49 software engineer jobs found

Description: You will be the Staff Safety Engineer for the Lockheed Martin Missiles & Fire Control Environmental Safety and Health team. Our team is responsible for ensuring safety compliance and risk mitigation across all programs at the Missiles and Fire Control facility in Troy, Alabama. What You Will Be Doing As the Staff Safety Engineer you will be responsible for hands‑on engagement with equipment, support staff, and processes while analyzing new technologies to identify risks and implement mitigation strategies to ensure compliance with ordnance safety requirements and to protect employees from potential hazards. You'll be expected to be hands on with daily interaction in the production manufacturing areas. Your responsibilities will include, but are not limited to: Troubleshooting safety-related process equipment Identifying and assessing equipment and process risk through regular onsite inspections and meetings Working with data tracking...

Description: You will be the Senior Circuit Design Engineer for the Non Kinetic Air Defense (NKAD) & Counter Swarm team. Our team designs, prototypes, tests, and rapidly fields advanced electronic solutions that protect U.S. and allied forces. We turn high risk concepts into flight ready hardware on accelerated schedules. What You Will Be Doing As the Senior Circuit Design Engineer you will be responsible for leading end to end circuit card development—from early architecture through production release—while collaborating with system, software, test, and manufacturing partners. You will help shape the technical direction of multiple defense programs and ensure that every design meets strict SWaP C, performance, and reliability requirements. Your responsibilities will include: • Defining subsystem requirements, conducting trade studies, and establishing architecture for platform and sensor electronics. • Driving schematic capture, EPCAD layout, and signal integrity...

Description: You will be the Mechanical Design Engineer for an Air Dominance program. Our team is responsible for producing design key components of the missile system and associated test equipment. What You Will Be Doing As the Mechanical Design Engineer you will be responsible for the design, development and improvement to mechanical fixtures for production test. They will also work with a cross-functional team to conduct Environmental Stress Screening (ESS) surveys and perform the required analysis to implement during functional testing. This position supports the Air Dominance Weapon System program in Orlando, FL. Your responsibilities will include: •Developing and generating CREO layouts and detailed drawings for mechanical fixtures used in the production test environment •Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM •Supporting & upgrading test equipment hardware designs for unit under test (UUT) fixturing •Support...

Description: You will be the Mechanical Design Engineer Sr for an Air Dominance program. Our team is responsible for producing design key components of the missile system and associated test equipment. What You Will Be Doing As the Mechanical Design Engineer Sr you will be responsible for the design, development and improvement to mechanical fixtures for production test. They will also work with a cross-functional team to conduct Environmental Stress Screening (ESS) surveys and perform the required analysis to implement during functional testing. This position supports the Air Dominance Weapon System program in Orlando, FL. Your responsibilities will include: •Developing and generating CREO layouts and detailed drawings for mechanical fixtures used in the production test environment •Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM •Supporting & upgrading test equipment hardware designs for unit under test (UUT) fixturing...

Description: You will be the Senior Process Safety Engineer for the Environmental Safety and Health team. Our team is responsible for ensuring safety compliance and risk mitigation across all programs at the Troy, Alabama Missiles and Fire Control facility. What You Will Be Doing As the Senior Process Safety Engineer, you will analyze new processes and technologies to identify risks, implement mitigation strategies to ensure compliance with ordnance safety requirements, and protect employees from potential hazards. You'll be expected to be hands on with daily interaction in the production manufacturing areas. Your key responsibilities will include, but are not limited to: Troubleshooting safety-related process equipment, identifying and assessing equipment and process risk through regular onsite inspections and meetings Working with data tracking and engineering software reviewing engineering drawings for hazards and risks Reviewing Manufacturing...

