16 mission systems engineer jobs found

Description: You will be the System Engineer, Integration Lab Stf for the Skunk Works (Advanced Development Program) team which is responsible for turning visionary aircraft concepts into operational reality. What You Will Be Doing As the System Engineer, Integration Lab Stf you will be responsible for delivering hardware‑centric solutions that enable rapid system verification and testing. Your responsibilities will include: Perform system integration, test, and troubleshooting of hardware/software configurations. Design and integrate hardware equipment for the Systems Integration Labs (SIL). Establish Hardware‑In‑The‑Loop (HWIL) and closed‑loop development/testing in the SIL. Interface with software developers, systems engineers, and customers to support verification activities. Maintain design documentation and adhere to configuration‑management requirements. What’s In It For You We are committed to supporting your work‑life balance...

Description: You will be the Systems Engineer Sr. Integration and Test for the Architecture, Design, Integration & Test (ADIT) team within the Systems Integration & Test (SI&T) which is responsible for … What You Will Be Doing As the Systems Engineer Sr. Integration and Test you will be responsible for leading system‑level software testing initiatives, crafting test strategies, and ensuring integration quality across complex platforms. "Your responsibilities will include:" Develop and execute comprehensive test plans and procedures for system‑level software. Analyze test data, identify defects, and drive corrective actions. Collaborate with architects, designers, and developers to validate integration requirements. Maintain test environments and tools to support continuous testing. Provide clear reporting and recommendations to stakeholders on test outcomes. What’s In It For You "We are committed to supporting your work‑life...

Description: You will be the Systems Engineer Sr. Integration and Test for the Architecture, Design, Integration & Test (ADIT) team within the Systems Integration & Test (SI&T) which is responsible for … What You Will Be Doing As the Systems Engineer Sr. Integration and Test you will be responsible for leading system‑level software testing initiatives, crafting test strategies, and ensuring integration quality across complex platforms. "Your responsibilities will include:" Develop and execute comprehensive test plans and procedures for system‑level software. Analyze test data, identify defects, and drive corrective actions. Collaborate with architects, designers, and developers to validate integration requirements. Maintain test environments and tools to support continuous testing. Provide clear reporting and recommendations to stakeholders on test outcomes. What’s In It For You "We are committed to supporting your work‑life...

Description: You will be the Software Engineer, Modeling & Simulation for the Simulation & Systems Labs (SSL) which is responsible for... What You Will Be Doing As the Software Engineer, Modeling & Simulation you will be responsible for integration and troubleshooting of Shared Simulation Software (SSS) products in hardware‑in‑the‑loop and man‑in‑the‑loop lab environments, driving development and deployment of real‑time simulation capabilities. Your responsibilities will include: Design, develop, and integrate software for distributed, real‑time simulation systems. Execute integration and testing of SSS software across hardware‑in‑the‑loop and man‑in‑the‑loop labs. Apply simulation software engineering principles and technical concepts to reuse existing software and support digital transformation. Collaborate within an Agile, DevSecOps team to deliver high‑quality solutions that meet evolving customer needs. What’s In It For You We...

Description: You will be the Systems Engineer Sr for the for the Architecture, Design, Integration & Test (ADIT) team within the Systems Integration & Test (SI&T). Our team is responsible for systems level software testing. What You Will Be Doing As the Systems Engineer for the for the Architecture, Design, Integration & Test (ADIT) team you will perform technical test planning and execution. Responsibilities will include: • Generation of test plan and test procedure documentation • Coordination of test objectives • Execution across agile development teams. The 5th Gen Platforms SI&T team performs mission system capability integration and maturation, verification and validation testing and regression testing for F-35. Testing is generally at the system level and performed in hardware in the loop venues as well as software development labs executing both manual and automated testing. Integration and test will sometimes require candidates to work...

Description: You will be the Systems Engineer Integration and Test for the Architecture, Design, Integration & Test (ADIT) team which is responsible for... What You Will Be Doing As the Systems Engineer Integration and Test you will be responsible for technical test planning and execution, guiding test objectives, and collaborating across agile development teams. Your responsibilities will include: Generate test plan and test procedure documentation. Coordinate test objectives with stakeholders. Execute testing across agile development teams. Report test results and provide recommendations for improvement. What’s In It For You We are committed to supporting your work-life balance and overall well-being, offering flexible scheduling options. Learn more about Lockheed Martin’s comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for the Next Gen Short Range Interceptor (NGSRI) program. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for the Guidance Electronic Components Assembly (GECA). • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and...

Description: You will be the Circuit Card Design Engineer for the Missile & Fire Control (MFC) – Next Gen Short Range Interceptor (NGSRI) team. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems running reliably in harsh, radiation rich environments. What You Will Be Doing As the Circuit Card Design Engineer you will lead the architecture, schematic capture, and layout of multiple circuit card assemblies for the NGSRI Guidance Electronic Components Assembly (GECA). You will partner with cross functional engineers to drive designs through the Design Assurance process, from concept through procurement and test. Your responsibilities will include: • Developing and refining system, performance, interface, and environmental requirements for GECA circuit cards. • Capturing schematics and coordinating with EPCAD for layout and signal routing optimization. • Conducting trade studies to evaluate design options and...

