110 manufacturing jobs found

Description: You will be the 3rd Shift Manufacturing Engineer - CNC Machining for the Manufacturing team. Our team is responsible for delivering high‑quality machined components that meet rigorous engineering and customer requirements. What You Will Be Doing As the Manufacturing Engineer - CNC Machining you will be responsible for creating, revising, and validating CNC machining programs that drive efficient, repeatable production. Your responsibilities will include, but are not limited to: Develop and revise CNC machining programs to meet engineering, quality, and efficiency standards. Verify programs through prove‑outs on production machines and ensure proper work‑holding and tooling specifications. Create and update manufacturing work instructions while troubleshooting production issues on the shop floor. Train machine operators and support acquisition/installation of new equipment to enable rate increases and continuous improvement. Why Join...

Description: You will be the 3rd Shift Manufacturing Controls/Robotics Engineer for the Robotics Engineering Team. Our team is responsible for delivering cutting‑edge automated manufacturing solutions that enable high‑rate production of missiles, launch systems, and ground vehicles. What You Will Be Doing As the Manufacturing Controls/Robotics Engineer you will be responsible for concept, design, and documentation of automated manufacturing equipment that supports site processes and meets production‑rate goals. Your responsibilities will include, but are not limited to: Troubleshoot and resolve existing electrical controls equipment such as PLCs, AC & DC motors, servo drives, and variable frequency drives. Improve existing controls equipment to enhance safety, productivity, and efficiency. Develop electrical automation designs from hardware specifications into complete construction packages for fabrication, assembly, checkout, and startup. Create...

Description: You will be the Robotics/Controls Engineer Staff for the Robotics and Controls Engineering Team. Our team is responsible for design, development, and support of automated manufacturing equipment. What You Will Be Doing As the Robotics Engineer Staff you will be responsible for leading the concept, design, and documentation of automated manufacturing equipment to meet production‑rate requirements. Your responsibilities will include, but are not limited to: Troubleshoot and resolve PLCs, AC/DC motors, servo drives, VFDs, and HMIs. Improve existing controls to enhance safety, productivity, and efficiency. Develop complete electrical automation packages from specifications through checkout and startup. Create and maintain control drawings using CAD software. Collaborate with engineering, quality, safety, IT, and other stakeholders to deliver best‑practice solutions. Why Join Us We seek a collaborative engineer with a strong...

Description: As a Manufacturing Engineering Sr Stf within IGNITE, you will work in the Severn Operations Manufacturing Team providing support to internal and external customers. We're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. Key Responsibilities: • Manufacturing concept and process solutions for production applications cover advanced technologies including but not limited to composites fabrication, assembly, automation, inspection, direct part manufacturing, emerging technologies, as well as digital capabilities. • Analyzes, researches, designs and develops materials and their related fabrication and application processes to develop and optimize materials for use in engineering...

Description: WHAT WE’RE DOING At Sikorsky, a Lockheed Martin Company, we are at the forefront of aerospace innovation, driving the development and deployment of cutting-edge technology in the field of aviation. We solve the great problems of our times and innovative technologies that define eras. While no one knows what's going to change the world next, our people are already working on it. THE WORK This position is for a Senior Manufacturing Engineer working in the Aerostructures Manufacturing Engineering group FMC Product Center as a CNC Programmer/ME. Candidate needs to have a strong CNC programing background as well as Manufacturing Engineering and processing background. Responsible for developing and writing programs for numerically controlled extrusion milling machines using engineering specifications and drawings. Our team is responsible for ensuring that parts are machined accurately and efficiently, and that programs are optimized for production. As a key...

Description: You will be the Manufacturing Controls/Robotics Engineer for the Robotics Engineering Team. Our team is responsible for delivering cutting‑edge automated manufacturing solutions that enable high‑rate production of missiles, launch systems, and ground vehicles. What You Will Be Doing As the Manufacturing Controls/Robotics Engineer you will be responsible for concept, design, and documentation of automated manufacturing equipment that supports site processes and meets production‑rate goals. Your responsibilities will include, but are not limited to: Troubleshoot and resolve existing electrical controls equipment such as PLCs, AC & DC motors, servo drives, and variable frequency drives. Improve existing controls equipment to enhance safety, productivity, and efficiency. Develop electrical automation designs from hardware specifications into complete construction packages for fabrication, assembly, checkout, and startup. Create design...

