291 electrical engineer jobs found

Description: Join us as an Electrical Engineer where you will design test equipment to test circuit boards. Location: Although this position does support some teleworking ; the selected candidate will need to be located near our Lockheed Martin Space facility in: Huntsville AL , and be expected to work in the office as needed and as appropriate. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and...

Basic Qualifications Requires a Bachelor’s degree in Electrical Engineering, or a related Science, Engineering or Mathematics field.    CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Key Responsibilities: Support design and analysis of AC-DC and DC-DC power systems under guidance of senior engineers Assist with integration, testing, and troubleshooting of electrical hardware Develop test procedures and documentation for power electronics validation Perform component research and support trade studies for power system solutions Design cable assemblies and support PCB development efforts...

Basic Qualifications Requires a Bachelor’s degree in Electrical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.     CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position As an Electrical Engineer, test Supporting the GD-MS Space, Cyber and Intelligence Systems Business the following Knowledge, Skills and Abilities will be required;    - Proficiency with RF Test Equipment; Spectrum, Network and Phase Noise Analyzers, Signal Generators, etc   - Excellent Written...

Everforth ECS is seeking a Senior Electrical Engineer to join the RPL team in Chantilly, VA . As a Senior Electrical Engineer, you will work on high performance RF systems used for Radar and Flight Termination System (FTS). Based on system requirements, you will collaborate with a multidisciplinary engineering team of RF Engineers, Mechanical Engineers, and Software Engineers, to derive solutions, perform verification testing, and troubleshoot any issues. A successful candidate will solve complex problems and complete hardware and firmware designs and perform hands on testing.

Everforth ECS is seeking an Electrical Engineer to join the RPL team in Chantilly, VA . As an Electrical Engineer, you will work on high performance RF systems used for Radar and Flight Termination System (FTS). Based on system requirements, you will collaborate with a multidisciplinary engineering team of RF Engineers, Mechanical Engineers, and Software Engineers, to derive solutions, perform verification testing, and troubleshoot any issues. A successful candidate will solve complex problems and complete hardware and firmware designs and perform hands on testing. Analyze customer requirements and derive detailed system, subsystem, and component-level specifications to drive electronic designs. Participate in major reviews such as: Systems Requirements Review (SRR), Preliminary Design Review (PDR), and Critical Design Review (CDR), and Test Readiness Review (TRR). Develop Electrical Designs at various levels from component-level up to system-level to meet customer...

Description: By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work.  At Lockheed Martin, we place an emphasis on empowering our employees by fostering innovation, integrity, and exemplifying the epitome of corporate responsibility. This is a place for engineers, scientists, and problem-solvers who are ready to engage deeply, think critically, and build with purpose. You will not just launch a career. You will be part of something bigger. This is where the best are built. Lockheed Martin...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary: SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. The local Middletown office supports automated test equipment design, printed circuit board design (PCB), cable design, and acoustic system design. Support can vary from Research & Development to Production Support tailoring both skills and interests of the prospective employee to fill the role. Location: Work is performed on-site work at 28 Jacome Way, Middletown, RI, and/or...

Description SAIC is seeking an Electrical Engineer Intern to support an exciting Navy mission in our new state-of-the-art labs in Middletown, RI . Job Duties: You will design and test electronic systems for embedded underwater applications, custom data acquisition systems, and automated test hardware for land-based testing of naval systems. You will develop and execute test plans for new designs and document your results. You will design and document systems and circuits in OrCAD, Eagle, Visio, Altium, or PADS. You will have powerful computer, software, and test equipment resources at your disposal to allow you to be effective and efficient in your job. Candidates must demonstrate a history of excelling at multiple concurrent challenges and an eagerness and aptitude for learning new things. Work in an interdisciplinary collaborative environment with other groups of engineers, logisticians, technicians, and draftsman to ensure the design meets requirements....

Basic Qualifications Bachelor's degree in Electrical Engineering, or a related Science, Engineering or Mathematics field, plus a minimum of 5 years of relevant experience; or Master's degree plus a minimum of 3 years of relevant experience.   CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required . Responsibilities for this Position ROLE AND POSITION OBJECTIVES: Perform circuit design, analysis, and verification for a variety of circuit types, including analog, digital, mixed-signal and power Create detailed electrical schematics, support PCB layouts, and generate comprehensive technical...

Description: You will be an Electrical Engineer at Lockheed Martin Missiles and Fire Control (MFC), joining one of the largest networks of engineering professionals. Our team is a recognized designer, developer, and manufacturer of precision engagement aerospace and defense systems for the U.S. and allied militaries, and we're looking for a talented engineer to join our team. What You Will Be Doing As an Electrical Engineer, you will be responsible for supporting engineers from other Lockheed Martin sites in failure investigation and troubleshooting, leading failure investigation, root cause analysis, and corrective action, and providing technical disposition/recommendation for production hardware. Your responsibilities will include: • Working closely with engineering lead in providing technical oversight and monitoring of a major subcontractor and related sub tier subcontractors. • Ensuring timely resolution of technical issues related to PAC-3 missile electronics to support...

Description SAIC is seeking a Senior Electrical Engineer for our customer site in North Charleston, SC . Roles/Responsibilities: (include, but are not limited to) Develop a modular, power distribution architecture for distributed maritime sensors Integrate voltage-level negotiation for subsystems (similar to that of USB-C PD) Incorporate renewable energy solutions such as wave harnessing, solar, peltier into a system architecture for improved persistence Perform power budget analysis to inform power system and support sensing, communication, and edge processing operations of complex systems Develop designs for signal/power PCBs using best practices for trace routing, thermal management, signal isolation, and grounding Qualifications Required Education: Bachelor's degree and nine (9) years of experience Relevant Background/Experience: Development of DC power distribution architectures Experience programming...

