10 aircraft mechanic jobs found

Description: This position is for a Mid-level Technician whose primary assignment will consist of engineering hardware fabrication support, troubleshooting, testing and laboratory operations responsibility, particularly in the area of military fiber optics. Performing Fiber Optic terminations and Fiber Optic repair is the primary job role. Candidate must be able to travel and be able to work on or around military aircraft. The ability to learn and operate fiber optic termination equipment and fiber optic test equipment. Some climbing on ladders may be required as well as lifting up to 25 pounds, pushing and pulling electronic equipment on carts, and working on test stations. These responsibilities will include fabrication of fiber optic and copper wire harnesses, electronic/electrical chassis and subassembly panels, mechanical rack fabrication, and various modifications to mechanical racks and electronic test stations using development engineering drawings. Ability to visualize...

Description SAIC is seeking an Electronic Technician to support the US Navy in Indianapolis, IN. JOB DESCRIPTION : Supports engineering activities such as design, test, checkout, modification, fabrication and assembly of prototype electromechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment. Applications may include electronic circuits, photonics and logic systems. Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions. Assists in determining methods or actions to remedy malfunctions. Collects, maintains, organizes, compiles, and manipulates technical data. Prepares engineering documentation, reports, drawings (sketches/flow charts/diagrams/schematics, etc.). Performs mathematical calculations per engineering specifications. Undertakes analyses of data where guidelines are provided. JOB DUTIES: Assembles,...

Description SAIC is seeking a highly qualified and experienced RADAR Systems Engineer for an immediate opening with the SENSE + INTERDICTION (SENSEI) Counter Unmanned Aerial Systems (CUAS)/Counter Unmanned Systems (CUxS) Research and Development (R&D) program in Crane, IN. This position requires technical expertise in the areas of RADAR technology, Radio Frequency (RF) engineering, and the ability to evaluate similar RADAR systems against defined operational and technical parameters. We are looking for a candidate to support the identification, analysis, and technical evaluation of high performance Active Electronically Scanned Array (AESA) RADAR systems. The teammate must be capable of high-level output centered on the identification, assessment, test, and evaluation of RADAR replacement candidates compatible with the SENSEI system. The primary responsibility will be to conduct an Analysis of Alternatives and provide the results to the government customer. You...

Description: We are Lockheed Martin • Works independently or leads a team to execute project, schedule, and technical requirements to meet the goals of the test program. • Responsible for specification, selection, design, integration, operation and maintenance of airborne data acquisition systems, and their related components. This includes telemetry, flight test specific hardware, or prototypes for flight test evaluation. • Oversee installation, checkout, and calibration of data systems, to ensure collected data can be properly displayed, processed, and analyzed. • Maintain configuration control, and mission capability of the instrumentation system as well as all associated ground support equipment. • Support preflight, post-flight, and control room activities for all scheduled mission. • Interface with test ops, maintenance, and management to ensure all instrumentation requirements are coordinated and accounted for. • Support occasional travel. A level 3 employee...

Description: By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. At Lockheed Martin, we place an emphasis on empowering our employees by fostering innovation, integrity, and exemplifying the epitome of corporate responsibility. Your Mission is Ours. Lockheed Martin Aeronautics is seeking a full-time Early Career F-35 Low Observable Signature Engineer for the F-35 Signature Integration team which is responsible for advancing the low observable capabilities of the F-35 fleet. In this role you will:...

Description: System Integration/Test Engineer - Level 4 At Lockheed Martin Aeronautics, we're taking innovation to the next level. From designing the most advanced air vehicle to designing aircraft that defies gravity, our engineers live on the cutting edge of technology. Never have the opportunities for a technical career been so limitless. Lockheed Martin Aeronautics. Be More Than You Can Imagine. As a member of the Low Speed Wind Tunnel (LSWT) team within the Lockheed Martin Flight Sciences group in Marietta, GA, the selected candidate will provide electrical and instrumentation engineering support to our large scale, low speed wind tunnel facility. The candidates responsibilities will involve instrumentation, as well as development, operation, and maintenance of wind tunnel electro-mechanical systems. Other tasks may include support of wind tunnel test article installation, operation of wind tunnel data acquisition systems, and repair and maintenance activities. This is...

Description: You will be a Calibration Technician supporting our Lockheed Martin Greenville Site. Our team is responsible for performing calibration and adjustments on Test Measurement and Diagnostic Equipment (TMDE).such as, but not limited to: oscilloscopes, signal generators, multi-meters, power supplies, frequency counters, spectrum analyzers, digital voltmeters, AC/DC Standards, power meters & sensors, digital multimeters, and electrical test sets, physical/dimensional equipment and hand tools. What You Will Be Doing The Calibration Technician will Use calibration procedures, manufacturers’ manuals and specifications and data sheets to accomplish work. Candidate must have a thorough knowledge of calibration lab safety, be a team player, and be quality minded. Candidate must be able to periodically lift and carry in excess of 50 lbs. What’s In It For You: 3 day weekends every weekend! Candidate must be able to work a 4x10B Tue -Fri From onsite to remote, we...

Description: We are Lockheed Martin This position is for a Flight Test Instrumentation Electrical Design Engineer. The selected candidate will participate in the electrical design efforts for the F-16 and F-22 lines of business. Primarily function as Electrical Engineer at Fort Worth supporting test sites and local activities. The candidate will be required to perform electrical design activities for the installation of flight test instrumentation electrical components to fulfill system design block diagrams of instrumentation systems. The candidate will be responsible for developing, understanding and releasing engineering drawings, creating technical designs using CATIA, selecting and understanding electrical components, creating work instructions, monitoring fabrication activities, providing liaison support with the fabrication shop and test sites, and providing mod support. This position will be responsible for communicating and coordinating with flight test instrumentation...

Description: We are Lockheed Martin At Lockheed Martin Aeronautics, we're taking innovation to the next level. From designing the most advanced air vehicle to designing aircraft that defies gravity, our engineers live on the cutting edge of technology. Never have the opportunities for a technical career been so limitless. Lockheed Martin Aeronautics Company, home of the world-renowned Skunk Works®, turns visionary aircraft into reality and is known for building the finest military aircraft in the world. This recognition is continually earned through our commitment to relentless research and development of high-performance aircraft, continuously seeking innovative, low-cost design and manufacturing strategies, and delivering operational readiness for our customers' missions to ensure continued relevancy for the life cycle of our products. The Skunk Works (Lockheed Martin Advanced Development Program) is looking for world class talent in SYSTEMS FIELD ENGINEERING to be a part...

Description: You will be the Systems Engineer Senior - Level 3 for the Advanced Development Program (ADP) which is responsible for pioneering cutting‑edge aircraft concepts and delivering advanced system solutions. What You Will Be Doing As the Systems Engineer Senior - Level 3 you will be responsible for driving complex system‑engineering efforts within the historic Skunk Works environment, ensuring integration, risk management, and timely delivery of high‑impact projects. Your responsibilities will include: Coordinating with cross‑functional teams to ensure seamless integration and timely delivery. Applying system‑engineering principles to meet milestones, manage risk, and validate solutions. Communicating status, risks, and recommendations to stakeholders to keep projects on target. Developing and authoring requirements and supporting documentation aligned with customer needs. What’s In It For You We are committed to supporting your work‑life balance and...