23 flight test engineer jobs found

Description: This is a place for engineers, scientists, and problem-solvers who are ready to engage deeply, think critically, and build with purpose. You will not just launch a career. You will be part of something bigger. This is where the best are built. The Fleet Ballistic Missile (FBM) program is seeking an entry level Electronics Engineer to develop Automated Test Equipment. Location: This position does not support teleworking; the preferred candidate will be located near our Lockheed Martin Space facility at one of the Coolest places to work: Cape Canaveral FL and be expected to work a flexible 9x80 schedule in the office full-time. What does this role look like? You will support FBM LE refresh and design update projects for Electrical Ground Support Equipment (EGSE). Use your strong electrical engineering skills to work with all project partners and define the future for FBM! Key activities you will accomplish in this role: • Participate in requirements analysis,...

Description: What You Will Be Doing You will be a Strategic Software, Staff with the ability to capture/derive requirements and perform CSCI/CSC/CSU decomposition, detailed design work, and bench level testing. Candidate will perform requirements capture through detailed design, implementation, and integration of a new System on a Chip (SoC) design for Block 1.1. Candidate will be responsible for supporting all data link software design including the following specialty capabilities: RF waveform implementation and incorporation of Simulink Coder into software, cryptographic algorithm development and debug, and low-speed messaging and communication with external peripherals. Prior experience with Microchip SoC’s, Xilinx SoC’s, UVM, and GitLab is preferred. As a Staff Software Engineer, your responsibilities will include but are not limited to: • Develop and maintain embedded software applications and/or desktop applications. • Tasks will involve requirement, design, code,...

Description: Lockheed Martin Space is seeking an ElectroMechanical Staff Engineer at Kennedy Space Center, Florida to oversee the fabrication and integration of harness subsystems for the Orion Spacecrafts and provide floor support for Electrical Integration of wiring products. Location: This position does not support teleworking ; the selected candidate will be located near our Lockheed Martin Space facility in: Kennedy Space Center FL where you will be working a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology...

Description: You will be the System Integration, Test, and Evaluation (IT&E) Engineer to support a program's system integration and system qualification initiatives in Orlando, FL. Our team is responsible for executing sub-system and system level integration and tests for new and existing products. What You Will Be Doing As the IT&E Engineer, you will be responsible for working in the laboratory onsite: • Generating and executing sub-system and system level integration and test plans/procedures • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide...

Description: Lockheed Martin Missiles and Fire in Orlando, FL is seeking an experienced Integration, Test, and Evaluation (IT&E) Engineer to support missile and sensor development programs. Our team is dedicated to delivering innovative solutions, and you will play a key role in supporting the test series leading up to flight testing. What You Will Be Doing The selected Integration, Test, and Evaluation (IT&E) Engineer will lead subsystem and system-level integration and testing, use of test equipment during missile processing, and preparation of test related documentation. The candidate will lead a team in the planning and execution of the development, qualification and integration test effort, to include subsystems and missile level activities. This role will also require the candidate to oversee the assembly and test of mockup missiles and live ordnance flight test missiles. The candidate will work under only general direction reporting to a program IT&E Lead....

Description: You will be the Circuit Card Design Engineer (GPS M-Code IPT Lead) for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer (GPS M-Code IPT Lead) you will drive the architecture, schematic capture, and EPCAD layout for complex circuit cards. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of a control module design. • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for complex circuit cards. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for complex systems • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing schematics and...

Description: You will be the Electromechanical Engineer for the Hardware Engineering team within Missiles & Fire Control (MFC). Our team delivers the high reliability electronic packaging, harnesses, and enclosures that power missile and radar systems for the United States and allied militaries. What You Will Be Doing As the ElectroMechanical Engineer you will own the end to end development and production of electromechanical hardware on one or more defense programs. You’ll lead cross functional teams, mentor junior engineers, and ensure every design meets strict size, weight, power, and environmental requirements. Your responsibilities will include: • Leading hardware development and production efforts, driving schedules, quality, and cost targets. • Designing CCA/PWB packages, harness assemblies, and electronic enclosures; creating detailed 3 D models, 2 D drawings, and layout documents in Windchill/CREO. • Selecting materials, components, and manufacturing processes...