Basic Qualifications Requires a Bachelor’s degree in Electrical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.     CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. T his position is Hybrid/Flex with a minimum of 3 days per week on-site. Responsibilities for this Position As an Advanced Electrical Engineer, you will be a key member of a cross-functional team responsible for the full lifecycle of complex hardware systems, from initial concepts through...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary : SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. The local Middletown office supports automated test equipment design, printed circuit board design (PCB), cable design, and acoustic system design. Support can vary from Research & Development to Production Support tailoring both skills and interests of the prospective employee to fill the role. Location : Work is performed on-site work at 28 Jacome Way, Middletown, RI,...

Description Description SAIC is seeking a motivated and detail-oriented Electrical Engineer to join our team in Panama City Beach Florida. You will be working in a dynamic environment at our Holley Engineering and Integration Center supporting rapid development, prototyping, and production of cutting-edge adaptive warfare technologies. The ideal candidate will demonstrate a balance of technical expertise, problem-solving skills, and a collaborative mindset, with experience in handling mid-level engineering responsibilities. This role will support equipment design, cable design, system design, testing and troubleshooting. Support can vary from Research & Development to Production Support. The program focuses on asymmetric and adaptive warfare systems designed to provide flexible, cost-effective solutions for various asset types and modalities. It supports accelerated development and fielding of various technologies to address emergent warfighter requirements. Key...

Clearance Requirement: Ability to obtain and maintain a Secret Clearance Travel Requirements: Negligible Location: Norfolk or Fairfax, VA SUMMARY: WR has an opportunity for an Electrical Engineer to support the research and development of demonstrator and prototype radio frequency (RF) test and evaluation systems in support of HF radar programs. Position responsibilities will include, but are not limited to the following: Support the development, acquisition, deployment, and maintenance of RF test and evaluation equipment for HF radar projects Assist with the planning and execution of RF-related field operations Evaluate system performance and recommend design improvements to enhance functionality and resolve technical issues Utilize computer-aided engineering tools to support design, analysis, and testing activities Support integration efforts across hardware and software systems to ensure overall system performance Participate in the...

Description: Electrical Engineer - Systems Integration/Test - Level 4 We are Lockheed Martin The Electronic Hardware Design (EHD) team develops flightworthy safety critical electronic hardware, embedded software, FPGAs, and test equipment for LM Aero aircraft programs and related needs. We are a co-located team of electrical, mechanical, software, test, and project management engineers under one manager. These EHD disciplines develop requirements, produce detailed designs, qualify, document, develop test equipment for, and establish production build to print suppliers for the products it develops. Responsible for the development and verification of flightworthy safety critical electronic circuit cards, FPGAs, and related test equipment. Will work closely with embedded software engineers, mechanical engineers, specialty engineering, and test engineers integrating the software, hardware, and test stations. May also develop automated test capabilities enabling hardware and...

Description SAIC is seeking a Senior Electrical Engineer to join in and support our team in Panama City Beach, Florida. JOB DESCRIPTION: You will be working in a dynamic environment at our Holley Engineering and Integration Center. You will be supporting multiple Navy projects of various scales and multiple contracts. You will hone your leadership skills and gain engineering experience rapidly. JOB DUTIES: Use your expertise to provide guidance on a variety of technical projects. Design electrical systems, control systems, equipment and packages. Capture design requirements using MBSE principles. Conduct feasibility studies and testing of new and modified designs. Direct support personnel in the preparation of detailed design, documentation, testing and prototype fabrication. Provide design information to drafting for technical documentation team. Provide direct support to the program manager on technical issues. Prepare variance documentation as required to...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary: SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. SAIC is looking for someone to support the MK710 program here at the SAIC Middletown office. The job will entail a complex/detailed troubleshooting effort along with full redesign engineering effort. Location: The work will be at both 28 Jacome Way, Middletown, RI, and the Naval Undersea Warfare Center (NUWC) Division Newport. Work Schedules: Flexible work schedule...

Description SAIC is seeking an organized and motivated Electrical Engineer Design Lead to lead a team of their peers towards the development of complex Automated Test Equipment (ATE) systems for the Navy in Middletown, RI. The ideal candidate brings broad electrical engineering experience and skillsets with some project management experience, and familiarity with systems engineering to this position. You will lead the design, development, documentation and testing of complex Automated Test Equipment (ATE) systems for the Navy that consist of analog, digital, and power electronics, embedded systems such as FPGAs, commercial off the shelf (COTS) equipment such as AC and DC supplies, switching, and instrumentation, National Instruments (NI) PXI, and cRio, systems, extensive cabling and interconnection, Virginia Panel Corporation (VPC) Mass Interconnect systems, and LabVIEW and Test Stand software. You will lead and work alongside your team of mixed electrical and...

Description SAIC is seeking an Electrical Engineer to support the US Navy in Indianapolis, IN. JOB DESCRIPTION: The electrical engineer will complete tasking related to the design, manufacture and sustainment of US Navy Aircraft Equipment, related systems, and other military systems in support of its Indianapolis facility. The ideal engineering candidate is expected to have a strong background in the use and application of technical standards, principles, theories, concepts and techniques for designing circuits, analyzing electronic systems, and troubleshooting electronic and electrical constructs. The engineering candidate is also expected to be able to work independently, will mentor and give guidance to lower level electrical engineers, and will be able to review their work and help them improve their skills. JOB DUTIES: Tasking will include but will not be limited to design, development, modification, evaluation and test of a variety of electronic equipment and...