40 program management jobs found

Description: You will be the Senior Circuit Design Engineer for the Command Launch Assembly (CLA) Carrier Card Assembly (CCA) team within Missiles & Fire Control (MFC). Our team delivers the high performance electronic hardware that powers the Next Generation Short Range Interceptor (NGSRI) and other precision engagement systems for the United States and allied forces. What You Will Be Doing As the Senior Circuit Design Engineer you will own the end to end design of the CCA, translating system requirements into reliable, production ready circuit cards that power, communicate with, and integrate into the launcher’s subsystems. You will work hand in hand with mechanical, electrical, and systems engineers, perform verification and validation, and ensure every design meets rigorous power conditioning, signal integrity, and environmental standards. Your responsibilities will include: • Defining performance, power, and interface requirements for the CCA and documenting them in...

Description SAIC is seeking a motivated and detail-oriented Mechanical Engineer to join our team in Panama City Beach, Florida. You will be working in a dynamic environment at our Holley Engineering and Integration Center supporting rapid development, prototyping, and production of cutting-edge adaptive warfare technologies. The ideal candidate will demonstrate a balance of technical expertise, problem-solving skills, and a collaborative mindset, with experience in handling mid-level engineering responsibilities. This role will support mechanical equipment design, system design, testing, and troubleshooting. Support can vary from Research & Development to Production Support. The program focuses on asymmetric and adaptive warfare systems designed to provide flexible, cost-effective solutions for various asset types and modalities. It supports accelerated development and fielding of various technologies to address emergent warfighter requirements. Key Responsibilities:...

Description SAIC is seeking a highly skilled and experienced Senior Mechanical Engineer to join our team in Panama City Beach, Florida. You will lead projects in a dynamic environment at our Holley Engineering and Integration Center, supporting rapid development, prototyping, and production of cutting-edge adaptive warfare technologies. The ideal candidate will demonstrate a high level of technical expertise, advanced problem-solving skills, leadership capabilities, and a collaborative mindset. This role will lead mechanical equipment design, system design, testing, and troubleshooting efforts, with support needs spanning from Research & Development to Production Support. The program focuses on asymmetric and adaptive warfare systems designed to deliver flexible, cost-effective solutions for various asset types and modalities. It supports accelerated development and fielding of technologies to address emergent warfighter requirements. Key Responsibilities: Lead mechanical...

Description Description SAIC is seeking a motivated and detail-oriented Electrical Engineer to join our team in Panama City Beach Florida. You will be working in a dynamic environment at our Holley Engineering and Integration Center supporting rapid development, prototyping, and production of cutting-edge adaptive warfare technologies. The ideal candidate will demonstrate a balance of technical expertise, problem-solving skills, and a collaborative mindset, with experience in handling mid-level engineering responsibilities. This role will support equipment design, cable design, system design, testing and troubleshooting. Support can vary from Research & Development to Production Support. The program focuses on asymmetric and adaptive warfare systems designed to provide flexible, cost-effective solutions for various asset types and modalities. It supports accelerated development and fielding of various technologies to address emergent warfighter requirements. Key...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. The Stress Analysis will support the development, design reviews, and program milestones...

Description: We are seeking a Test Engineer to plan, prepare, and execute mechanical, functional, and environmental testing of development and flight aerospace mechanisms and other mechanical products at the Materials Technology & Mechanisms Test Lab at Lockheed Martin Space. In this position, you will coordinate and interface directly with program engineering, production colleagues, technicians, quality, planners, and others to support various stages of the product life cycle for aerospace mechanisms and other mechanical components and subsystems. A successful candidate is a self-starter with strong knowledge in mechanical engineering as it applies to unique test set-ups that involve load / deflection, functional / performance, thermal, and / or thermal-vacuum environments. A successful candidate has demonstrated the ability to learn and apply solutions to difficult engineering and operational challenges, via action both independently and in a team environment. This is a...

