31 electronics jobs found in Grand Prairie

Description: Test Engineering department designs and fabricates equipment that will be used in the development and manufacture of tactical hardware. We are seeking early career individuals who will be fabricating electronic, electro-mechanical assemblies (and sub-assemblies) to Engineering drawings. Daily activity would include not only a fast-paced fabrication environment, but it would also include using several computer-based programs that will update job status, Quality Inspections, and Engineering changes. Specific Job Description: Fabrication will include the ability to place and solder components on circuit cards and sub-assemblies. The fabrication of wiring harnesses will require connector pinning, de-pinning, and applying mounting hardware. In addition, these lower-level assemblies are to be built-up into single, or multi-bay cabinet assemblies, for the delivery to Engineering or Manufacturing Production areas. This position will provide the opportunity for the candidate...

Description: The primary responsibility for this role is to support the Additive Manufacturing Lab and the Innovation Center. What You Will Be Doing Candidate will work with maintaining 3D-printers and support lab engineering build of 3-D printing. This person will be required to perform all functions associated with the additive manufacturing process which includes, but is not limited to, machine operation, hands-on post-processing, specification compliance, completeness, accuracy, design soundness, interpretation of ANSI Y14.5 drawing and GD&T standards, fabrication, assembly, installation, customer interface, and data management. In addition, the candidate will support the Lockheed Martin Innovation center, which is a collaborative space outfitted with multiple capabilities including 3D printers, laser cutters, waterjet, and virtual reality equipment. The candidate will assist with maintaining equipment, helping customers use the capabilities effectively, and other...

Description: Lockheed Martin Missiles and Fire control is seeking an early career Systems Integration Engineer who will be supporting hardware and software integration for the PAC-3 Missile. The candidate will be involved in the verification and validation for new test sets as well as actively involved in missile testing throughout the life of the product. The candidate must have knowledge of electrical engineering in the areas of digital, analog, radio frequency circuit designs or electronic components. This position requires to travel to test sites Continental United States (CONUS). For CONUS activities, the candidate will travel to locations such as White Sands Missile Range, NM to support flight test and production sites in Lufkin, TX and Camden, AR to support hardware troubleshooting. Travel time can be expected to be up to 10% per year, however this number can increase or decrease based on the needs of the job. What You Will Be Doing • Support PAC-3 Missile Production and...

Description: Lockheed Martin Missiles and Fire control is seeking a Mid-career Systems Integration Engineer who will be supporting hardware and software integration for the PAC-3 Missile. The candidate will be involved in the verification and validation for new test sets as well as actively involved in missile testing throughout the life of the product. The candidate must have knowledge of electrical engineering in the areas of digital, analog, radio frequency circuit designs or electronic components. This position requires to travel to test sites within Continental United States (CONUS). For CONUS activities, the candidate will travel to locations such as White Sands Missile Range, NM to support flight test and production sites in Lufkin, TX and Camden, AR to support hardware troubleshooting. Travel time can be expected to be up to 10% per year, however this number can increase or decrease based on the needs of the job. What You Will Be Doing • Support PAC-3 Missile Production...

Description: The HWIL Engineer serves as a senior engineer, providing comprehensive expertise in the design, development, and implementation of real‑time, closed‑loop HWIL capabilities across multiple programs. With 3+ years of relevant experience, you will work under general direction, influence project objectives, and engage senior personnel on critical technical matters while independently delivering practical solutions to complex problems. What You Will Be Doing • Lead HWIL Integration: Oversee design, development, and implementation of real‑time, closed‑loop HWIL simulations (including Missile 6‑DOF models) for air vehicle software, firmware, and hardware. • System Testing & Validation: Integrate stimulation equipment, conduct verification & validation of systems and subsystems, and troubleshoot hardware/software failures using lab equipment (signal generators, DAQ, oscilloscopes, spectrum analyzers). • Debug & Diagnose: Resolve complex issues related to...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team develops cutting edge circuit boards, interface cards and supporting hardware for our customer that must meet extreme size, weight, power and performance requirements. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for the Indirect Fire Protection Capability Inc 2 (IFPC2) program. This role has an emphasis on power architecture for circuit card design. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Working within the Electrical Engineering team and cross functional teams to effectively address integration and interface challenges • Defining, refining, and documenting system, performance, and interface...

Description: Lockheed Martin Missiles and Fire Control (MFC) is seeking a motivated entry-level Electrical Engineer to join our hardware engineering team. MFC is a recognized designer, developer, and manufacturer of precision engagement aerospace and defense systems for the U.S. and allied militaries. This role is ideal for a recent graduate or early-career professional looking to develop hands-on electrical engineering skills in a collaborative, mission-driven environment. What You Will Be Doing The associate electrical engineer will support the design, development, integration, and test of electrical hardware across a variety of defense programs. Responsibilities may include: • Assisting production and development teams by resolving technical challenges, incorporating engineering changes, updating drawings and assembly parts lists, and developing new designs or tools. • Supporting circuit card assembly (CCA) design, including schematic capture, PCB layout, and design...

