47 data engineer jobs found

Description: You will be the ARRW Mechanical Design Engineer Staff for the Missiles & Fire Control – ARRW Program. Our team is developing the first hypersonic missile to enter low rate production. What You Will Be Doing As the Mechanical Engineer for the Booster/All Up Round (AUR) you will be the primary mechanical engineering point of contact for ARRW LRIP and ARRW Incremental development. You will work closely with Glider mechanical engineering, AUR electrical engineering, and systems engineering to translate requirements into releasable technical data packages (TDPs). Your responsibilities will include: • Developing and generating CREO layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles • Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM • Coordinating the IPT team, suppliers, GSC, electronic packaging, optics, and structural/thermal/material analysts to ensure design...

Description: You will be the Senior ElectroMechanical Engineer on the Advanced Programs hardware engineering team within Lockheed Martin Missiles & Fire Control (MFC). Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries. You’ll work on cutting edge electronics packaging, hands on prototype builds, production support, and technical leadership that directly impact next generation missile and radar programs. What You Will Be Doing As the Senior ElectroMechanical Engineer you will act as a key technical contributor on one or more defense programs, guiding hardware from concept through low rate production and full rate manufacturing. You’ll lead cross functional teams, create detailed electromechanical models and drawings, define test criteria, and drive issue resolution while mentoring junior engineers and championing an inclusive, collaborative culture. Your responsibilities will include: • Lead...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for complex circuit cards. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for complex systems • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing schematics and...

Description: You will be the Electromechanical Design Engineer for the Common Command Flight Termination System (FTS) team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ESAF (Electronic Safe and Arm Fuze) packaging that will serve as the common ESAF backbone for every new FTS. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ESAF • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials,...

Description: You will be the Electromechanical Design Engineer for the Missile & Radar Electronics Packaging team. Our team delivers rugged enclosures, chassis, cold plates, card guides, wedge locks, and interconnect assemblies that enable high performance missile and radar hardware to operate reliably in demanding environments. What You Will Be Doing As the Electromechanical Design Engineer you will create and mature the mechanical and thermal solutions that marry the electronics to their protective structures. You’ll partner with circuit card designers, suppliers, and manufacturing partners to turn concepts into production ready hardware. Your responsibilities will include: • Developing detailed 3 D models and 2 D drawings in PTC Creo (ASME Y14.5/GD&T) and maintaining configuration control in Windchill (PDM/PLM). • Coordinating with circuit card designers to verify that CCA form factors, component heights, and connector placements fit the mechanical chassis and...

Description: You will be the Senior ElectroMechanical Engineer on the Advanced Programs hardware engineering team within Lockheed Martin Missiles & Fire Control (MFC). Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries. You’ll work on cutting edge electronics packaging, hands on prototype builds, production support, and technical leadership that directly impact next generation missile and radar programs. What You Will Be Doing As the Senior ElectroMechanical Engineer you will act as a key technical contributor on one or more defense programs, guiding hardware from concept through low rate production and full rate manufacturing. You’ll lead cross functional teams, create detailed electromechanical models and drawings, define test criteria, and drive issue resolution while mentoring junior engineers and championing an inclusive, collaborative culture. Your responsibilities will include: • Lead...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. What You Will Be Doing Lockheed Martin is seeking an RF Engineer, for the planning and completion of the product baseline development, integration, and verification efforts, as well as the planning and execution of current and future changes. The candidate will work extensively with suppliers to develop and execute qualification testing schemes and provide requirement verification artifacts. The candidate will need to closely collaborate with internal LM stakeholders as well as U.S Government representatives to ensure all requirements are met. Essential tasks...

Description: You will be the Mechanical Design Engineer for the F 35 Electro Optical Targeting System (EOTS) team in Orlando, FL. Our team delivers cutting edge mechanical solutions that keep the F 35’s mission critical sensors operating flawlessly, driving innovation from concept through production. What You Will Be Doing As the Mechanical Design Engineer you will be responsible for turning tough production and design challenges into elegant, manufacturable solutions. Working side by side with production, hardware design, and analysis groups, you’ll create new parts, issue engineering changes, and supply the detailed data the supply chain needs to build and ship world class hardware. Your responsibilities will include: • Generating and maintaining 3 D solid models and 2 D drawings in the Digital Product Lifecycle Management (dPLM) environment. • Producing release ready engineering documents (drawings, BOMs, assembly parts lists) for fabrication and procurement. •...

Description: Join Our Team as a Electronics Engineer, Power Support where you will work on the development of ground power systems for Electrical Ground Support Equipment for the Orion spacecraft supporting NASA’s manned Artemis missions. Location: This position does not support teleworking ; the selected candidate will be located near our Lockheed Martin Space facility in: Kennedy Space Center FL where you will be working a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. We are seeking an RF Systems Analysis Engineer for Lockheed Martin, supporting RF simulation analysis, antenna test data analysis, and captive flight test performance data analysis. Our team is responsible for ensuring the performance of passive RF sensor systems, and you will play a key role in analyzing and evaluating sensor performance. What You Will Be Doing As the RF Systems Analysis Engineer, you will be responsible for: • Conducting RF requirements analyses and executing trade studies to optimize system performance • Analyzing test data, including signal...