Description: This is a challenging and rewarding position with a mission to support the manufacturing of circuit card assemblies. This opportunity involves working as part of the Surface Mount Assembly Laboratory team to hand build prototypes & legacy assemblies for internal & external customers. The preferred candidate will have: •Ability to obtain and maintain a security clearance •Ability to understand and interpret assembly drawings, bills of material, assembly schematics, shop travelers, & work instructions. An eye for detail and a commitment to quality is essential. •Basic understanding of electronic & mechanical components. •Basic understanding of printed circuit boards (PCB’s). •Ability to populate / rework circuit boards with SMT components, thru-hole components, press fit components, install odd form components (connectors, heatsinks, hardware, etc.), routing & staking of wires. • Experience with soldering irons, hot air, hot tweezers, hot...

Description: You will be the Manufacturing Engineer Stf - CNC Machining for the Manufacturing team. Our team is responsible for delivering high‑quality machined components that meet rigorous engineering and customer requirements. What You Will Be Doing As the Manufacturing Engineer Stf - CNC Machining you will be responsible for creating, revising, and validating CNC machining programs that drive efficient, repeatable production. Your responsibilities will include, but are not limited to: Develop and revise CNC machining programs to meet engineering, quality, and efficiency standards. Verify programs through prove‑outs on production machines and ensure proper work‑holding and tooling specifications. Create and update manufacturing work instructions while troubleshooting production issues on the shop floor. Train machine operators and support acquisition/installation of new equipment to enable rate increases and continuous improvement. Why Join...

Basic Qualifications Requires a Bachelor’s degree in Electrical Engineering, or a related Science, Engineering or Mathematics field. Also requires 3+ years of job-related experience or a Master's degree plus 2 years experience.   CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required within a reasonable period of time. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Electrical Module Design Lead   As an Electrical Module Design Lead, you’ll guide an electrical team of 1-3 members and coordinate cross-functional teams, including mechanical, software, and systems experts. You’ll be responsible for hardware design from requirements analysis through schematic...

Basic Qualifications Requires a Bachelor’s degree in Electrical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.     CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position As an Electrical Hardware Design Engineer, you will be a key part of a cross-functional team responsible for designing complex and mission-critical systems. You will have the opportunity to be involved in all program phases, including requirements analysis, schematic capture, defining routing...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. Electronics design and test lead for a few IGNITE space research circuit card and cable...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for complex circuit cards. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for complex systems • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing schematics and...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will oversee technical execution, translate system requirements into subsystem designs, and create electrical interface and power distribution architectures. You will work closely with software, hardware and systems engineers, drive Integrated Master Schedule (IMS) tasking, manage procurement and testing, and guide the team through the Design Assurance process. Your responsibilities will include: • Developing detailed schematics, 3 D models and bill of materials for circuit card assemblies (CCAs) that meet size, weight, power and environmental constraints. • Performing signal integrity, power integrity and...

Description: You will be the Electromechanical Design Engineer for the Common Command Flight Termination System (FTS) team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ESAF (Electronic Safe and Arm Fuze) packaging that will serve as the common ESAF backbone for every new FTS. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ESAF • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials,...

Description: You will be the Electromechanical Design Engineer for the Missile & Radar Electronics Packaging team. Our team delivers rugged enclosures, chassis, cold plates, card guides, wedge locks, and interconnect assemblies that enable high performance missile and radar hardware to operate reliably in demanding environments. What You Will Be Doing As the Electromechanical Design Engineer you will create and mature the mechanical and thermal solutions that marry the electronics to their protective structures. You’ll partner with circuit card designers, suppliers, and manufacturing partners to turn concepts into production ready hardware. Your responsibilities will include: • Developing detailed 3 D models and 2 D drawings in PTC Creo (ASME Y14.5/GD&T) and maintaining configuration control in Windchill (PDM/PLM). • Coordinating with circuit card designers to verify that CCA form factors, component heights, and connector placements fit the mechanical chassis and...

