31 devops engineer jobs found

Basic Qualifications Requires a Bachelor’s degree in Systems Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 8+ years of job-related experience, or a Master's degree plus 6 years of job-related experience. Agile experience preferred.   CLEARANCE REQUIREMENTS: Department of Defense TS/SCI security clearance is preferred at time of hire. Candidates must be able to obtain a TS/SCI clearance within a reasonable amount of time from date of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required.   Responsibilities for this Position GDMS Sr. Advanced Systems Engineers analyze, design, develop and test GDMS systems to ensure the integration of software, hardware, reliability,...

Basic Qualifications Requires a Bachelor’s degree in Systems Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 2+ years of job-related experience, or a Master's degree and 6 months of job-related experience. Agile experience preferred.   CLEARANCE REQUIREMENTS: *clearance obtainable* Department of Defense TS/SCI security clearance is preferred at time of hire. Candidates must be able to obtain a TS/SCI clearance within a reasonable amount of time from date of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: Our systems typically include digital signal processing algorithms that are implemented in...

Basic Qualifications Requires a Bachelor’s degree in Systems Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience. Agile experience preferred.   CLEARANCE REQUIREMENTS:  Department of Defense TS/SCI clearance required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required.  Responsibilities for this Position GDMS Advanced Systems Engineers analyze, design, develop and test GDMS systems to ensure the integration of software, hardware, reliability, maintainability, safety and other requirements in the total engineering effort.   Responsibilities include requirements analysis,...

Basic Qualifications Requires a Bachelor’s degree in Systems Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 8+ years of job-related experience, or a Master's degree plus 6 years of job-related experience. Agile experience preferred.   CLEARANCE REQUIREMENTS: Department of Defense TS/SCI security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required.   Responsibilities for this Position GDMS Sr. Advanced Systems Engineers analyze, design, develop and test GDMS systems to ensure the integration of software, hardware, reliability, maintainability, safety and other requirements in the total engineering effort.   Responsibilities include...

Description: What We're Doing At Lockheed Martin, we are passionate about innovation and integrity. We believe that by applying the highest standards of business ethics and forward-thinking, everything is within our capacity – and yours as a Lockheed Martin employee. Lockheed Martin values your skills, training, education, and background! The Work We are looking for a talented and motivated Lead Software Engineer to join our growing integrated team working on state of the art radar systems and electronic warfare technology. As a Software Engineer Lead, you will have the opportunity to work on exciting projects, collaborate with a diverse and talented group of individuals, and contribute to the development of innovative solutions. In this role you will: • Collaborate with other engineering disciplines and program personnel. • Participate in cross-functional Six Sigma-style product or process improvement meetings. • Stay up-to-date on emerging technologies and tools. • Be...

Basic Qualifications Requires a Bachelor’s degree in Systems Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 8+ years of job-related experience, or a Master's degree plus 6 years of job-related experience. Agile experience preferred.   CLEARANCE REQUIREMENTS:  Department of Defense TS/SCI security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position GDMS Sr. Advanced Systems Engineers analyze, design, develop and test GDMS systems to ensure the integration of software, hardware, reliability, maintainability, safety and other requirements in the total engineering effort.   Responsibilities include...

Basic Qualifications Requires a Bachelor’s degree in Systems Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience. Agile experience preferred.   CLEARANCE REQUIREMENTS: *Obtainable Clearance* Department of Defense TS/SCI security clearance is preferred at time of hire. Candidates must be able to obtain a TS/SCI clearance within a reasonable amount of time from date of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position GDMS Advanced Systems Engineers analyze, design, develop and test GDMS systems to ensure the integration of software, hardware,...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. Lockheed Martin Space is seeking a Mechanical Engineer to join our FBM Reentry...

Description: This is a place for engineers, scientists, and problem-solvers who are ready to engage deeply, think critically, and build with purpose. You will not just launch a career. You will be part of something bigger. This is where the best are built. Lockheed Martin Space is seeking a full-time Early Career Software Engineer. In this role, the candidate plans, conducts, and coordinates software development activities. Designs, develops, documents, tests, and debugs software that contains logical and mathematical solutions to business/mission problems or questions in computer language for solutions by means of data processing equipment. Applies the appropriate standards, processes, procedures, and tools throughout the development life cycle. Applies knowledge of computer hardware and software, subject matter to be programmed in business/mission applications, information processing techniques used, and information gathered from system users to develop software. Corrects...

Description: As part of the Engineering and Technology Raptor Avionics Organization at Lockheed Martin Space, this Electronics Engineering role supports the development of electronic hardware and test systems that ensure mission success for spacecraft and ground systems. Location: This position does not support teleworking ;the selected candidate will be located near our Lockheed Martin Space facility in: Littleton CO and be expected to work a flexible 9x80 schedule in the office full-time. What does this role look like? • Our team develops electronic circuits, test equipment, and hardware used in spacecraft integration and environmental test environments. • As a Circuit Design Engineer, you will design, develop, integrate, and sustain electronic circuits and test equipment while working in a collaborative, multidisciplinary engineering environment. • This role includes circuit design, schematic development, hardware integration, and support of hardware test and...

