17 senior production test engineer jobs found

Description: Space and strategic defense systems operate in some of the most unforgiving environments imaginable. Success depends on precision — and thermal performance is often the difference between mission success and mission failure. At Lockheed Martin Space, we are redefining resilience and speed through our 21st Century Security® vision. We don’t just build systems — we engineer survivability, performance, and reliability into every component. As a Level 4 Thermal Engineer, you will serve as a technical leader driving the thermal architecture of advanced missile systems from concept through qualification and production. This position supports spacecraft, missile, hypersonic, or other advanced aerospace platforms operating in extreme and highly dynamic environments. If you’re looking for ownership, influence, and the opportunity to solve complex, high-consequence engineering challenges — this role is built for you. What does this role look like? As a senior member...

Description: Join us at Lockheed Martin as an ElectroMechanical Engineer where you will be responsible for product design, development, and production support for the enterprise mechanical ground packaging and non-flight cable design team. Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Littleton CO and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on...

Description: You will be the Senior Circuit Design Engineer for the Command Launch Assembly (CLA) Carrier Card Assembly (CCA) team within Missiles & Fire Control (MFC). Our team delivers the high performance electronic hardware that powers the Next Generation Short Range Interceptor (NGSRI) and other precision engagement systems for the United States and allied forces. What You Will Be Doing As the Senior Circuit Design Engineer you will own the end to end design of the CCA, translating system requirements into reliable, production ready circuit cards that power, communicate with, and integrate into the launcher’s subsystems. You will work hand in hand with mechanical, electrical, and systems engineers, perform verification and validation, and ensure every design meets rigorous power conditioning, signal integrity, and environmental standards. Your responsibilities will include: • Defining performance, power, and interface requirements for the CCA and documenting them in...

Basic Qualifications Bachelor's degree in Mechanical Engineering, or a related Science, Engineering or Mathematics field, plus a minimum of 2 years of relevant experience; or Master's degree, plus 6 months relevant experience.   CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As a senior mechanical engineer for regional strike, you'll be a member of a cross functional team working on projects that support some of our nations fundamental defense services. GDMS employees work closely with esteemed customers to develop solutions that...

Description: You will be the Mechanical Design Engineer for the GMLRS Development Team. Our team drives the design, build, and test of the Guided Multiple Launch Rocket System (GMLRS) missiles and launch pods, delivering new rocket configurations and supporting supplier development across the program. What You Will Be Doing As the Mechanical Design Engineer you will be responsible for creating and releasing component and assembly drawings, drafting Instructional Change Notices (ICNs), and coordinating hardware development from concept through flight testing. You’ll work side by side with cross functional partners, the Camden manufacturing group, and external suppliers to ensure designs meet schedule, performance, and safety targets. Your responsibilities will include: • Generate and release 2 D/3 D mechanical drawings for new rocket parts and assemblies. • Author and manage Instructional Change Notices for development builds. • Participate in weekly Integrated Product Team...

Description: You will be the Senior ElectroMechanical Engineer on the Advanced Programs hardware engineering team within Lockheed Martin Missiles & Fire Control (MFC). Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries. You’ll work on cutting edge electronics packaging, hands on prototype builds, production support, and technical leadership that directly impact next generation missile and radar programs. What You Will Be Doing As the Senior ElectroMechanical Engineer you will act as a key technical contributor on one or more defense programs, guiding hardware from concept through low rate production and full rate manufacturing. You’ll lead cross functional teams, create detailed electromechanical models and drawings, define test criteria, and drive issue resolution while mentoring junior engineers and championing an inclusive, collaborative culture. Your responsibilities will include: • Lead...

Description: You will be the Senior Circuit Design Engineer for the Non Kinetic Air Defense (NKAD) & Counter Swarm team. Our team designs, prototypes, tests, and rapidly fields advanced electronic solutions that protect U.S. and allied forces. We turn high risk concepts into flight ready hardware on accelerated schedules. What You Will Be Doing As the Senior Circuit Design Engineer you will be responsible for leading end to end circuit card development—from early architecture through production release—while collaborating with system, software, test, and manufacturing partners. You will help shape the technical direction of multiple defense programs and ensure that every design meets strict SWaP C, performance, and reliability requirements. Your responsibilities will include: • Defining subsystem requirements, conducting trade studies, and establishing architecture for platform and sensor electronics. • Driving schematic capture, EPCAD layout, and signal integrity...

