11 manufacturing engineering associate manager jobs found in Fort Worth

Description: Architects and designs Radio Frequency systems and circuitry. Designs and develops RF circuitry used in high frequency and microwave applications, including receivers, transmitters, antennas, and frequency synthesizers. Responsible for hardware layout, component evaluation, prototype construction, and test. Prepares test methods and specifications; analyzes and tests RF hardware to verify performance characteristics. Provides inputs to Product Development for formal documentation and supports manufacturing during the deliverable assembly and test phase. In addition, develops RF System/Subsystem Architectures consisting of: antennas, transmitters, receivers, low noise amplifiers, high power amplifiers, RF conversion elements and transmission line equipment. Performs link analysis and optimization, including effects of propagation medium and possible interference sources. Develops and allocates RF system and subsystem functional and performance requirements....

Description: You will be the Material Review Board Engineering ASC Manager for the Fort Worth Second‑Shift MRB team which is responsible for managing non‑conforming material across the F‑35 delivery chain. What You Will Be Doing As the Material Review Board Engineering ASC Manager you will coordinate daily tasks, provide technical guidance, and drive continuous improvement for the MRB process. You will act as the primary liaison between the MRB team, leadership, and customers to ensure timely disposition of non‑conforming material. Your responsibilities will include: Coordinate daily task assignments and ensure on‑time completion of MRB actions. Lead technical reviews, provide guidance, and approve disposition decisions. Interface with senior leadership and customers to communicate needs and status. Forecast staffing needs, drive hiring, and develop training programs for the team. Collaborate with the L5 Manager to analyze performance metrics and...

Description: This position will report to the Quality Manager of F-35 Low Observable (LO) Finishes with responsibility for supporting F-35 Product-Quality activities to support the following build areas: Component Final Finishes (CFF), Landside Final Finishes (LFF), Aircraft Finishing Facility (AFF) and Flight Line DD-250 build areas. Specific responsibilities include: Providing timely, responsive, and exceptional Quality Engineering capabilities to support LO activities throughout the entire build process spanning multiple Production Directorates, primarily in CFF, LFF and AFF. Will be expected to build and maintain professional working relationships with teams across the F-35 program including Production, DCMA, Program Management, Engineering & Technology, Material/Process/Product Engineering, Flight Sciences, and Quality & Mission Success (Q&MS) colleagues. Conduct Root Cause Corrective Action (RCCA) activities to support Action Requests (AR) from field customers,...

Description: Your Impact The 1LMX Functional Excellence Manager will oversee the OSM (Operations Systems & Modeling) functional teams responsible Organization Change Management, Testing, Metrics, App Rationalization and added scope to support the Ops and enablement teams in the successful modernization, enhancement and transformation objectives. The successful candidate will provide key role with cross-functional leaders to ensure aligned objectives, staffing and execution of work. What You Will Be Doing • Vision & Strategy Execution: Lead OSM functional team in achieving the IDE Saber 2.0 vision, ensuring MES/PLM capabilities provide measurable business value. • 1LMX Culture Drive: Champion the 1LMX culture, fostering collaboration across business areas to standardize processes, eliminate redundancies, and modernize systems. • Cross-Functional Leadership: Serve as the OSM functional leader coordinating to achieve functional metrics performance, functional testing,...

Description: You will be the Additive Manufacturing Engineering Lab Manager for the Lockheed Martin Aeronautics Additive Manufacturing Engineering Lab which is responsible for advancing additive manufacturing technologies for aerospace applications. What You Will Be Doing As the Additive Manufacturing Engineering Lab Manager you will be responsible for leading a high‑performing engineering team that partners across Lockheed Martin to transition emerging AM materials and processes into production‑ready, certifiable platforms. "Your responsibilities will include:" Lead the engineering team to develop technical roadmaps, secure research funding, and certify materials for tooling and flight hardware. Oversee operation, maintenance, safety compliance, and budgeting of two dedicated AM labs at separate facilities. Drive cross‑disciplinary collaboration and communicate progress and issues to senior leadership and customers. Provide direct engineering support...