Description: Lockheed Martin Missiles and Fire control is seeking an early career Systems Integration Engineer who will be supporting hardware and software integration for the PAC-3 Missile. The candidate will be involved in the verification and validation for new test sets as well as actively involved in missile testing throughout the life of the product. The candidate must have knowledge of electrical engineering in the areas of digital, analog, radio frequency circuit designs or electronic components. This position requires to travel to test sites for both Outside Continental United States (OCONUS) and Continental United States (CONUS). For OCONUS activities, the candidate will travel to multiple locations around the world and perform site survey, inspection, and testing. For CONUS activities, the candidate will travel to locations such as White Sands Missile Range, NM to support flight test and production sites in Lufkin, TX and Camden, AR to support hardware troubleshooting....

Description: Lockheed Martin Missiles and Fire in Grand Prairie, TX is seeking an experienced Integration, Test, and Evaluation (IT&E) Engineer to support an advanced program missile and subsystem ground testing series. Our team is dedicated to delivering innovative solutions, and you will play a key role in supporting the test series leading up to flight testing. What You Will Be Doing As the Integration, Test, and Evaluation (IT&E) Ground Test Engineer will support subsystem integration and testing, use of automated test equipment during missile processing, and preparation of test related documentation. The candidate will support the development of procedures for missile functional testing using automated test equipment. This role will also require the candidate to support the assembly and test of mockup missiles and live ordnance flight test missiles. The candidate will work under only general direction reporting to a program IT&E Lead. The candidate will...

Description: Lockheed Martin Missiles and Fire control is seeking a Mid-career Systems Integration Engineer who will be supporting hardware and software integration for the PAC-3 Missile. The candidate will be involved in the verification and validation for new test sets as well as actively involved in missile testing throughout the life of the product. The candidate must have knowledge of electrical engineering in the areas of digital, analog, radio frequency circuit designs or electronic components. This position requires to travel to test sites for both Outside Continental United States (OCONUS) and Continental United States (CONUS). For OCONUS activities, the candidate will travel to multiple locations around the world and perform site survey, inspection, and testing. For CONUS activities, the candidate will travel to locations such as White Sands Missile Range, NM to support flight test and production sites in Lufkin, TX and Camden, AR to support hardware troubleshooting....

Description: You will be an Engineering Aide at Lockheed Martin, providing technical support to engineering on a variety of technical tasks that provides high quality electronic and electromechanical assemblies. Our team supports both Engineering and Manufacturing operations, ensuring reliable hardware for critical defense programs. What You Will Be Doing As an Engineering Aide you will be working with Engineering and Manufacturing teams in a fast-paced environment supporting new and current programs. Specific tasks include assembly of Unmanned Aerial Vehicle (UAV) mechanical and electrical subsystems and systems. The fabrication of wiring harnesses will require connector pinning, de-pinning, and applying mounting hardware. In addition, this position has opportunities to build drone assemblies and may at times be expected to test and fly the assemblies built. This position will provide the opportunity for the candidate to work as individual contributor, in a team...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and looking for a Design Verification Testing Lead Engineer for our beautiful Grand Prairie, TX site! You will be the Design Verification Testing (DVT) Lead Engineer for the RF Sensor Product Center (RFSPC) in testing across various missile flight environments, ensuring the development of reliable and robust products. This candidate will be responsible for planning, executing, and analyzing DVT activities, as well as developing a comprehensive plan for production latent manufacturing defect testing. The successful candidate will work closely with cross-functional teams,...

Description: You will be the RF Engineering Associate Manager - F16 Radar for the IFG F-16 Radar team which is responsible for advancing radar capabilities on the F‑16 platform. What You Will Be Doing As the RF Engineering Associate Manager - F16 Radar you will be responsible for leading a high‑performing engineering team to deliver cutting‑edge radar subsystems that enable superior mission outcomes. Your responsibilities will include: Lead the research, design, development, integration, testing, production, and sustainment of Radar subsystems for F‑16 aircraft. Drive effective project, problem‑resolution, and risk‑management practices. Translate customer needs into system and subsystem requirements and develop statements of work. Coordinate with suppliers, internal groups, and customers to create compelling proposals. Mentor and develop engineers, set clear performance expectations, and support career growth. What’s In It For You We are...

Basic Qualifications Candidates should demonstrate a thorough understanding of engineering technology.  Engineering Interns must be enrolled in an accredited degree program in Computer Engineering, Systems Engineering, Software Engineering, Electrical Engineering, Mechanical Engineering or other related scientific or technical discipline with a preference for a standing of a sophomore or higher.     Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position What you’ll experience: Collaborate with experienced teams on technical software and systems projects Enjoy a flexible work environment with recognition for your contributions Enhance your skills and gain real-world experience Competitive wage for your efforts What you bring to the table: Enrolled in a Software Engineering, Information Technology, or Systems Engineering program Interest in...

Basic Qualifications Candidates should demonstrate a thorough understanding of engineering technology.  Engineering Interns must be enrolled in an accredited degree program in Computer Engineering, Systems Engineering, Software Engineering, Electrical Engineering, Mechanical Engineering or other related scientific or technical discipline with a preference for a standing of a sophomore or higher.     Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position What you’ll experience: Collaborate with experienced teams on technical software and systems projects Enjoy a work environment with recognition for your contributions Enhance your skills and gain real-world experience in systems integration and SAFe project delivery Competitive wage for your efforts What you bring to the table: Enrolled in a Software Engineering, Information Technology, Computer...