22 production test engineer jobs found

Description: You will be the Electrical Engineering Senior for the Air Launched Rapid Response Weapon (ARRW) Low Rate Initial Production (LRIP) team. Our team drives reliability across production, troubleshoots hardware issues, and partners with suppliers to guarantee that every circuit delivers mission critical performance. What You Will Be Doing As the senior electrical engineer you will serve as the technical liaison for the ARRW Vehicle Management Computer (VMC). You’ll thrive in a fast paced production environment, delivering rapid, accurate solutions while collaborating with engineering, test, and manufacturing groups. Travel averages 50 % of your time for a 12 month stint in Los Angeles, CA, giving you exposure to both field and office settings. Your responsibilities will include: • Acting as the primary point of contact for VMC hardware across the LRIP effort. • Performing electrical testing, firmware/FPGA verification, and electro mechanical packaging reviews to...

Description: You will be the Electromechanical Engineer for the Missiles & Fire Control (MFC) Carrier Card Assembly (CCA) team. Our team creates the mechanical electrical hardware that powers advanced missile systems and supports production line delivery for U.S. and allied defense programs. What You Will Be Doing As the Electromechanical Engineer you will develop innovative electromechanical concepts, generate production ready documentation, and provide hands on support throughout the build to field process. You’ll work independently when needed and collaborate closely with a wide range of specialists to keep designs on schedule and compliant. Your responsibilities will include: • Designing and detailing electromechanical systems and CCA components, including material, component, and process selection. • Creating 3 D layouts, 2 D drawings, and all required engineering deliverables in Windchill. • Coordinating with structural, thermal, configuration management,...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Command Launch Assembly (CLA) FPGA team within Missiles & Fire Control (MFC). Our team delivers the digital heart beat that powers the Next Generation Short Range Interceptor (NGSRI), turning system level performance and safety goals into reliable, production ready FPGA hardware for the United States and allied forces. What You Will Be Doing As the senior ASIC & FPGA designer you will own the full lifecycle of the CLA FPGA—from high level architecture through release ready documentation—while mentoring junior talent and partnering with a broad set of cross functional experts. Your responsibilities will include: • Defining FPGA architecture and drafting design specifications; writing clean RTL in VHDL/Verilog/SystemVerilog that satisfies performance, power, and reliability targets. • Developing synthesis, place and route, and timing closure strategies to guarantee deterministic operation on the...

Description: You will be the FPGA Design Engineer Lead for the Programmable Logic Design organization within Missiles & Fire Control (MFC). Our team defines the digital backbone of precision engagement aerospace and defense systems for the United States and allied militaries, delivering high performance FPGA/ASIC solutions that meet rigorous aerospace standards. What You Will Be Doing As the FPGA Design Engineer Lead you will act as the recognized technical authority for FPGA and ASIC development across the MFC portfolio. You’ll translate system requirements into production ready architectures, mentor engineers, and steer the strategic direction of programmable logic capabilities. Your responsibilities will include: • Owning end to end development of sophisticated FPGA/ASIC architectures—from capture of requirements through production release. • Defining, designing, verifying, and implementing logic using VHDL/Verilog in AMD Vivado, Intel Quartus, or equivalent...

Description: Lockheed Martin Missiles and Fire in Orlando, FL is seeking an experienced Integration, Test, and Evaluation (IT&E) Engineer to support missile and sensor development programs. Our team is dedicated to delivering innovative solutions, and you will play a key role in supporting the test series leading up to flight testing. What You Will Be Doing The selected Integration, Test, and Evaluation (IT&E) Engineer will lead subsystem and system-level integration and testing, use of test equipment during missile processing, and preparation of test related documentation. The candidate will lead a team in the planning and execution of the development, qualification and integration test effort, to include subsystems and missile level activities. This role will also require the candidate to oversee the assembly and test of mockup missiles and live ordnance flight test missiles. The candidate will work under only general direction reporting to a program IT&E Lead....

Description: Job Description : Lockheed Martin is seeking a Mechanical Engineer Associate in Orlando, FL. You will be the Mechanical Engineering Design supporting development and production of sensors and missile systems. What You Will Be Doing: As the Mechanical Engineering Designer Asc, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: * Developing and generating CREO layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles * Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM * Coordinating with the IPT team, suppliers, GSC, electronic packaging, optics, and...

