28 construction jobs found

Description SAIC is seeking a motivated Electrical Engineer to join our team in Crane, IN, supporting critical defense electronic systems that directly impact mission readiness and warfighter capability. Key Responsibilities: Conduct design reviews to assess the functionality and performance of defense electronic systems and ensure adherence to operational requirements. Collaborate on system integration activities to ensure seamless adoption of new or modernized systems into the existing architecture. Lead engineering investigations to analyze and resolve issues impacting system performance in the field. Develop and implement engineering change proposals (ECPs) to improve and modernize legacy systems for optimal efficiency and performance. Assess obsolescence risks of existing components and systems; provide innovative and cost-effective solutions to extend their lifecycle. Work closely with a multifunctional fleet support team to address and resolve complex...

Standard Job Description Directs the architecting and designing of Radio Frequency systems and circuitry. Coordinates subordinate employee recruitment, selection and training, performance assessment, work assignments, salary, and recognition/disciplinary actions. Manages the design and development of RF circuitry used in high frequency and microwave applications, including receivers, transmitters, antennas, and frequency synthesizers. Leads the staff responsible for hardware layout, component evaluation, prototype construction, and test. Oversees the preparation of the following: test methods and specifications; analysis and testing of RF hardware to verify performance characteristics. Provides inputs to Product Development for formal documentation and supports manufacturing during the deliverable assembly and test phase. Manages the development of RF System/Subsystem Architectures consisting of: antennas, transmitters, receivers, low noise amplifiers, high power amplifiers,...

Description SAIC is seeking an Electrical Technician in support of a full-rate production program at the Bedford, Indiana Production Facility. This is a hands-on, production-floor role supporting the fabrication, integration, assembly, and testing of mission-critical containerized systems in direct support of systems operations. Key Responsibilities: Fabricate, assemble, and install electrical harnesses, cable assemblies, and wiring systems in accordance with engineering drawings and work instructions Perform crimping, soldering, and termination of connectors Build and test battery cable assemblies, power distribution systems, and low-voltage control wiring Read and interpret electrical schematics, wiring diagrams, and assembly drawings Perform continuity, insulation resistance, and functional testing of completed cable assemblies and electrical systems Support integration of communications equipment, RF systems, antennas, and electronic...

Description SAIC is seeking a motivated Electrical Engineer to join our team in Crane, IN, supporting critical defense electronic systems that directly impact mission readiness and warfighter capability. Key Responsibilities: Conduct design reviews to assess the functionality and performance of defense electronic systems and ensure adherence to operational requirements Collaborate on system integration activities to ensure seamless adoption of new or modernized systems into the existing architecture Lead engineering investigations to analyze and resolve issues impacting system performance in the field Develop and implement engineering change proposals (ECPs) to improve and modernize legacy systems for optimal efficiency and performance Assess obsolescence risks of existing components and systems; provide innovative and cost-effective solutions to extend their lifecycle Work closely with a multifunctional fleet support team to address and resolve complex challenges...

Description SAIC is seeking a highly skilled Hardware Design Engineer with expertise in board-level circuit design. The ideal candidate will be capable of taking concepts from initial requirements through detailed circuit design, PCB layout, simulation, system integration, and hands-on laboratory validation. This role requires strong analytical skills, attention to detail, and proficiency working across RF, analog, and digital domains. Qualifications Key Responsibilities: Perform conceptual circuit design and develop system block diagrams. Select key components based on electrical, RF, thermal, and manufacturability requirements. Create detailed board layouts using Altium Designer, including schematic capture, component library creation, footprint definition, and fabrication documentation. Place and route PCB designs with attention to RF behavior, signal integrity, grounding, and manufacturability. Conduct circuit simulation using various engineering...

Description SAIC is seeking an Electrical Engineer Senior to assist with tasking related to the design, manufacture and sustainment of US Military related systems, and other military systems in support of its Indianapolis facility. Tasking will include but will not be limited to design, development, modification, evaluation and test of a variety of electronic equipment and electrical systems. May work with radar and RF systems, communications equipment and systems, circuitry components, analog and digital circuits and processors, control systems, acoustic systems, electro-optic systems, weapon system launch and control circuitry, and test equipment design and development. Candidate is expected to use and apply technical standards, principles, theories, concepts and techniques to design circuits, layout circuit cards, analyze electronic systems, and troubleshoot electronic and electrical constructs. Qualifications REQUIRED QUALIFICATIONS: ⦁ Bachelor's degree and...