Description: You will be a Circuit Card Designer for the Lockheed Martin Missiles and Fire Control (MFC) team. Our team is responsible for developing cutting-edge technologies for small form factor missiles, including processor boards and interface board designs. What You Will Be Doing As a Circuit Card Designer, you will be responsible for designing and developing circuit card designs for cutting edge systems. You will work closely with electronic packaging engineers and systems engineers to ensure seamless integration. Your responsibilities will include: • Designing and developing circuit card designs for cutting edge systems • Collaborating with electronic packaging engineers and systems engineers • Creating bread board and brass board designs to fit the desired form factor • Working in a lab environment to test, evaluate, and integrate board designs • Utilizing schematic capture and board layout tools Why Join Us We're looking for a skilled and collaborative Circuit...

Description: Lockheed Martin Missiles and Fire Control in Grand Prairie, Texas is seeking a motivated Early Career Automated Test Equipment (ATE) Test Engineer to join our team. You will support Test Equipment and Test Software activities for developmental missile and launch systems. What You Will Be Doing As the ATE Test Engineer, you will be responsible for supporting test equipment hardware and software development as needed, analyzing failures associated with test equipment and providing recommended solutions, and troubleshooting and problem-solving test equipment issues. You collaborating with production teams to maintain test equipment uptime and support troubleshooting test systems, providing technical expertise, and driving improvements to test equipment and software. You will work with a range of technologies, including TestStand®, LabVIEW®, and CVI®, to control signal generation and measurement tools, conduct Environmental Stress Screening (ESS), and functional...

Description: Lockheed Martin Missiles and Fire Control (MFC) is seeking an RF Engineer to join our growing engineering team. MFC is a recognized designer, developer, and manufacturer of precision engagement aerospace and defense systems for the U.S. and allied militaries. This role offers an excellent working environment with a mix of cutting-edge design, hands-on laboratory testing, and product development. You will work with and learn from industry-leading RF and microwave design professionals in a collaborative, mission-driven environment. What You Will Be Doing The RF Engineer will support the design, analysis, test, and manufacturing of RF systems and subsystems used in challenging, high-reliability defense applications. Responsibilities may include: • Performing analysis and troubleshooting of RF circuits and modules, including amplifiers, mixers, switches, frequency generation circuits, and frequency conversion circuits • Conducting RF requirements analyses and...

Description: The HWIL Engineer serves as a senior engineer, providing comprehensive expertise in the design, development, and implementation of real‑time, closed‑loop HWIL capabilities across multiple programs. With 3+ years of relevant experience, you will work under general direction, influence project objectives, and engage senior personnel on critical technical matters while independently delivering practical solutions to complex problems. What You Will Be Doing • Lead HWIL Integration: Oversee design, development, and implementation of real‑time, closed‑loop HWIL simulations (including Missile 6‑DOF models) for air vehicle software, firmware, and hardware. • System Testing & Validation: Integrate stimulation equipment, conduct verification & validation of systems and subsystems, and troubleshoot hardware/software failures using lab equipment (signal generators, DAQ, oscilloscopes, spectrum analyzers). • Debug & Diagnose: Resolve complex issues related to...

Description: You will be an Electrical Engineer at Lockheed Martin Missiles and Fire Control (MFC), joining one of the largest networks of engineering professionals. Our team is a recognized designer, developer, and manufacturer of precision engagement aerospace and defense systems for the U.S. and allied militaries, and we're looking for a talented engineer to join our team. What You Will Be Doing As an Electrical Engineer, you will be responsible for supporting engineers from other Lockheed Martin sites in failure investigation and troubleshooting, leading failure investigation, root cause analysis, and corrective action, and providing technical disposition/recommendation for production hardware. Your responsibilities will include: • Working closely with engineering lead in providing technical oversight and monitoring of a major subcontractor and related sub tier subcontractors. • Ensuring timely resolution of technical issues related to PAC-3 missile electronics to support...

Description: Lockheed Martin Missiles and Fire Control (MFC) is seeking a Staff RF Engineer to serve as a technical authority and thought leader within our RF Engineering organization. MFC is a recognized designer, developer, and manufacturer of precision engagement aerospace and defense systems for the U.S. and allied militaries. This role is suited for an experienced RF professional who can drive technical strategy, mentor junior engineers, and shape the direction of RF capabilities across multiple programs. What You Will Be Doing Non Kinetic Air Defense (NKAD) and Counter Swarm team is looking for an multidisciplined RF/Electrical Design Deputy Lead to join a growing team responsible for design, prototype, test and rapid fielding of solutions within highly accelerated timelines for all services. The Deputy Lead will serve as a technical leader and oversee a multidisciplined team. This position will provide day-to-day interface with the Program Manager, engineering leads,...

