9 rf test technician jobs found

Description: Work with a production team to perform RF and electronic testing, troubleshooting, and assembly on a wide range of complex electronic systems in a cleanroom environment at a workbench or workstation, including maintaining accurate documentation of test data and setup/maintenance of RF test setups. Support RF performance testing through environmental testing like TVAC, thermal, vibe, etc. Basic Qualifications: Proficient with: DC power supplies, digital multimeters, precision oscilloscopes, signal generators, RF power amplifiers, power meters, network analyzers/VNAs (PNA/PNA X), spectrum analyzers (phase noise/spur mode), vector signal analyzer, noise figure meters (or built in NF option), phase noise analyzers, data acquisition/test automation hardware (PXI, NI DAQ, USB digitizers), and ESD controlled clean room workstations with microscope and precision hand tools. Demonstrated experience: Proficient and experienced with bench level CCA testing, including a...

Description: You will be the Senior Calibration Technician Specialist for the Calibration team. Our team is responsible for calibrating electronic test and measuring equipment to meet exacting standards. What You Will Be Doing As the Senior Calibration Technician Specialist you will be responsible for ensuring all test and measurement instruments are accurate, reliable, and ready for mission‑critical use. Your responsibilities will include, but are not limited to: Calibrate electronic, electromechanical, optical, pneumatic, and pressure‑type measuring instruments according to detailed specifications. Set up and execute calibration sequences, methods, and procedures using blueprints and drawings. Disassemble, clean, repair, and replace defective parts of test equipment such as pressure gauges and tension meters. Sets up calibration sequences, methods and procedures according to detailed specifications, blueprints, drawings, and requirements. May monitor...

Description Position: Senior Electronics Technician SAIC is seeking a Senior Electronic Technician to support the Expeditionary Electronic Warfare Division at NSWC Crane. This position supports electronic systems, integration and testing for the Testing Infrastructure Group (TIG). TIG at NSWC Crane provides specialized, high-reliability facilities and engineering expertise for the full life cycle --design, development, test, and evaluation --of Navy strategic systems, electronic warfare, and weapon systems. They focus on critical testing for radiation hardening, hardware-in-the-loop, and complex electronic systems to ensure mission success. You will be working onsite in a fast paced and dynamic environment where teamwork and collaboration are essential. SECRET to CLEARANCE Requirement: Interim Secret to start. Continued employment contingent upon favorable final Secret clearance. Responsibilities: • Install, configure, and maintain electronic systems, subsystems, and test...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and seeking an RF Design Engineer at Lockheed Martin's Andover, MA facility. We offer an excellent working environment with a mix of cutting-edge design and genuine hands-on electronics laboratory testing and product development. This exciting RF position provides an opportunity to be a key contributor on our team of industry-leading RF design experts. What You Will Be Doing In this role, the Senior Staff RF Engineer will lead the development and production of complex multi-function modules used in challenging high reliability applications in all phases of the product life...

Basic Qualifications Associate’s degree in related discipline or equivalent is required plus a minimum of 3 years of relevant experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Developing mission-critical systems that help keep people safe is what we do. At General Dynamics Mission Systems, you’ll be part of the team that helps heroes make a true impact. The work we do is important. The challenges we face are career-defining. The opportunity we can offer is one-of-a-kind. We apply advanced technologies such as Artificial Intelligence, Blockchain, AR/VR, Cloud Native and Quantum Physics...

QED Systems, LLC, is currently recruiting an Electrical Engineer to join our team at Aberdeen Proving Ground, MD to support our C5ISR Positioning, Navigation, and Timing (PNT) Division contract. Duties: Design, simulate, and implement advanced radio frequency (RF) systems and digital signal processing (DSP) algorithms in support of government and defense mission requirements. Develop and analyze RF system architectures, including link budget analysis, waveform characterization, and antenna performance evaluation. Transform raw in-phase and quadrature (IQ) data into actionable intelligence products through signal processing and analytical techniques. Prototype, test, and validate DSP algorithms using MATLAB, Simulink, Python (NumPy/SciPy), and C/C++ development environments. Perform filtering, spectral analysis, channelization, modulation/demodulation, detection theory, and multi-rate signal processing for RF applications. Support hardware-in-the-loop (HIL) testing...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and looking for an RF Calibration Engineer to join our team in Dallas, TX. The RF Seeker Calibration Engineer is responsible for the calibration, testing, characterization, and performance validation of Radio Frequency (RF) seekers used in radar-guided systems, such as missiles, drones, or other precision-guided munitions. This role ensures that RF seekers (active, semi-active, or passive radar homing systems) meet stringent accuracy, reliability, and performance requirements through precise calibration procedures, data analysis, and troubleshooting in laboratory, anechoic...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. THE WORK - Troubleshoots to the component level. Utilizes schematic diagrams to isolate failures on Analog and Digital circuitry. - Requires a strong knowledge of Solid State devices and micro-circuitry. - Works in a dynamic production environment and is able to produce at a high level in support of customer schedules. - Proficient in the use of various measurement devices including Digital Multi-meters, Oscilloscopes, Network Analyzers, frequency Standards, signal generators, and RF Power Meters WHO WE ARE We are a world class manufacturing center. Our...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. THE WORK - Troubleshoots to the component level of densely populated circuit boards. Utilizes schematic diagrams to isolate failures on Analog and Digital circuitry. - Requires a strong knowledge of Solid State devices and micro-circuitry. Works in a dynamic production environment and can produce at a high level in support of customer schedules. - Proficient in the use of various measurement devices including Digital Multi-meters, Oscilloscopes, Network Analyzers, frequency Standards, signal generators, and RF Power Meters. WHO WE ARE We are a world class...