Description: You will be the Senior Process Safety Engineer for the Environmental Safety and Health team. Our team is responsible for ensuring safety compliance and risk mitigation across all programs at the Troy, Alabama Missiles and Fire Control facility. What You Will Be Doing As the Senior Process Safety Engineer, you will analyze new processes and technologies to identify risks, implement mitigation strategies to ensure compliance with ordnance safety requirements, and protect employees from potential hazards. You'll be expected to be hands on with daily interaction in the production manufacturing areas. Your key responsibilities will include, but are not limited to: Troubleshooting safety-related process equipment, identifying and assessing equipment and process risk through regular onsite inspections and meetings Working with data tracking and engineering software reviewing engineering drawings for hazards and risks Reviewing Manufacturing...

Description: Join us at Lockheed Martin as an ElectroMechanical Engineer where you will be responsible for product design, development, and production support for the enterprise mechanical ground packaging and non-flight cable design team. Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Littleton CO and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on...

Description: Join us at Lockheed Martin as an ElectroMechanical Engineer where you will be responsible for product design, development, and production support for the enterprise mechanical ground packaging and non-flight cable design team. Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Littleton CO and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on...

Basic Qualifications Requires a Bachelor’s degree in Mechanical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 2+ years of job-related experience, or a Master's degree and 6 months of job-related experience.   CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As a senior mechanical engineer for regional strike, you'll be a member of a cross functional team working on projects that support some of our nations fundamental defense services. GDMS employees work closely with esteemed customers to develop solutions that...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and we are looking for a Mechanical Engineer – Opto-Mechanical design in Orlando, FL. You will be the Mechanical Engineer – Opto Mechanical Design for the Missiles & Fire Control – Advanced Systems Team. Our team drives the creation of cutting edge missile and fire control hardware, delivering innovative optics, mechanisms and gimbal solutions from concept through production. What You Will Be Doing As the Mechanical Engineer you will own the end to end opto mechanical development for multiple programs, reporting to the Mechanical Design Senior Manager and partnering...

Description: What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. The Work We are seeking a Mechanical Engineer to join the Mechanical Cabinet Design group in the Sensor Mechanical Design Center. In this role, the selected candidate will work as part of an engineering team to responsible for the design, analysis, verification, and production support of mechanical structures, enclosures, and electronic modules for multiple programs across the RMS Line of Business. This candidate will interface with Systems, Electrical Engineers, Drafting and Operations personnel in the development of detailed designs and assembly strategies. The selected candidate will work closely with cross-functional teams in the design, development, integration, and testing and...

Description: You will be the Mechanical Design Engineer Sr for an Integrated Air and Missile Defense - Advanced Programs development team. Our team is responsible for designing and producing key components of the missile system, including tactical RF sensor and structural hardware. What You Will Be Doing As the Mechanical Engineering Designer Sr, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: •Developing and generating CREO layouts and detailed model-based designs (MBD) for ICDs, components, sub-assemblies, assemblies, and integration test articles •Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM •Coordinating...

Description: What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. The Work We are seeking a Sr. Mechanical Engineer to join the Mechanical Antenna Design group in the Sensor Mechanical Design Center. In this role, the selected candidate will work as part of an engineering team to responsible for the design, analysis, verification, and production support of mechanical structures, enclosures, and electronic modules for multiple programs across the RMS Line of Business. This candidate will interface with Systems, Electrical Engineers, Drafting and Operations personnel in the development of detailed designs and assembly strategies. The selected candidate will work closely with cross-functional teams in the design, development, integration, and testing and...

Description: You will be the Mechanical Design Engineer for the ATWS (Advanced Targeting and Weapon Systems) team. Our team builds the cutting edge sensor and window hardware that powers the next generation of missile and fire control solutions at Lockheed Martin’s Orlando, FL campus. What You Will Be Doing As the Mechanical Design Engineer you will drive the creation of precision mechanical and opto mechanical prototypes, production parts, and test hardware in a fast paced, dynamic environment. You’ll work side by side with sensor, software, and production engineers to turn concepts into manufacturable, affordable hardware that meets stringent performance standards. Your responsibilities will include: • Developing 2D drawings and 3D models for sensors, windows, and sub assemblies from concept through production release. • Performing tolerance stack up analyses, trade studies, and design reviews to ensure fit, function, and cost targets are met. • Generating and releasing...

Description: What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. The Work We are seeking a Mechanical Engineer to join the Mechanical Antenna Design group in the Sensor Mechanical Design Center. In this role, the selected candidate will work as part of an engineering team to responsible for the design, analysis, verification, and production support of mechanical structures, enclosures, and electronic modules for multiple programs across the RMS Line of Business. This candidate will interface with Systems, Electrical Engineers, Drafting and Operations personnel in the development of detailed designs and assembly strategies. The selected candidate will work closely with cross-functional teams in the design, development, integration, and testing and...