Description: You will be the Senior Circuit Design Engineer for the Non Kinetic Air Defense (NKAD) & Counter Swarm team. Our team designs, prototypes, tests, and rapidly fields advanced electronic solutions that protect U.S. and allied forces. We turn high risk concepts into flight ready hardware on accelerated schedules. What You Will Be Doing As the Senior Circuit Design Engineer you will be responsible for leading end to end circuit card development—from early architecture through production release—while collaborating with system, software, test, and manufacturing partners. You will help shape the technical direction of multiple defense programs and ensure that every design meets strict SWaP C, performance, and reliability requirements. Your responsibilities will include: • Defining subsystem requirements, conducting trade studies, and establishing architecture for platform and sensor electronics. • Driving schematic capture, EPCAD layout, and signal integrity...

Description: You will be the Materials & Processes Engineer for the Advanced Structures & Systems team. Our team pioneers the development and implementation of cutting edge materials, surface treatments, and fabrication processes that enable high performance aerospace structures across major production programs. What You Will Be Doing As the Materials & Processes Engineer you will be responsible for driving material through production. You’ll apply chemistry, physics, and material behavior expertise to create robust specifications, fabrication methods, and assembly processes while partnering closely with product development, analysis, and production operations. Your responsibilities will include: • Developing and optimizing materials and surface treatment solutions for engineering applications. • Performing failure analyses, life prediction modeling, and material property development to support reliability goals. • Authoring clear technical documentation and...

Description: You will be a Circuit Card Designer for the Lockheed Martin Missiles and Fire Control (MFC) team. Our team is responsible for developing cutting-edge technologies for small form factor defense systems, including processor boards and interface board designs. What You Will Be Doing As a Circuit Card Designer, you will be responsible for designing and developing circuit card designs for cutting edge systems. You will work closely with electronic packaging engineers and systems engineers to ensure seamless integration. Your responsibilities will include: • Designing and developing circuit card designs for cutting edge systems • Collaborating with electronic packaging engineers and systems engineers • Creating bread board and brass board designs to fit the desired form factor • Working in a lab environment to test, evaluate, and integrate board designs • Utilizing schematic capture and board layout tools Why Join Us Do you want to be part of a company culture...

Description: You will be a Circuit Card Designer for the Lockheed Martin Missiles and Fire Control (MFC) team. Our team is responsible for developing cutting-edge technologies for small form factor defense systems, including processor boards and interface board designs. What You Will Be Doing As a Circuit Card Designer, you will be responsible for designing and developing circuit card designs for cutting edge systems. You will work closely with electronic packaging engineers and systems engineers to ensure seamless integration. Your responsibilities will include: • Designing and developing circuit card designs for cutting edge systems • Collaborating with electronic packaging engineers and systems engineers • Creating bread board and brass board designs to fit the desired form factor • Working in a lab environment to test, evaluate, and integrate board designs • Utilizing schematic capture and board layout tools Why Join Us Do you want to be part of a company culture...

Description: Lockheed Martin Missiles and Fire Control in Grand Prairie, Texas is seeking a Telemetry (TM)/Flight Termination System (FTS) electronics packaging design engineer to support development, missile integration, and flight test for an Advanced Program. Responsibilities includes: • Performing electronic packaging designs for cable harnesses and test boxes for integration and test • Supporting design, fabrication, and procurement of the TM/FTS components for the missile system • Support integration and qualification of the TM and FTS subsystems • Support the integration of the TM/FTS with the missile, including ground station interface and test support • Coordination with Range Safety Officers (RSO) and providing appropriate flight safety documentation to support flight tests • Support Flight Test Planning, Flight Test Readiness Reviews, Flight Readiness Checks, and Flight Tests at United States test locations We are committed to supporting your work-life balance and...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team develops cutting edge circuit boards, interface cards and supporting hardware for our customer that must meet extreme size, weight, power and performance requirements. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for the Indirect Fire Protection Capability Inc 2 (IFPC2) program. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Working within the Electrical Engineering team and cross functional teams to effectively address integration and interface challenges • Defining, refining, and documenting system, performance, and interface requirements • Supporting development of multiple circuit card assemblies •...

Description: You will be the Electrical Engineer for the Integrated Air & Missile Defense – Advanced Programs (IAMD AP) Long Endurance Electronic Decoy (LEED) team. Our team is racing to deliver a next generation decoy that defeats anti ship missile threats for the U.S. Navy, driving rapid hardware development across air vehicle, launcher, control electronics, and ship integration subsystems. What You Will Be Doing As the Electrical Engineer you will act as the technical backbone for the LEED program, leveraging fast paced, multidisciplinary development methods to move concepts to flight ready hardware. Your responsibilities will include: • Creating and iterating electrical schematics, PCB layouts, and wiring harnesses for the air vehicle, launcher, launch mechanism, and control electronics. • Applying mechanical design principles to ensure proper packaging, thermal management, and structural integrity of each subsystem. • Troubleshooting system issues in the lab and on...