Description: You will be the ARRW Mechanical Design Engineer Staff for the Missiles & Fire Control – ARRW Program. Our team is developing the first hypersonic missile to enter low rate production. What You Will Be Doing As the Mechanical Engineer for the Booster/All Up Round (AUR) you will be the primary mechanical engineering point of contact for ARRW LRIP and ARRW Incremental development. You will work closely with Glider mechanical engineering, AUR electrical engineering, and systems engineering to translate requirements into releasable technical data packages (TDPs). Your responsibilities will include: • Developing and generating CREO layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles • Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM • Coordinating the IPT team, suppliers, GSC, electronic packaging, optics, and structural/thermal/material analysts to ensure design...

Description: You will be the Senior Circuit Design Engineer for the Command Launch Assembly (CLA) Carrier Card Assembly (CCA) team within Missiles & Fire Control (MFC). Our team delivers the high performance electronic hardware that powers the Next Generation Short Range Interceptor (NGSRI) and other precision engagement systems for the United States and allied forces. What You Will Be Doing As the Senior Circuit Design Engineer you will own the end to end design of the CCA, translating system requirements into reliable, production ready circuit cards that power, communicate with, and integrate into the launcher’s subsystems. You will work hand in hand with mechanical, electrical, and systems engineers, perform verification and validation, and ensure every design meets rigorous power conditioning, signal integrity, and environmental standards. Your responsibilities will include: • Defining performance, power, and interface requirements for the CCA and documenting them in...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Programmable Logic Design team supporting the Next Generation Short Range Interceptor (NGSRI). Our team creates the digital heart beats—ASICs and FPGAs—that enable precision engagement aerospace and defense systems for the United States and allied forces. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will own the architecture, development, verification, and delivery of the Datalink FPGA that powers the NGSRI. You’ll translate system level performance, safety, and reliability goals into robust, production ready logic while mentoring junior talent and collaborating across disciplines. Your responsibilities will include: • Defining architecture and design specifications for programmable logic components; writing clean, well documented RTL in VHDL/Verilog/SystemVerilog. • Developing synthesis, place and route, and timing closure strategies to achieve deterministic operation on...

Description: Lockheed Martin Missiles and Fire Control is looking for a Mechanical Engineering Design to support the development and production of a missile system. What You Will Be Doing: As a Mechanical Engineering Design Engineer, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: * Developing and generating CREO layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles * Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM * Coordinating with the IPT team, suppliers, GSC, electronic packaging, optics, and structural/thermal/material analysts to ensure design excellence...

Description: You will be the Electromechanical Design Engineer for the Missile & Radar Electronics Packaging team. Our team delivers rugged enclosures, chassis, cold plates, card guides, wedge locks, and interconnect assemblies that enable high performance missile and radar hardware to operate reliably in demanding environments. What You Will Be Doing As the Electromechanical Design Engineer you will create and mature the mechanical and thermal solutions that marry the electronics to their protective structures. You’ll partner with circuit card designers, suppliers, and manufacturing partners to turn concepts into production ready hardware. Your responsibilities will include: • Developing detailed 3 D models and 2 D drawings in PTC Creo (ASME Y14.5/GD&T) and maintaining configuration control in Windchill (PDM/PLM). • Coordinating with circuit card designers to verify that CCA form factors, component heights, and connector placements fit the mechanical chassis and...

Description: You will be the Senior ElectroMechanical Engineer on the Advanced Programs hardware engineering team within Lockheed Martin Missiles & Fire Control (MFC). Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries. You’ll work on cutting edge electronics packaging, hands on prototype builds, production support, and technical leadership that directly impact next generation missile and radar programs. What You Will Be Doing As the Senior ElectroMechanical Engineer you will act as a key technical contributor on one or more defense programs, guiding hardware from concept through low rate production and full rate manufacturing. You’ll lead cross functional teams, create detailed electromechanical models and drawings, define test criteria, and drive issue resolution while mentoring junior engineers and championing an inclusive, collaborative culture. Your responsibilities will include: • Lead...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. What You Will Be Doing Lockheed Martin is seeking an RF Engineer, for the planning and completion of the product baseline development, integration, and verification efforts, as well as the planning and execution of current and future changes. The candidate will work extensively with suppliers to develop and execute qualification testing schemes and provide requirement verification artifacts. The candidate will need to closely collaborate with internal LM stakeholders as well as U.S Government representatives to ensure all requirements are met. Essential tasks...