Description SAIC is seeking a motivated and detail-oriented Mechanical Engineer to join our team in Panama City Beach, Florida. You will be working in a dynamic environment at our Holley Engineering and Integration Center supporting rapid development, prototyping, and production of cutting-edge adaptive warfare technologies. The ideal candidate will demonstrate a balance of technical expertise, problem-solving skills, and a collaborative mindset, with experience in handling mid-level engineering responsibilities. This role will support mechanical equipment design, system design, testing, and troubleshooting. Support can vary from Research & Development to Production Support. The program focuses on asymmetric and adaptive warfare systems designed to provide flexible, cost-effective solutions for various asset types and modalities. It supports accelerated development and fielding of various technologies to address emergent warfighter requirements. Key Responsibilities:...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary : SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. The local Middletown office supports automated test equipment design, printed circuit board design (PCB), cable design, and acoustic system design. Support can vary from Research & Development to Production Support tailoring both skills and interests of the prospective employee to fill the role. Location : Work is performed on-site work at 28 Jacome Way, Middletown, RI,...

Description SAIC is seeking a highly skilled and experienced Senior Mechanical Engineer to join our team in Panama City Beach, Florida. You will lead projects in a dynamic environment at our Holley Engineering and Integration Center, supporting rapid development, prototyping, and production of cutting-edge adaptive warfare technologies. The ideal candidate will demonstrate a high level of technical expertise, advanced problem-solving skills, leadership capabilities, and a collaborative mindset. This role will lead mechanical equipment design, system design, testing, and troubleshooting efforts, with support needs spanning from Research & Development to Production Support. The program focuses on asymmetric and adaptive warfare systems designed to deliver flexible, cost-effective solutions for various asset types and modalities. It supports accelerated development and fielding of technologies to address emergent warfighter requirements. Key Responsibilities: Lead mechanical...

Description Description SAIC is seeking a motivated and detail-oriented Electrical Engineer to join our team in Panama City Beach Florida. You will be working in a dynamic environment at our Holley Engineering and Integration Center supporting rapid development, prototyping, and production of cutting-edge adaptive warfare technologies. The ideal candidate will demonstrate a balance of technical expertise, problem-solving skills, and a collaborative mindset, with experience in handling mid-level engineering responsibilities. This role will support equipment design, cable design, system design, testing and troubleshooting. Support can vary from Research & Development to Production Support. The program focuses on asymmetric and adaptive warfare systems designed to provide flexible, cost-effective solutions for various asset types and modalities. It supports accelerated development and fielding of various technologies to address emergent warfighter requirements. Key...

Description: What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. The Work We are seeking a Sr. Mechanical Engineer to join the Mechanical Antenna Design group in the Sensor Mechanical Design Center. In this role, the selected candidate will work as part of an engineering team to responsible for the design, analysis, verification, and production support of mechanical structures, enclosures, and electronic modules for multiple programs across the RMS Line of Business. This candidate will interface with Systems, Electrical Engineers, Drafting and Operations personnel in the development of detailed designs and assembly strategies. The selected candidate will work closely with cross-functional teams in the design, development, integration, and testing and...

Basic Qualifications Candidates should demonstrate a thorough understanding of engineering technology.  Engineering Interns must be enrolled in an accredited degree program in Computer Engineering, Systems Engineering, Software Engineering, Electrical Engineering, Mechanical Engineering or other related scientific or technical discipline with a preference for a standing of a sophomore or higher.     Preferred Education: Currently pursuing a degree in Mechanical or Aerospace Engineering (other engineering disciplines will also be considered) Preferably candidate should be entering at least their junior year in the fall   Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position REPRESENTATIVE DUTIES AND TASKS: Apply your classroom-learned skills to programs supporting the defense of our country. GDMS has an immediate opening for an Environmental Test...

Description: You will be the Circuit Card Design Engineer on the ADSWAP CN program. Our team delivers mission critical power electronics for advanced defense systems, driving schematic capture, EPCAD layout, and full cycle Design Assurance for high reliability circuit card assemblies. What You Will Be Doing As the Circuit Card Design Engineer you will own end to end design—from initial concept through layout, verification, and release—ensuring each design meets power distribution, EMI, grounding, isolation, and environmental requirements. You will work side by side with mechanical, software, and test engineers to accelerate procurement and test cycles while providing complete design data packages for Design Assurance reviews. Your responsibilities will include: • Capture schematics and produce EPCAD layouts using Siemens Xpedition Enterprise, applying best practice routing, signal integrity, and EMI mitigation techniques. • Develop power distribution circuit card assemblies...