Description SAIC is seeking an Electrical Engineer to assist with tasking related to the design, manufacture and sustainment of US Military related systems in support of its Indianapolis facility. Tasking will include but will not be limited to design, development, modification, evaluation and test of a variety of electronic equipment and electrical systems. May work with radar and RF systems, communications equipment and systems, circuitry components, analog and digital circuits and processors, control systems, acoustic systems, electro-optic systems, weapon system launch and control circuitry, and test equipment design and development. Candidate is expected to use and apply technical standards, principles, theories, concepts and techniques to design circuits, layout circuit cards, analyze electronic systems, and troubleshoot electronic and electrical circuits. Qualifications REQUIRED QUALIFICATIONS: ⦁ Bachelor's degree and two (2) years or more experience;...

Position: Hardware Engineer (Einfochips Inc) Job Description: What You'll Be Doing: Experience designing boards with microprocessors (Iike iMX8, iMX9) and microcontroller (ESP32, STM32) is essential. Good understanding of Display inerfases MIPI DSI,  Parallel Bus, LVDS, HDMI Camera interfaces , CSI, USB Schematics, Layouts – Uage of tools Altium, Cadence Toruble shooting the hardware boards Good understanding of Lab tests EMI/EMC Good understanding of certifications and regulatory requirements (UL/FCC) Cost estimations/Component selection/BOM creations Supplier interaction Electronics Design & Development, select components and design schematics, collaborate with customer on component placement and PCB size. Do layout design and high-speed interface guidelines, perform signal integrity, power integrity, and thermal analysis and review Gerber files. Testing Design sensor boards (Motion, Light, Accelerometer, Temperature,...

Position Summary Odyssey has an exciting opportunity for a Systems Integration and Test Engineer (SE‑3) supporting the 46 Test Squadron / TGBC at Eglin AFB, FL under the TMAS III contract.   The Datalinks Test Flight is seeking a degreed computer scientist or engineer with software development/scripting knowledge and work experience to support the design, construction, integration, and sustainment of Test & Evaluation (T&E) systems in the Advanced Datalinks Test Lab (ADTL). The environment is fast‑paced and centers on innovative digital communications technologies, offering both on‑the‑job training and formal technical coursework. Candidates should have strong technical foundations with motivation to expand into additional required domains. Responsibilities may range from supporting project leads to leading efforts as experience progresses.   This is a full‑time, onsite position at Eglin AFB, FL. Limited telework may be authorized based on...

Standard Job Description Functionally tests, retests, evaluates, and verifies the performance of electrical, electronic,electro-optical, and electro-mechanical assemblies in accordance with established test procedures. Works from written data, such as, engineering specification, established test procedures, drawings, and schematics. Configures and operates test equipment. Utilizes tooling required to test, align, adjust, evaluate, and verify conformance of electrical, electronic, electro-optical, electro-mechanical assemblies to verify conformance to engineering requirements in accordance with established test procedures. Accepts and rejects hardware and creates acceptance and rejection documentation. Performs troubleshooting, including component level of production assemblies requiring ingenuity and the application of electrical principles. Plans work independently. Prepares and maintains test records and reports as required. Assists Test Engineering personnel and...

Standard Job Description You will be the Circuit Card Design Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team creates, prototypes and fields high reliability circuit card assemblies (CCAs) that power missiles, sensors and other mission critical defense systems for the United States and allied militaries. What You Will Be Doing As the Circuit Card Design Engineer you will own the end to end development of CCAs—from architecture and schematic capture through EPCAD layout, prototype build up and test. You will work hand in hand with systems, electromechanical, firmware/software and manufacturing partners to ensure every design meets performance, environmental and security requirements while keeping the program on schedule. Your responsibilities will include • Drive architecture, schematic capture and EPCAD layout for CCAs that support missile and sensor subsystems. • Define, refine and document system, performance,...

Standard Job Description Position details: Location: Littleton, CO Work Schedule: 9x80 Position type: Full-time onsite (this is not a hybrid position) Lockheed Martin Space is seeking a Staff RF Engineer to join our team in Littleton, CO ! By joining the Lockheed Martin Space Radio Frequency (RF) Talent Center (RFTC) team, you will contribute our mission supporting challenging programs related to Space Vehicles, Hypersonics, Human Space Flight and Interplanetary Missions, Missile Defense, and more. In this RF engineering role within LM Space, you will: - Support the Global Security portfolio of programs by supporting timing, frequency, and ephemeris design on world class RF Payloads across various stages in each program’s lifecycle. - Perform system design and architecture to identify optimal payload solutions for new program captures. - Engage in system requirements flow-down to implementation of hardware design, and integration and test to verify mission...