Description: Join Our Team as a Electronics Engineer, Power Support where you will work on the development of ground power systems for Electrical Ground Support Equipment for the Orion spacecraft supporting NASA’s manned Artemis missions. Location: This position does not support teleworking ; the selected candidate will be located near our Lockheed Martin Space facility in: Kennedy Space Center FL where you will be working a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. What You Will Be Doing Lockheed Martin is seeking an RF Engineer, for the planning and completion of the product baseline development, integration, and verification efforts, as well as the planning and execution of current and future changes. The candidate will work extensively with suppliers to develop and execute qualification testing schemes and provide requirement verification artifacts. The candidate will need to closely collaborate with internal LM stakeholders as well as U.S Government representatives to ensure all requirements are met. Essential tasks...

Description: You will be the Electrical Engineering Senior for the Air Launched Rapid Response Weapon (ARRW) Low Rate Initial Production (LRIP) team. Our team drives reliability across production, troubleshoots hardware issues, and partners with suppliers to guarantee that every circuit delivers mission critical performance. What You Will Be Doing As the senior electrical engineer you will serve as the technical liaison for the ARRW Vehicle Management Computer (VMC). You’ll thrive in a fast paced production environment, delivering rapid, accurate solutions while collaborating with engineering, test, and manufacturing groups. Travel averages 50 % of your time for a 12 month stint in Los Angeles, CA, giving you exposure to both field and office settings. Your responsibilities will include: • Acting as the primary point of contact for VMC hardware across the LRIP effort. • Performing electrical testing, firmware/FPGA verification, and electro mechanical packaging reviews to keep...

Description: You will be the Mechanical Design Engineer Sr for an Air Dominance development team. Our team is responsible for designing and producing key components of the missile system, including tactical and special test equipment hardware. What You Will Be Doing As the Mechanical Engineering Designer Sr, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: •Developing and generating CREO layouts and detailed model-based designs (MBD) for ICDs, components, sub-assemblies, assemblies, and integration test articles •Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM •Coordinating with the IPT team, suppliers, GSC,...

Description: Join the Lockheed Martin team in support of the US Navy's Fleet Ballistic Missile (FBM) D5 Life Extension (D5LE) Avionics/Test Missile Kit (TMK) Engineering. Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Titusville FL and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re...

Description: You will be the FPGA Design & Verification Engineer for the Lockheed Martin Advanced Technologies team. Our team creates cutting edge FPGA based solutions that power next generation defense and aerospace systems, delivering high performance computing, signal processing and real time control. What You Will Be Doing As the FPGA Design & Verification Engineer you will capture and derive system requirements, design, simulate and integrate FPGA architectures, and develop verification environments. You will troubleshoot existing designs, implement updates, and build new FPGA solutions from concept through production, working closely with the Programmable Logic Design Lead and cross functional engineers. Your responsibilities will include: • Translating system requirements into detailed FPGA designs, writing HDL code (SystemVerilog preferred, VHDL acceptable) and generating synthesis, placement, routing and timing constraints. • Developing self checking...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Laser Weapon System (LWS) Turret Closing team. Our team is responsible for delivering high performance, low latency FPGA based closed loop motor control solutions that enable rapid, precise turret positioning for next generation directed energy weapons. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will lead the end to end development of the FPGA motor control hardware, translating system level performance, safety and reliability requirements into a robust architecture, driving verification, hardware in the loop testing and integration, and shepherding the design from concept through production release. Your responsibilities will include: • Capturing and translating system level performance, safety and reliability requirements into a detailed FPGA architecture. • Developing and verifying RTL using SystemVerilog/Verilog and Xilinx/AMD toolsets, creating synthesis, timing and...