Description SAIC is seeking a qualified Mechanical Engineer to provide comprehensive mechanical engineering support for radar system designs and production engineering efforts in Crane, IN. The role encompasses collaboration with diverse stakeholders, leveraging specialized tools for design capture, analysis, modeling, and simulation while ensuring successful communication and integration of solutions within a multidisciplinary team. The selected candidate will: Develop and refine radar system designs involving cutting-edge mechanical engineering principles. Collaborate with subject matter experts (SMEs), program office personnel, fleet contacts, In-Service Engineering Agents (ISEA), and other radar systems stakeholders to gather and integrate technical requirements. Utilize advanced Mechanical Engineering drawing software and modeling tools to create and validate mechanical designs. Conduct detailed engineering analysis to ensure design robustness...

Description: Join Our Team as a Circuit Design Engineer that enables successful manufacture, test, and delivery of critical power components for the LM2100 and LM400 satellites. As part of a central organization, our team supports a wide variety of exciting space programs and customers. This is an opportunity to provide cradle-to-grave design engineering support for critical of satellite components. Location: This position does not support teleworking ;the selected candidate will be located near our Lockheed Martin Space facility in: Littleton CO and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness...

Description: You will be the Senior ElectroMechanical Engineer on the Advanced Programs hardware engineering team within Lockheed Martin Missiles & Fire Control (MFC). Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries. You’ll work on cutting edge electronics packaging, hands on prototype builds, production support, and technical leadership that directly impact next generation missile and radar programs. What You Will Be Doing As the Senior ElectroMechanical Engineer you will act as a key technical contributor on one or more defense programs, guiding hardware from concept through low rate production and full rate manufacturing. You’ll lead cross functional teams, create detailed electromechanical models and drawings, define test criteria, and drive issue resolution while mentoring junior engineers and championing an inclusive, collaborative culture. Your responsibilities will include: • Lead...

Description: Lockheed Martin Missiles and Fire Control (MFC) is seeking a Senior RF Engineer to join our growing engineering team. MFC is a recognized designer, developer, and manufacturer of precision engagement aerospace and defense systems for the U.S. and allied militaries. This role offers an excellent working environment with a mix of cutting-edge design, hands-on laboratory testing, and product development. You will work with and learn from industry-leading RF and microwave design professionals in a collaborative, mission-driven environment. What You Will Be Doing Non Kinetic Air Defense (NKAD) and Counter Swarm team is looking for an multidisciplined RF Design Engineer to join a growing team responsible for design, prototype, test and rapid fielding of solutions within highly accelerated timelines for all services. Seeking someone with experience with fast-paced programs and familiar with rapid hardware development to support design tasks that will include electrical...

Description: You will be the Environmental, Health & Safety Engineer for the Missiles and Fire Control (MFC) Ocala Environmental, Safety, and Health (ESH) department. Our team is responsible for program development, oversight, and compliance management. What You Will Be Doing As the Environmental, Health & Safety Engineer you will be responsible for driving safety and environmental excellence across MFC Ocala operations. Your responsibilities will include, but are not limited to: Develop and implement environmental and safety programs aligned with regulatory requirements. Conduct risk assessments and hazard analyses to mitigate operational risks. Monitor compliance with federal, state, and company standards. Provide training and guidance to personnel on ESH best practices. Prepare reports and documentation for audits and continuous improvement. Why Join Us The ideal candidate is collaborative, detail‑oriented, and passionate...

Description: You will be the Mechanical Design Engineer for the GMLRS Development Team. Our team drives the design, build, and test of the Guided Multiple Launch Rocket System (GMLRS) missiles and launch pods, delivering new rocket configurations and supporting supplier development across the program. What You Will Be Doing As the Mechanical Design Engineer you will be responsible for creating and releasing component and assembly drawings, drafting Instructional Change Notices (ICNs), and coordinating hardware development from concept through flight testing. You’ll work side by side with cross functional partners, the Camden manufacturing group, and external suppliers to ensure designs meet schedule, performance, and safety targets. Your responsibilities will include: • Generate and release 2 D/3 D mechanical drawings for new rocket parts and assemblies. • Author and manage Instructional Change Notices for development builds. • Participate in weekly Integrated Product Team...

Description: You will be the Electromechanical Design Engineer for the Common Command Flight Termination System (FTS) team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ESAF (Electronic Safe and Arm Fuze) packaging that will serve as the common ESAF backbone for every new FTS. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ESAF • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials,...

