50 electronics jobs found

Description: Join Our Team as a Circuit Design Engineer that enables successful manufacture, test, and delivery of critical power components for the LM2100 and LM400 satellites. As part of a central organization, our team supports a wide variety of exciting space programs and customers. This is an opportunity to provide cradle-to-grave design engineering support for critical of satellite components. Location: This position does not support teleworking ;the selected candidate will be located near our Lockheed Martin Space facility in: Littleton CO and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness...

Description: Join Our Team as a Electronics Engineer, Power Support where you will work on the development of ground power systems for Electrical Ground Support Equipment for the Orion spacecraft supporting NASA’s manned Artemis missions. Location: This position does not support teleworking ; the selected candidate will be located near our Lockheed Martin Space facility in: Kennedy Space Center FL where you will be working a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready...

Description: WHAT WE'RE DOING Provide technical support for Radar and/or Sonar programs focusing on power‑supply design and power‑subsystem engineering. The role drives reliable, high‑performance power solutions that enable mission‑critical sensor systems. THE WORK Design, analyze, and simulate power‑supply circuits, distribution networks, and power‑conversion topologies to meet system requirements. Perform root‑cause investigations and develop corrective‑action plans for power‑related issues. Build and refine engineering procedures, seeking continuous‑improvement opportunities and greater efficiency. Mentor junior engineers, sharing expertise in power‑electronics best practices and troubleshooting techniques. Collaborate closely with senior engineers, subject‑matter experts, and cross‑program teams to integrate power solutions into radar/sonar platforms. WHO WE ARE Lockheed Martin is an equal‑opportunity employer that values diversity, integrity, and innovation. Our...

Description: Join Our Team as an Senior Staff Electronics Engineer / Responsible Systems Engineer where you will lead development of sophisticated electronics products in a world class Integrated Product Team. Location: This position does not support teleworking ;the selected candidate will be located near our Lockheed Martin Space facility in: King of Prussia PA and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and...

Description: Role Overview: As an Electro-Mechanical Technician, you will build and test hardware used in aerospace and space systems. This is a hands-on role focused on assembling, modifying, and troubleshooting high-reliability components that support critical missions. Key Responsibilities: • Assemble mechanical, electrical, and electromechanical hardware • Fabricate, bond, solder, and build components using detailed instructions • Disassemble, modify, rework, and test assemblies • Read and follow engineering drawings, schematics, and wiring diagrams • Perform both repetitive and custom assembly tasks with precision • Troubleshoot issues and support corrective actions with engineering and quality teams • Identify and help resolve production or process issues • Follow safety, training, and quality standards in a regulated environment • Support production schedules, including shift work and overtime as needed Work Environment: • Hands-on manufacturing and fabrication...

Basic Qualifications Requires a Bachelor’s degree in Electrical Engineering, or a related Science, Engineering or Mathematics field.    CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Key Responsibilities: Support design and analysis of AC-DC and DC-DC power systems under guidance of senior engineers Assist with integration, testing, and troubleshooting of electrical hardware Develop test procedures and documentation for power electronics validation Perform component research and support trade studies for power system solutions Design cable assemblies and support PCB development efforts...

Description: You will be the Senior Circuit Design Engineer for the Command Launch Assembly (CLA) Carrier Card Assembly (CCA) team within Missiles & Fire Control (MFC). Our team delivers the high performance electronic hardware that powers the Next Generation Short Range Interceptor (NGSRI) and other precision engagement systems for the United States and allied forces. What You Will Be Doing As the Senior Circuit Design Engineer you will own the end to end design of the CCA, translating system requirements into reliable, production ready circuit cards that power, communicate with, and integrate into the launcher’s subsystems. You will work hand in hand with mechanical, electrical, and systems engineers, perform verification and validation, and ensure every design meets rigorous power conditioning, signal integrity, and environmental standards. Your responsibilities will include: • Defining performance, power, and interface requirements for the CCA and documenting them in...

Description: What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. The Work We are seeking a Sr. Mechanical Engineer to join the RF & Microwave Packaging & Analysis group in the Sensor Mechanical Design Center. In this role, the selected candidate will work as part of an engineering team to develop electro-mechanical packaging concepts for elements of large scale radars or airborne systems. This candidate will interface with Systems, Electrical Engineers, Drafting and Operations personnel in the development of detailed packaging designs and assembly strategies. The candidate will also work on advanced microelectronics technologies in support of low-SWaP (Size Weight, and Power) solutions to meet Lockheed Martin sensor and mission needs. The...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary: SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. The local Middletown office supports automated test equipment design, printed circuit board design (PCB), cable design, and acoustic system design. Support can vary from Research & Development to Production Support tailoring both skills and interests of the prospective employee to fill the role. Location: Work is performed on-site work at 28 Jacome Way, Middletown, RI, and/or...

Description The Entry-Level System Integration Technician will primarily assist with basic assembly, fabrication, and system support tasks while learning new skills on the job. Training and mentorship will be provided to ensure candidates grow and advance in the role. Responsibilities: Assist with the fabrication and assembly of components using basic hand and power tools. Perform basic tasks such as wiring, soldering, and packaging under the guidance of experienced team members. Learn and adhere to quality standards for assembly and fabrication. Support installation of systems and modifications, both in the workshop and at field locations. Occasional travel may be required. Read and follow technical instructions, such as mechanical and electrical drawings. Maintain a clean and safe work environment. Qualifications Education: High School Diploma or equivalent. No prior experience required; training will be provided. Required Clearance: Must possess or...

