Lockheed Martin Missiles & Fire Control (MFC). Our council establishes the simulation standards, reusable model libraries and methodology that power every circuit card assembly (CCA) program across the MFC portfolio, ensuring mission critical hardware is designed with confidence and consistency. What You Will Be Doing As the HyperLynx Analog Simulation Engineer you will be responsible for leading SPICE based analog and mixed signal simulation work, authoring the department’s modeling standards, and partnering with Siemens technical leadership to shape the future of the HyperLynx/Xpedition tool suite. Your work will directly impact hardware designs from concept through verification and will be leveraged by programs for years to come. Your responsibilities will include: • Performing SPICE based analog and mixed signal simulations in Siemens HyperLynx...

Description: You will be the Electromechanical Design Engineer for the Missiles & Fire Control (MFC) Hardware Engineering team. Our team designs, develops and manufactures precision engagement aerospace and defense systems for the United States and allied partners, delivering innovative electronic packaging solutions, hands on prototypes, and production ready hardware. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for creating cutting edge electromechanical concepts and delivering production support across multiple defense programs while partnering with a diverse set of cross functional teammates. Your responsibilities will include: • Designing electromechanical systems and components such as circuit card assemblies, harnesses, electronic enclosures and sub assemblies. • Producing detailed mechanical layouts, 3 D models and engineering drawings, selecting appropriate materials, components and manufacturing processes. • Modeling...

Description: You will be the FPGA Engineer for the Digital Logic Integration team. Our team delivers mission critical hardware and software that connects sensors, actuators and compute platforms across a range of defense programs, ensuring reliable, high performance operation from concept through fielding. What You Will Be Doing As the FPGA Engineer you will capture and translate system requirements into detailed FPGA architectures, drive simulation and verification, and integrate designs with board level hardware. You will work closely with hardware, software and test partners to validate the complete system and lead design assurance activities that keep the program on schedule and compliant with aerospace standards. Your responsibilities will include • Elicit, refine and document functional and performance requirements for FPGA designs. • Create detailed RTL (VHDL/Verilog/SystemVerilog) and accompanying constraints to meet timing, power and reliability goals. • Develop and...

Description: You will be the ASIC & FPGA Design Engineer for the ASIC/FPGA department at Lockheed  Martin  Missiles  and  Fire  Control. Our team delivers full custom analog and mixed signal ICs that power advanced defense systems, ranging from 130 nm down to 12 nm and including high voltage BCD processes. What You Will Be Doing As the ASIC & FPGA Design Engineer you will own the entire layout flow—from floorplan through tape out—working hand in hand with circuit designers to turn schematic intent into high performance, parasitic aware physical designs. You will operate in a dual tool environment (Synopsys Custom Compiler and Cadence Virtuoso) and drive physical verification closure across multiple foundries, directly supporting mission critical programs. Your responsibilities will include: • Create floorplans, place and route analog blocks, optimizing area, matching, signal integrity and power delivery. • Drive DRC, LVS and ERC verification to achieve full closure...