Description: You will be the Senior ElectroMechanical Engineer on the Advanced Programs hardware engineering team within Lockheed Martin Missiles & Fire Control (MFC). Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries. You’ll work on cutting edge electronics packaging, hands on prototype builds, production support, and technical leadership that directly impact next generation missile and radar programs. What You Will Be Doing As the Senior ElectroMechanical Engineer you will act as a key technical contributor on one or more defense programs, guiding hardware from concept through low rate production and full rate manufacturing. You’ll lead cross functional teams, create detailed electromechanical models and drawings, define test criteria, and drive issue resolution while mentoring junior engineers and championing an inclusive, collaborative culture. Your responsibilities will include: • Lead...

Description: You will be the Senior Circuit Design Engineer for the Non Kinetic Air Defense (NKAD) & Counter Swarm team. Our team designs, prototypes, tests, and rapidly fields advanced electronic solutions that protect U.S. and allied forces. We turn high risk concepts into flight ready hardware on accelerated schedules. What You Will Be Doing As the Senior Circuit Design Engineer you will be responsible for leading end to end circuit card development—from early architecture through production release—while collaborating with system, software, test, and manufacturing partners. You will help shape the technical direction of multiple defense programs and ensure that every design meets strict SWaP C, performance, and reliability requirements. Your responsibilities will include: • Defining subsystem requirements, conducting trade studies, and establishing architecture for platform and sensor electronics. • Driving schematic capture, EPCAD layout, and signal integrity...

Description: You will be the Mechanical Design Engineer for an Air Dominance program. Our team is responsible for producing design key components of the missile system and associated test equipment. What You Will Be Doing As the Mechanical Design Engineer you will be responsible for the design, development and improvement to mechanical fixtures for production test. They will also work with a cross-functional team to conduct Environmental Stress Screening (ESS) surveys and perform the required analysis to implement during functional testing. This position supports the Air Dominance Weapon System program in Orlando, FL. Your responsibilities will include: •Developing and generating CREO layouts and detailed drawings for mechanical fixtures used in the production test environment •Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM •Supporting & upgrading test equipment hardware designs for unit under test (UUT) fixturing •Support...

Description: You will be the Mechanical Design Engineer Sr for an Air Dominance program. Our team is responsible for producing design key components of the missile system and associated test equipment. What You Will Be Doing As the Mechanical Design Engineer Sr you will be responsible for the design, development and improvement to mechanical fixtures for production test. They will also work with a cross-functional team to conduct Environmental Stress Screening (ESS) surveys and perform the required analysis to implement during functional testing. This position supports the Air Dominance Weapon System program in Orlando, FL. Your responsibilities will include: •Developing and generating CREO layouts and detailed drawings for mechanical fixtures used in the production test environment •Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM •Supporting & upgrading test equipment hardware designs for unit under test (UUT) fixturing...

Description: You will be an Environmental, Safety and Health (ESH) Engineer at Lockheed Martin Missiles & Fire Control in Grand Prairie, Texas, supporting a growing campus and workforce engaged in the research, design, test, production, assembly, and transportation of precision engagement aerospace and defense systems. What You Will Be Doing As an Environmental, Safety and Health (ESH) Engineer, you will support program activities comprised of 70% Safety & Health and 30% Environmental Support as needed. Your responsibilities will include, but are not limited to: Evaluate Safety & Health programs, assess their effectiveness and identify/implement actions for continuous process improvement. Apply technical knowledge and problem-solving abilities to ESH issues, demonstrate the ability to work independently, and interact with leadership on a peer-level basis. Represent the ESH organization across multiple levels of the company and demonstrate the...

Basic Qualifications Requires a Bachelor’s degree in Systems Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience. Agile experience preferred.       CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is required at a reasonable amount of time.  Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required . Responsibilities for this Position Job Summary We are seeking a highly skilled Advanced Systems Engineer 3 to support and lead systems engineering efforts with a specialized focus on Nuclear Surety . The ideal candidate will possess extensive experience in nuclear weapons systems,...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary: SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. SAIC is looking for someone to support the MK710 program here at the SAIC Middletown office. The job will entail a complex/detailed troubleshooting effort along with full redesign engineering effort. Location: The work will be at both 28 Jacome Way, Middletown, RI, and the Naval Undersea Warfare Center (NUWC) Division Newport. Work Schedules: Flexible work schedule...