Description: You will be the Circuit Card Design Engineer on the ADSWAP CN program. Our team delivers mission critical power electronics for advanced defense systems, driving schematic capture, EPCAD layout, and full cycle Design Assurance for high reliability circuit card assemblies. What You Will Be Doing As the Circuit Card Design Engineer you will own end to end design—from initial concept through layout, verification, and release—ensuring each design meets power distribution, EMI, grounding, isolation, and environmental requirements. You will work side by side with mechanical, software, and test engineers to accelerate procurement and test cycles while providing complete design data packages for Design Assurance reviews. Your responsibilities will include: • Capture schematics and produce EPCAD layouts using Siemens Xpedition Enterprise, applying best practice routing, signal integrity, and EMI mitigation techniques. • Develop power distribution circuit card assemblies...

Description: You will be the Mechanical Design Engineer for the ATWS (Advanced Targeting and Weapon Systems) team. Our team builds the cutting edge sensor and window hardware that powers the next generation of missile and fire control solutions at Lockheed Martin’s Orlando, FL campus. What You Will Be Doing As the Mechanical Design Engineer you will drive the creation of precision mechanical and opto mechanical prototypes, production parts, and test hardware in a fast paced, dynamic environment. You’ll work side by side with sensor, software, and production engineers to turn concepts into manufacturable, affordable hardware that meets stringent performance standards. Your responsibilities will include: • Developing 2D drawings and 3D models for sensors, windows, and sub assemblies from concept through production release. • Performing tolerance stack up analyses, trade studies, and design reviews to ensure fit, function, and cost targets are met. • Generating and releasing...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary: SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. SAIC is looking for someone to support the MK710 program here at the SAIC Middletown office. The job will entail a complex/detailed troubleshooting effort along with full redesign engineering effort. Location: The work will be at both 28 Jacome Way, Middletown, RI, and the Naval Undersea Warfare Center (NUWC) Division Newport. Work Schedules: Flexible work schedule...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary : SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. The local Middletown office supports automated test equipment design, printed circuit board design (PCB), cable design, and acoustic system design. Support can vary from Research & Development to Production Support tailoring both skills and interests of the prospective employee to fill the role. Location : Work is performed on-site work at 28 Jacome Way, Middletown, RI,...

Lead Mechanical Engineer Mission Out at sea, there's no margin for failure. Naval systems must operate reliably in extreme conditions, constant vibration, high heat, saltwater corrosion, and continuous operational demand. The hardware that supports these missions must be engineered not just to function, but to endure. At WR, we design and deliver the mechanical and electrical systems that protect, support, and enable critical naval technologies. From concept through deployment, our work ensures that mission-critical equipment performs exactly as expected, when it matters most. The Opportunity We're seeking a Lead Mechanical Engineer to take ownership of the design, development, and qualification of electromechanical systems supporting naval platforms. This role goes beyond design. You'll help bring systems to life. From reviewing bill of materials and developing detailed technical data packages, your work ensures that what's built can withstand the realities of...

Description: Join us at Lockheed Martin as an ElectroMechanical Engineer where you will be responsible for product design, development, and production support for the enterprise mechanical ground packaging and non-flight cable design team. Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Littleton CO and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on...

Description: Join us at Lockheed Martin as an ElectroMechanical Engineer where you will be responsible for product design, development, and production support for the enterprise mechanical ground packaging and non-flight cable design team. Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Littleton CO and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on...

Description: Join us at Lockheed Martin as an ElectroMechanical Engineer where you will be responsible for product design, development, and production support for the enterprise mechanical ground packaging and non-flight cable design team. Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Littleton CO and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on...