Position: Hardware Engineer Job Description: What You'll Be Doing: Gather requirements and finalize the architecture for the next-gen HMI module based on various SoCs including Qualcomm and NXP, Reneses, ESP Electronics Design & Development, select components and design schematics, collaborate with customer on component placement and PCB size. Do layout design and high-speed interface guidelines, perform signal integrity, power integrity, and thermal analysis and review Gerber files. Testing Design sensor boards (Motion, Light, Accelerometer, Temperature, Gyroscope, Magnetometer, calibrate sensors) and integrate with HMI Module. Protocol experience in SPI, I2C, Serial, UART, USB, DSI, CSI Coordinate with fabrication, assembly, and integration teams, conduct bring-up, functional, EDVT, thermal, and performance testing. What We Are Looking For: Experience / Education Typically requires a 4 year degree in   electrical/electronics   and a minimum of 8...

Description: Join Our Team as an Electronics Engineer where you will work on the development of a sophisticated state-of-the-art avionics product in a world class Integrated Product Development environment. Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Courtland AL and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and seeking an RF Design Engineer at Lockheed Martin's Andover, MA facility. We offer an excellent working environment with a mix of cutting-edge design and genuine hands-on electronics laboratory testing and product development. This exciting RF position provides an opportunity to be a key contributor on our team of industry-leading RF design experts. What You Will Be Doing In this role, the Senior Staff RF Engineer will lead the development and production of complex multi-function modules used in challenging high reliability applications in all phases of the product life...

Description: Join Our Team as an Avionics Electronics Engineer where you will work on developing the new Long Range Hypersonic Weapon (LRHW), leveraging our decades of hypersonic experience and expertise. Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Huntsville AL and be expected to work a flexible 9x80 schedule in the office full-time. Ready for a challenge at the speed of Hypersonic? Come join Lockheed Martin's Long Range Hypersonic Weapon team. Our system will travel at Mach 5 (over a mile per second)! Helping us create a system that goes that fast means overcoming several difficult physics and engineering challenges. You will be integrating hypersonic missile technology into an Army battery on a highly accelerated schedule to deliver a hypersonic operational prototype system to the Soldier. What does this role look like? The role focuses on designing and developing electrical interfaces...

Basic Qualifications Bachelor's degree in Systems Engineering, or a related Science, Engineering or Mathematics field, plus a minimum of 2 years of relevant experience; or Master's degree, plus 6 months of relevant experience.   CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES:   As a Shipyard Installation and Test Engineer for GDMS Field Engineering, you’ll be a member of a cross functional team responsible for supporting the construction and integration of the COLUMBIA Class ballistic missile submarines. This position is...

Description: You will be the Harness Design Engineer for the Advanced Development Programs (ADP) team which is responsible for developing cutting‑edge aircraft harness and interconnect solutions. What You Will Be Doing As the Harness Design Engineer you will be responsible for translating electrical specifications into robust wiring harness designs, creating detailed routing diagrams, and ensuring integration across mechanical and structural domains. Your responsibilities will include: Produce electrical wiring schematic drawings and design intricate power distribution systems. Gather and validate specifications, generate routing diagrams, cable layouts, and installation procedures. Coordinate with mechanical, structural, and integration teams to resolve clashes and meet safety and compliance standards. Create and maintain documentation such as routing drawings, installation guides, and change‑request tracking. Develop supplier statements of work, oversee...

Description: You will be the Electrical Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team delivers precision engagement aerospace and defense systems, designing, building and fielding the electrical hardware that powers missiles, sensors and other mission critical subsystems for the United States and allied militaries. What You Will Be Doing As the Electrical Engineer you will drive the design, analysis, integration and test of circuit card assemblies (CCAs) and related electrical subsystems. You will work side by side with systems, software, manufacturing and quality partners, providing hands on laboratory support and production assistance to keep programs on schedule, on budget and fully compliant with defense standards. Your responsibilities will include • Design and analyze CCAs, performing schematic capture, PCB layout and integration with system level architectures. • Conduct electrical testing, troubleshooting and...

Description: Perform visual inspection and testing operations on aircraft electrical and electronic systems. Follow general instructions, standard inspection procedures, engineering drawings, engineering specifications, check sheets, and other written or oral instructions to perform standard electrical inspection and testing operations. Utilize Electronic Operation Sheet System (Solumina) for accountability of all assembly/inspection operations and test requirements. Inspect systems and components for physical conditions, proper identification, completion and installation of all parts and assemblies, satisfactory workmanship. Check for broken strands in wiring, sufficient strain relief, proper mechanical connection, identification, and condition of plugs, wiring, and insulation. Conduct high potential and insulation resistance test on fuel gage wiring antenna cables, as occasion requires. Document Non-Conformances utilizing Electronic Documentation System (Solumina) on...