11 device engineer jobs found in Grand Prairie

Description: You will be the Senior ASIC & FPGA Design Engineer for the Programmable Logic Design team within Lockheed  Martin  Missiles  and  Fire  Control (MFC). Our team creates, prototypes, and fields precision engagement aerospace and defense systems for the U.S. and allied militaries, delivering cutting edge digital solutions that protect the warfighter. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will act as a technical leader on one or more defense programs, shaping the architecture, verification and integration of advanced FPGA based hardware. You will translate system level performance, safety and reliability requirements into robust programmable logic designs, while collaborating with cross functional engineers to keep the program on schedule and on budget. Your responsibilities will include: • Define architecture and design specifications for ASIC/FPGA components; write clean, maintainable RTL (VHDL, Verilog, SystemVerilog) that...

Description: Missiles and Fire Control in Orlando, Florida an opening for an experience lead test engineer. Our team is responsible for designing, integrating, and ensuring the seamless operation of test systems, and you will play a key role in providing technical support, test equipment improvements, and troubleshooting expertise. What You Will Be Doing As the ATE Test Engineer, you will be responsible for designing test consoles, interface test adapters (ITAs), test cables, and test fixtures. You will be architecting software and writing source code. You will be hands-on integrating the test system hardware, software, and device under test (DUT), then performing verification and validation of the test system. You will work with a range of technologies, including TestStand®, LabVIEW®, Matlab, and C# to control signal generation and measurement tools, conduct Environmental Stress Screening (ESS), and functional testing. Your responsibilities will include: •Designing,...

Description: You will be the Senior Manufacturing Engineer for the Precision Fires Manufacturing Engineering team. Our team is responsible for delivering advanced manufacturing solutions that drive program success. The role combines hands on, above the shop floor, program responsibilities—such as leading line validations, providing on site supplier support, and managing tooling—with higher level program tasks like affordability analyses, proposal efforts, and cross functional cost reduction initiatives. You will thrive in a fast paced environment, build strong relationships across engineering, supply chain, and operations, and develop project management expertise while advancing manufacturability, efficiency, and quality throughout the program lifecycle. What You Will Be Doing As the Manufacturing Engineer you will be responsible for bridging hands‑on production execution with strategic program initiatives. Lead Production Line Validations for the program at Lockheed...

Description: You will be the Senior Manufacturing Engineer for the Precision Fires Manufacturing Engineering team. Our team is responsible for delivering advanced manufacturing solutions that drive program success. The role combines hands on, above the shop floor, program responsibilities—such as leading line validations, providing on site supplier support, and managing tooling—with higher level program tasks like affordability analyses, proposal efforts, and cross functional cost reduction initiatives. You will thrive in a fast paced environment, build strong relationships across engineering, supply chain, and operations, and develop project management expertise while advancing manufacturability, efficiency, and quality throughout the program lifecycle. What You Will Be Doing As the Manufacturing Engineer you will be responsible for bridging hands‑on production execution with strategic program initiatives. Lead Production Line Validations for the program at Lockheed...

Description: You will be the Aeronautical / Propulsion Engineer for the Propulsion team in Grand Prairie, TX working a new development program. Our team delivers breakthrough missile propulsion solutions, driving the design, analysis, manufacturing, and testing of solid rocket motors that power today’s most demanding aerospace missions. What You Will Be Doing As the Aeronautical / Propulsion Engineer you will be responsible for leading technical oversight of a key SRM supplier, accelerating rapid development cycles, and ensuring our motors meet performance, safety, and schedule goals. You’ll work cross functionally with missile IPTs, test engineers, and production to translate system requirements into flight ready hardware. Your responsibilities will include: • Individual will be expected to manage Propulsion Integrated Product Team (IPT) with minimal guidance or oversight on daily activities. Individual will be expected to oversee propulsion programmatic and technical...