Description: You will be the Senior ElectroMechanical Engineer on the Advanced Programs hardware engineering team within Lockheed Martin Missiles & Fire Control (MFC). Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries. You’ll work on cutting edge electronics packaging, hands on prototype builds, production support, and technical leadership that directly impact next generation missile and radar programs. What You Will Be Doing As the Senior ElectroMechanical Engineer you will act as a key technical contributor on one or more defense programs, guiding hardware from concept through low rate production and full rate manufacturing. You’ll lead cross functional teams, create detailed electromechanical models and drawings, define test criteria, and drive issue resolution while mentoring junior engineers and championing an inclusive, collaborative culture. Your responsibilities will include: • Lead...

Description: You will be the Senior Circuit Design Engineer for the Non Kinetic Air Defense (NKAD) & Counter Swarm team. Our team designs, prototypes, tests, and rapidly fields advanced electronic solutions that protect U.S. and allied forces. We turn high risk concepts into flight ready hardware on accelerated schedules. What You Will Be Doing As the Senior Circuit Design Engineer you will be responsible for leading end to end circuit card development—from early architecture through production release—while collaborating with system, software, test, and manufacturing partners. You will help shape the technical direction of multiple defense programs and ensure that every design meets strict SWaP C, performance, and reliability requirements. Your responsibilities will include: • Defining subsystem requirements, conducting trade studies, and establishing architecture for platform and sensor electronics. • Driving schematic capture, EPCAD layout, and signal integrity...

Description: You will be the Mechanical Design Engineer for the F 35 Electro Optical Targeting System (EOTS) team in Orlando, FL. Our team delivers cutting edge mechanical solutions that keep the F 35’s mission critical sensors operating flawlessly, driving innovation from concept through production. What You Will Be Doing As the Mechanical Design Engineer you will be responsible for turning tough production and design challenges into elegant, manufacturable solutions. Working side by side with production, hardware design, and analysis groups, you’ll create new parts, issue engineering changes, and supply the detailed data the supply chain needs to build and ship world class hardware. Your responsibilities will include: • Generating and maintaining 3 D solid models and 2 D drawings in the Digital Product Lifecycle Management (dPLM) environment. • Producing release ready engineering documents (drawings, BOMs, assembly parts lists) for fabrication and procurement. •...

Description: We are Lockheed Martin At Lockheed Martin Aeronautics, we're taking innovation to the next level. From designing the most advanced air vehicle to designing aircraft that defies gravity, our engineers live on the cutting edge of technology. Never have the opportunities for a technical career been so limitless. Lockheed Martin Aeronautics Company, home of the world-renowned Skunk Works®, turns visionary aircraft into reality and is known for building the finest military aircraft in the world. This recognition is continually earned through our commitment to relentless research and development of high-performance aircraft, continuously seeking innovative, low-cost design and manufacturing strategies, and delivering operational readiness for our customers' missions to ensure continued relevancy for the life cycle of our products. The Skunk Works (Lockheed Martin Advanced Development Program) is looking for world class talent in SYSTEMS FIELD ENGINEERING to be a part...

Description SAIC is seeking a Engineering Tech III to work with our Radar Restoration team in Bedford, IN. The candidate must be able to provide technical support for engineers working in such areas as research, design, development, testing, or manufacturing process improvement. Work pertains to electrical, electronic, or mechanical components or equipment. These technicians are required to have some practical knowledge of science or engineering. Some positions may require a practical knowledge of mathematics or computer science. The candidate must be familiar with mechanical and electrical concepts and applications and must have experience using testing equipment such as: volt/ohm meters, power supplies, micrometers, calipers and depth gauges along with other hand tools. Candidate will be operating in environments that could result in the use of ladders, scissor lifts and or man lifts. It is expected that the candidate will have some experience in dealing with mechanical and...