Description: The OneLM Transformation (1LMX) effort is an internal transformation project that will change the way LM is doing business across all business areas. This includes system modernization, consolidation of Business Area processes & practices and cutting-edge IT and engineering implementation. Your Impact: Lockheed Martin Aeronautics is seeking an Operations Organizational Change Management (OCM) Coordinator who will work closely with the Aero Digital Transformation Office (DTO) OCM team, Aero cross-functional teams, IT professionals, and Enterprise Operations to ensure successful execution of all OCM activities required for rollout of the 1LMX Manufacturing Execution System (MES) Acceleration, Product Lifecycle Management (PLM), and R4 SAP S/4 across LM Aero. This role ensures Aero-wide distribution of informative communications, robust training packages, and ensure end‑users receive timely and high‑quality training at all Aero sites, and that adoption metrics are...

Description: You will be the Affordability Engineer Senior - Level 3 for the F-35 Affordability Engineering team which is responsible for delivering cost‑effective solutions across the F‑35 program. What You Will Be Doing As the Affordability Engineer Senior - Level 3 you will be responsible for driving cost‑reduction initiatives and providing strategic affordability guidance to multiple stakeholders. "Your responsibilities will include:" Integrate and execute Cost Reduction Initiatives (CRI) across Production, Sustainment, and Development business units. Advise cost‑category owners and CRI project leads on affordability processes, decision criteria, and funding options. Monitor CRI project budgets and progress, delivering technical guidance to process managers. Act as liaison among engineering, manufacturing, supply chain, suppliers, and program stakeholders. Develop expertise as a Value‑Driven Solutions Specialist supporting Aeronautics...

Description: You will be the Manufacturing Test Engineering Manager - Level 5 for the Enterprise Production Engineering team which is responsible for leading test‑equipment strategy, acquisition, and lifecycle management across Aeronautics. What You Will Be Doing As the Manufacturing Test Engineering Manager - Level 5 you will be responsible for guiding a team of Test Engineers, overseeing test‑equipment programs, and driving digital‑transformation initiatives that increase equipment availability and reduce cycle time. Your responsibilities will include: Direct staffing, hiring, onboarding, training, performance reviews, and career development for the Test Engineering team. Prioritize, schedule, and monitor test‑equipment projects to ensure on‑time, high‑quality delivery while navigating site‑specific processes and security requirements. Lead digital‑transformation efforts: evaluate emerging technologies, automate manual workflows, and integrate...

Description: Quality Engineer Staff This position will report to the Quality Manager of F-35 Low Observable (LO) Finishes with responsibility for supporting F-35 Product-Quality activities to support the following build areas: Component Final Finishes (CFF), Landside Final Finishes (LFF), Aircraft Finishing Facility (AFF) and the DD-250 build areas (aircraft touch-up and product data package preparation stage for sale to USG). Specific responsibilities include: Providing timely, responsive, and exceptional Quality Inspection capabilities to support LO activities throughout the entire build process spanning multiple Production Directorates, primarily in CFF, LFF and AFF. Will be expected to build and maintain professional working relationships with teams across the F-35 program including Production, DCMA, Program Management, Engineering & Technology, Material/Process/Product Engineering, Flight Sciences, and Quality & Mission Success (Q&MS) colleagues. Conduct Root...

Description: This Quality Engineer (QE) will report to the Quality & Mission Success manager for F-35 Wings at the Fort Worth, TX manufacturing facility. The QE will be expected to regularly review manufacturing defects for root cause and corrective action, partner with Production Operations to mitigate scrap, rework and repair generated during standard manufacturing processes, develop inspection methods as needed, and perform various analyses of quality-related data. The QE is expected to spend time on the production floor to establish process familiarity, build relationships with Production personnel, and share quality engineering knowledge with junior QEs. This position is in Fort Worth, TX à Discover Fort Worth. What’s In It For You: From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin’s comprehensive benefits package here. Do you want to be part of a company...

Description: This Quality Engineer (QE) will report to the Quality & Mission Success manager for F-35 Wings at the Fort Worth, TX manufacturing facility. The QE will be expected to regularly review manufacturing defects for root cause and corrective action, partner with Production Operations to mitigate scrap, rework and repair generated during standard manufacturing processes, develop inspection methods as needed, and perform various analyses of quality-related data. The QE is expected to spend time on the production floor to establish process familiarity, build relationships with Production personnel, and share quality engineering knowledge with junior QEs. Applies Quality principles in the areas of: design, incoming material, production control, product evaluation, program performance, reliability, inventory control, and/or research and development as they apply to product or process quality for make and/or buy products. Performs technical evaluations including product...