Description: Lockheed Martin Missiles and Fire Control is looking for an experienced Mechanical Design Engineer to support development and production of a missile system. What You Will Be Doing: As the Mechanical Engineering Designer Staff, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: Developing and generating CREO layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM Coordinating the IPT team, suppliers, GSC, electronic packaging, optics, and structural/thermal/material analysts to ensure design excellence...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. This is an exciting opportunity to work on the Fleet Ballistic Missile Program (FBM), a...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. This is an exciting opportunity to work on the Fleet Ballistic Missile Program (FBM), a...

Description: You will be the Electromechanical Design Engineer for the Ignition Safety device (ISD) for the PrSM team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ISD (Ignition Safety device) packaging that will serve as the common ISD backbone for PrSM. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ISD • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials, obtaining vendor...

Description: You will be a Systems Integration and Test Senior Engineer for Lockheed Martin's Missiles & Fire Control division. Our team is responsible executing Lab, Ground, and Flight testing to ensure successful development and deployment of critical systems for Platform Expansion (PEX). What You Will Be Doing As the IT&E Engineer, you will be responsible for the following: • Generating and executing sub-system and system level integration and test plans/procedures • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide engineering evaluations of redesigns...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. We are seeking an RF Systems Analysis Engineer for Lockheed Martin, supporting RF simulation analysis, antenna test data analysis, and captive flight test performance data analysis. Our team is responsible for ensuring the performance of passive RF sensor systems, and you will play a key role in analyzing and evaluating sensor performance. What You Will Be Doing As the RF Systems Analysis Engineer, you will be responsible for: • Conducting RF requirements analyses and executing trade studies to optimize system performance • Analyzing test data, including signal...

Description: You will be the ARRW Mechanical Design Engineer Staff for the Missiles & Fire Control – ARRW Program. Our team is developing the first hypersonic missile to enter low rate production. What You Will Be Doing As the Mechanical Engineer for the Booster/All Up Round (AUR) you will be the primary mechanical engineering point of contact for ARRW LRIP and ARRW Incremental development. You will work closely with Glider mechanical engineering, AUR electrical engineering, and systems engineering to translate requirements into releasable technical data packages (TDPs). Your responsibilities will include: • Developing and generating CREO layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles • Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM • Coordinating the IPT team, suppliers, GSC, electronic packaging, optics, and structural/thermal/material analysts to ensure design...

Description: You will be the Electromechanical Design Engineer for the Common Command Flight Termination System (FTS) team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ESAF (Electronic Safe and Arm Fuze) packaging that will serve as the common ESAF backbone for every new FTS. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ESAF • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials,...

Description: You will be the Senior ElectroMechanical Engineer on the Advanced Programs hardware engineering team within Lockheed Martin Missiles & Fire Control (MFC). Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries. You’ll work on cutting edge electronics packaging, hands on prototype builds, production support, and technical leadership that directly impact next generation missile and radar programs. What You Will Be Doing As the Senior ElectroMechanical Engineer you will act as a key technical contributor on one or more defense programs, guiding hardware from concept through low rate production and full rate manufacturing. You’ll lead cross functional teams, create detailed electromechanical models and drawings, define test criteria, and drive issue resolution while mentoring junior engineers and championing an inclusive, collaborative culture. Your responsibilities will include: • Lead...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. We are seeking an RF Systems Analysis Engineer for Lockheed Martin, supporting RF simulation analysis, antenna test data analysis, and captive flight test performance data analysis. Our team is responsible for ensuring the performance of passive RF sensor systems, and you will play a key role in analyzing and evaluating sensor performance. What You Will Be Doing As the RF Systems Analysis Engineer, you will be responsible for: • Conducting RF requirements analyses and executing trade studies to optimize system performance • Analyzing test data, including signal...

Description: You will be a Systems Integration and Test Engineer for Lockheed Martin's Missiles & Fire Control division. Our team is responsible executing Lab, Ground, and Flight testing to ensure successful development and deployment of critical systems. What You Will Be Doing As the IT&E Engineer, you will be responsible for the following: • Generating and executing sub-system and system level integration and test plans/procedures • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide engineering evaluations of redesigns or upgrades to the existing missile...

Description: You will be the Electromechanical Design Engineer for the Common Command Flight Termination System (FTS) team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ISD (Ignition Safety device) packaging that will serve as the common ISD backbone for every new FTS. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ISD • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials,...