Basic Qualifications Bachelor's degree in Mechanical Engineering, or a related Science, Engineering or Mathematics field, plus a minimum of 2 years of relevant experience; or Master's degree, plus 6 months relevant experience.   CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As a senior mechanical engineer for regional strike, you'll be a member of a cross functional team working on projects that support some of our nations fundamental defense services. GDMS employees work closely with esteemed customers to develop solutions that...

Description: You will be the Mechanical Design Engineer Sr for an Integrated Air and Missile Defense - Advanced Programs development team. Our team is responsible for designing and producing key components of the missile system, including tactical RF sensor and structural hardware. What You Will Be Doing As the Mechanical Engineering Designer Sr, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: •Developing and generating CREO layouts and detailed model-based designs (MBD) for ICDs, components, sub-assemblies, assemblies, and integration test articles •Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM •Coordinating...

Description: You will be the Senior ElectroMechanical Engineer on the Advanced Programs hardware engineering team within Lockheed Martin Missiles & Fire Control (MFC). Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries. You’ll work on cutting edge electronics packaging, hands on prototype builds, production support, and technical leadership that directly impact next generation missile and radar programs. What You Will Be Doing As the Senior ElectroMechanical Engineer you will act as a key technical contributor on one or more defense programs, guiding hardware from concept through low rate production and full rate manufacturing. You’ll lead cross functional teams, create detailed electromechanical models and drawings, define test criteria, and drive issue resolution while mentoring junior engineers and championing an inclusive, collaborative culture. Your responsibilities will include: • Lead...

Description SAIC is seeking a Senior Electrical Engineer for our customer site in North Charleston, SC . Roles/Responsibilities: (include, but are not limited to) Develop a modular, power distribution architecture for distributed maritime sensors Integrate voltage-level negotiation for subsystems (similar to that of USB-C PD) Incorporate renewable energy solutions such as wave harnessing, solar, peltier into a system architecture for improved persistence Perform power budget analysis to inform power system and support sensing, communication, and edge processing operations of complex systems Develop designs for signal/power PCBs using best practices for trace routing, thermal management, signal isolation, and grounding Qualifications Required Education: Bachelor's degree and nine (9) years of experience Relevant Background/Experience: Development of DC power distribution architectures Experience programming...

Description: You will be the Electromechanical Design Engineer for the Common Command Flight Termination System (FTS) team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ESAF (Electronic Safe and Arm Fuze) packaging that will serve as the common ESAF backbone for every new FTS. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ESAF • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials,...

Description: You will be the Electromechanical Design Engineer for the Missile & Radar Electronics Packaging team. Our team delivers rugged enclosures, chassis, cold plates, card guides, wedge locks, and interconnect assemblies that enable high performance missile and radar hardware to operate reliably in demanding environments. What You Will Be Doing As the Electromechanical Design Engineer you will create and mature the mechanical and thermal solutions that marry the electronics to their protective structures. You’ll partner with circuit card designers, suppliers, and manufacturing partners to turn concepts into production ready hardware. Your responsibilities will include: • Developing detailed 3 D models and 2 D drawings in PTC Creo (ASME Y14.5/GD&T) and maintaining configuration control in Windchill (PDM/PLM). • Coordinating with circuit card designers to verify that CCA form factors, component heights, and connector placements fit the mechanical chassis and...

Description: You will be the Senior ElectroMechanical Engineer on the Advanced Programs hardware engineering team within Lockheed Martin Missiles & Fire Control (MFC). Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries. You’ll work on cutting edge electronics packaging, hands on prototype builds, production support, and technical leadership that directly impact next generation missile and radar programs. What You Will Be Doing As the Senior ElectroMechanical Engineer you will act as a key technical contributor on one or more defense programs, guiding hardware from concept through low rate production and full rate manufacturing. You’ll lead cross functional teams, create detailed electromechanical models and drawings, define test criteria, and drive issue resolution while mentoring junior engineers and championing an inclusive, collaborative culture. Your responsibilities will include: • Lead...

Description: You will be the Senior Circuit Design Engineer for the Non Kinetic Air Defense (NKAD) & Counter Swarm team. Our team designs, prototypes, tests, and rapidly fields advanced electronic solutions that protect U.S. and allied forces. We turn high risk concepts into flight ready hardware on accelerated schedules. What You Will Be Doing As the Senior Circuit Design Engineer you will be responsible for leading end to end circuit card development—from early architecture through production release—while collaborating with system, software, test, and manufacturing partners. You will help shape the technical direction of multiple defense programs and ensure that every design meets strict SWaP C, performance, and reliability requirements. Your responsibilities will include: • Defining subsystem requirements, conducting trade studies, and establishing architecture for platform and sensor electronics. • Driving schematic capture, EPCAD layout, and signal integrity...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary : SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. The local Middletown office supports automated test equipment design, printed circuit board design (PCB), cable design, and acoustic system design. Support can vary from Research & Development to Production Support tailoring both skills and interests of the prospective employee to fill the role. Location : Work is performed on-site work at 28 Jacome Way, Middletown, RI,...

Description Description SAIC is seeking a motivated and detail-oriented Electrical Engineer to join our team in Panama City Beach Florida. You will be working in a dynamic environment at our Holley Engineering and Integration Center supporting rapid development, prototyping, and production of cutting-edge adaptive warfare technologies. The ideal candidate will demonstrate a balance of technical expertise, problem-solving skills, and a collaborative mindset, with experience in handling mid-level engineering responsibilities. This role will support equipment design, cable design, system design, testing and troubleshooting. Support can vary from Research & Development to Production Support. The program focuses on asymmetric and adaptive warfare systems designed to provide flexible, cost-effective solutions for various asset types and modalities. It supports accelerated development and fielding of various technologies to address emergent warfighter requirements. Key...