Description SAIC has an immediate need for a Senior Electrical Engineer supporting a team providing hardware and software development solutions to the CCDC Aviation & Missile Center S3I located in Huntsville, AL. The U.S. Army Combat Capabilities Development Command (CCDC) Aviation & Missile Center Systems Simulation Software & Integration (S3I) Directorate, SAIC develops and integrates advanced technologies during the entire life cycle of fielded Army aviation and missile systems. Representative examples include air and ballistic missile defense, fire support, close combat, manned and unmanned aviation, command, control and communications; interoperability, intelligence/surveillance, and automatic test equipment. Duties: Identifying and managing electrical/electronic hardware requirements. Performing circuit design, analysis, simulation and component selection for high availability, high reliability and low Size, Weight and Power (SWAP)...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team develops cutting edge circuit boards, interface cards and supporting hardware for our customer that must meet extreme size, weight, power and performance requirements. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for the Indirect Fire Protection Capability Inc 2 (IFPC2) program. This role has an emphasis on power architecture for circuit card design. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Working within the Electrical Engineering team and cross functional teams to effectively address integration and interface challenges • Defining, refining, and documenting system, performance, and interface...

Description: By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. At Lockheed Martin, we place an emphasis on empowering our employees by fostering innovation, integrity, and exemplifying the epitome of corporate responsibility. This is where the best are built. Lockheed Martin is in search of an innovative and talented Electronics Engineer to join the Launch & Test Support Equipment (L&TSE) team in Huntsville, Alabama. The L&TSE team develops tests and verifies various...

Description: The ideal candidate will bring extensive industrial experience in the design, assembly, integration and testing of spacecraft electronics. The role requires both deep and technical knowledge in the focus areas of Printed Circuit Board, Circuit Card Assembly, Electronics Packaging and Wire and Harness Design and the ability to advise, mentor and engage with senior government stakeholders. Within IGNITE, you will work in the Severn Operations Manufacturing Team providing support to internal and external customers. We're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. Key Responsibilities: • Understanding of manufacturing concepts and processes for production applications...

Description: You will be the Circuit Design Engineer Senior for the Laser Weapon System (LWS) Turret Control team. Our team develops the high precision control circuit assemblies that drive the turret closing motor loops for next generation directed energy weapons, ensuring reliable, rapid target acquisition and engagement. What You Will Be Doing As the Circuit Design Engineer Senior you will own the end to end development of the control circuit hardware—from initial concept through detailed design, simulation, verification, fabrication support and system integration. You will work closely with servo specialists, subject matter experts, mechanical packaging engineers and external vendors to deliver a robust, high performance, producible CCA that meets stringent laser weapon requirements. Your responsibilities will include: • Own the full product lifecycle for control circuit assemblies (CCA) • Develop detailed schematics and PCB layouts using industry standard tools. •...

Basic Qualifications Bachelor's degree in Electrical or Computer Engineering, or a related Science, Engineering or Mathematics field, plus a minimum of 8 years of relevant experience; or Master's degree plus a minimum of 6 years of relevant experience.   CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position As a  Sr Advanced FPGA/Firmware Engineer  for the Torpedo Systems Group, you will work with engineering teams to develop, deliver, and maintain software and firmware products. Additionally, you will be the government customer onsite and frontline engineering...

QED Systems, LLC, is currently recruiting a Senior Systems Engineer to join our team at Aberdeen Proving Ground, MD to support our C5ISR Positioning, Navigation, and Timing (PNT) Division contract. This is a Systems Engineering and Technical Advisor (SETA) position with an expectation to assume “hands-on” responsibilities for leadership, execution, and completion of projects and programs within the PNT Division portfolio. Use your experience in Radio Frequency (RF), Electrical Engineering, Systems Engineering, Communications / Signals Engineering, or Software Engineering with a background in data analysis and hardware integration to execute duties including but not limited to the following: Duties: Serve as an engineer and team member with responsibility for a portion of an S&T effort. Prepare contract documentation defining requirements, objectives to be obtained and standards of performance. Develop techniques and improve algorithms to exploit and combine...

Description: WHAT WE’RE DOING Lockheed Martin is advancing next-generation command and control capabilities to support critical missions through scalable, data-driven systems. You will join the Enterprise Mission C2 (EMC2) organization leading the Radar & Advanced Comms Integration and Support Team in Valley Forge, PA. We are seeking an experienced Full Spectrum Leader with experience in leading multi-disciplinary teams working toward varying objectives. This organization has two product teams: • One team is focused on Advanced Communication Capabilities (such as 5G), working across RMS – Mission Integrated Command & Control (MIC2) on program or internal investment portfolios with partnership with Enterprise Technologies. • The second team develops the Scalable S-Band Radar (S4R) Mission Planner Module (MPM) and supports Radar Control Processor (RCP) design engineering. These engineers develop radar modeling, scene modeling, signal construction, signal processing, and...

Description: You will be the Senior ElectroMechanical Engineer on the Advanced Programs hardware engineering team within Lockheed Martin Missiles & Fire Control (MFC). Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries. You’ll work on cutting edge electronics packaging, hands on prototype builds, production support, and technical leadership that directly impact next generation missile and radar programs. What You Will Be Doing As the Senior ElectroMechanical Engineer you will act as a key technical contributor on one or more defense programs, guiding hardware from concept through low rate production and full rate manufacturing. You’ll lead cross functional teams, create detailed electromechanical models and drawings, define test criteria, and drive issue resolution while mentoring junior engineers and championing an inclusive, collaborative culture. Your responsibilities will include: • Lead...

Description: As a Manufacturing Engineering Sr Stf within IGNITE, you will work in the Severn Operations Manufacturing Team providing support to internal and external customers. We're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. Key Responsibilities: • Manufacturing concept and process solutions for production applications cover advanced technologies including but not limited to composites fabrication, assembly, automation, inspection, direct part manufacturing, emerging technologies, as well as digital capabilities. • Analyzes, researches, designs and develops materials and their related fabrication and application processes to develop and optimize materials for use in engineering...