Description: You will be a Systems Integration and Test Engineer for Lockheed Martin's Missiles & Fire Control division. Our team is responsible executing Lab, Ground, and Flight testing to ensure successful development and deployment of critical systems. What You Will Be Doing As the IT&E Engineer, you will be responsible for the following: • Generating and executing sub-system and system level integration and test plans/procedures • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide engineering evaluations of redesigns or upgrades to the existing missile...

Description: You will be the Circuit Card Design Engineer on the ADSWAP CN program. Our team delivers mission critical power electronics for advanced defense systems, driving schematic capture, EPCAD layout, and full cycle Design Assurance for high reliability circuit card assemblies. What You Will Be Doing As the Circuit Card Design Engineer you will own end to end design—from initial concept through layout, verification, and release—ensuring each design meets power distribution, EMI, grounding, isolation, and environmental requirements. You will work side by side with mechanical, software, and test engineers to accelerate procurement and test cycles while providing complete design data packages for Design Assurance reviews. Your responsibilities will include: • Capture schematics and produce EPCAD layouts using Siemens Xpedition Enterprise, applying best practice routing, signal integrity, and EMI mitigation techniques. • Develop power distribution circuit card assemblies...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. What You Will Be Doing Lockheed Martin is seeking an RF Engineer, for the planning and completion of the product baseline development, integration, and verification efforts, as well as the planning and execution of current and future changes. The candidate will work extensively with suppliers to develop and execute qualification testing schemes and provide requirement verification artifacts. The candidate will need to closely collaborate with internal LM stakeholders as well as U.S Government representatives to ensure all requirements are met. Essential tasks...

Description: The Fleet Ballistic Missile (FBM) program is seeking an Lead Electronics Engineer to develop Automated Test Equipment. Location: This position does not support teleworking; the preferred candidate will be located near our Lockheed Martin Space facility at one of the Coolest places to work: Cape Canaveral FL and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. What does this role look like? You will support FBM LE refresh and design update projects for Electrical Ground Support Equipment (EGSE). Use your strong electrical engineering skills to work with all project partners and define the future for FBM! Key activities you...

Description: You will be the Electromechanical Design Engineer for the Common Command Flight Termination System (FTS) team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ISD (Ignition Safety device) packaging that will serve as the common ISD backbone for every new FTS. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ISD • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials,...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for complex circuit cards. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for complex systems • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing schematics and...

Description: What We're Doing At Lockheed Martin Rotary Mission Systems, we are at the forefront of innovation, working on exciting programs and developing cutting-edge products and applications to address the complex and evolving needs of our customers. Our team is dedicated to pushing the boundaries of technology and engineering excellence. The Work Lockheed Martin RMS is seeking talented engineers looking to utilize their hardware, software, and test skills by joining our Test Program Set Engineering team. Our team provides technical support for a number of aircraft and weapons systems to maximize operational readiness. Customers are both foreign and domestic and include branches of the US military. As a key member of our Test Program Set (TPS) Engineering Team, responsibilities will include: • Design TPS Hardware (Interface Test Adapters, Cables, Text Fixtures etc.) to interface required for testing hardware on automatic test stations. • Interpret electrical...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for complex circuit cards. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for complex systems • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing schematics and...

Description: You will be the Circuit Card Design Engineer for the Missile & Fire Control Advanced Programs at Lockheed Martin. Our team creates cutting edge electro optical/infrared (EO IR) products that deliver critical sensor capability for missile and aerospace platforms. What You Will Be Doing As the Circuit Card Design Engineer you will oversee technical execution, translate system requirements into subsystem designs, and create electrical interface and power distribution architectures. You will work closely with software, hardware and systems engineers, drive Integrated Master Schedule (IMS) tasking, manage procurement and testing, and guide the team through the Design Assurance process. Your responsibilities will include: • Developing detailed schematics, 3 D models and bill of materials for circuit card assemblies (CCAs) that meet size, weight, power and environmental constraints. • Performing signal integrity, power integrity and thermal analyses to validate...

Description: This is an exciting opportunity to work on the Fleet Ballistic Missile Program (FBM), a 63-year-old Program with a long-standing history of Mission Success and of a strong partnership with our Navy Customer! Are you an enthusiastic individual with a strong planning background that can thrive in an exciting fast-paced dynamic environment? Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Cape Canaveral FL and be expected to work a flexible 9x80 schedule in the office full-time. *Please note we will not provide relocation services for this position. What does this role look like? The new Hardware Engineer will support the LE2 program for Electrical Ground Support Equipment (EGSE). Use your strong electrical engineering skills to work with all project partners and define the future for FBM! Key activities you will accomplish in this role: • Participate in requirements analysis,...