Description: You will be the Circuit Card Design Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team creates, prototypes and fields high reliability circuit card assemblies (CCAs) that power missiles, sensors and other mission critical defense systems for the United States and allied militaries. What You Will Be Doing As the Circuit Card Design Engineer you will own the end to end development of CCAs—from architecture and schematic capture through EPCAD layout, prototype build up and test. You will work hand in hand with systems, electromechanical, firmware/software and manufacturing partners to ensure every design meets performance, environmental and security requirements while keeping the program on schedule. Your responsibilities will include • Drive architecture, schematic capture and EPCAD layout for CCAs that support missile and sensor subsystems. • Define, refine and document system, performance, interface and...

Description: You will be the Circuit Card Design Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team creates, prototypes and fields high reliability circuit card assemblies (CCAs) that power missiles, sensors and other mission critical defense systems for the United States and allied militaries. What You Will Be Doing As the Circuit Card Design Engineer you will own the end to end development of CCAs—from architecture and schematic capture through EPCAD layout, prototype build up and test. You will work hand in hand with systems, electromechanical, firmware/software and manufacturing partners to ensure every design meets performance, environmental and security requirements while keeping the program on schedule. Your responsibilities will include • Drive architecture, schematic capture and EPCAD layout for CCAs that support missile and sensor subsystems. • Define, refine and document system, performance, interface and...

Description: You will be the Materials & Processes Engineer for the Advanced Structures & Systems team. Our team pioneers the development and implementation of cutting edge materials, surface treatments, and fabrication processes that enable high performance aerospace structures across major production programs. What You Will Be Doing As the Materials & Processes Engineer you will be responsible for driving material through production. You’ll apply chemistry, physics, and material behavior expertise to create robust specifications, fabrication methods, and assembly processes while partnering closely with product development, analysis, and production operations. Your responsibilities will include: • Optimizing materials and surface treatment solutions for engineering applications. • Performing failure analyses, life prediction modeling, and material property evaluation to support reliability goals. • Authoring clear technical documentation and contributing data...

Description: The HWIL Software Integration Engineer (E4) provides senior level technical leadership for the development, integration, and verification of real time, closed loop Hardware in the Loop (HWIL) simulations that combine missile hardware components with high performance software models. With 5 + years of relevant experience, the incumbent operates with technical authority, defines integration strategy, and influences program decisions while representing Lockheed Martin to senior government and industry stakeholders. Core Responsibilities • Software Architecture & Strategy - Define and evolve the software architecture for HWIL test beds, establishing standards for real time code, low latency data pathways, and deterministic execution. • Lead the development and integration of missile flight software, guidance algorithms, and sensor models into closed loop simulation environments (including 6 DOF missile dynamics). • Real Time Integration & Timing - Ensure end to...

Description: We are seeking a motivated early-career engineer to join our test engineering team. In this role, you will develop, maintain, and execute automated test systems using National Instruments LabVIEW software to validate product performance, reliability, and quality. This position offers hands-on experience integrating hardware and software for data acquisition, functional testing, and automated test sequences in a production or R&D environment. Ideal for early career engineers with 1-3 years of experience who enjoy working at the intersection of electrical/hardware systems and software development. What You Will Be Doing - Design, develop, and debug LabVIEW programs for automated testing of electronic assemblies and sensors -Create virtual instruments (VIs) for data acquisition, signal processing, instrument control, and test sequencing -Interface LabVIEW with test hardware including NI DAQ devices, PCI chassis, cRIO, oscilloscopes, power supplies,...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and seeking an experienced engineer to join our test engineering team in sunny Dallas, TX! In this role, you will develop, maintain, and execute automated test systems using National Instruments LabVIEW software to validate product performance, reliability, and quality. This position offers hands-on experience integrating hardware and software for data acquisition, functional testing, and automated test sequences in a production or R&D environment. Ideal for early career engineers with 3+ years of experience who enjoy working at the intersection of electrical/hardware...