104 systems engineer jobs found in Grand Prairie

Description: Lockheed Martin Missiles and Fire control is seeking a Mid-career Systems Integration Engineer who will be supporting hardware and software integration for the PAC-3 Missile. The candidate will be involved in the verification and validation for new test sets as well as actively involved in missile testing throughout the life of the product. The candidate must have knowledge of electrical engineering in the areas of digital, analog, radio frequency circuit designs or electronic components. This position requires to travel to test sites within Continental United States (CONUS). For CONUS activities, the candidate will travel to locations such as White Sands Missile Range, NM to support flight test and production sites in Lufkin, TX and Camden, AR to support hardware troubleshooting. Travel time can be expected to be up to 10% per year, however this number can increase or decrease based on the needs of the job. What You Will Be Doing • Support PAC-3 Missile Production...

Description: We are seeking a highly experienced Senior Staff Automated Test Engineer with deep expertise in designing and integrating Automated Test Equipment (ATE) for complex electrical systems, subsystems, and circuit card assemblies (CCAs). With 12+ years of hands-on experience, you will lead the electrical design aspects of custom ATE solutions, interface with cross-functional teams (product design, manufacturing, software/test engineers), troubleshoot production issues, and drive improvements in test coverage, reliability, and efficiency. This role involves architecting robust, production-ready test solutions in high-reliability environments. Key Responsibilities: • Lead the full-cycle electrical design of custom ATE systems, including schematics, PCB layouts, cable/interconnect drawings, fixture design (“bed of nails” or flying probe), signal conditioning circuits, switching matrices, and power distribution. • Specify, select, and integrate commercial off-the-shelf...

Description: Missiles and Fire Control in Orlando, Florida an opening for an experience lead test engineer. Our team is responsible for designing, integrating, and ensuring the seamless operation of test systems, and you will play a key role in providing technical support, test equipment improvements, and troubleshooting expertise. What You Will Be Doing As the ATE Test Engineer, you will be responsible for designing test consoles, interface test adapters (ITAs), test cables, and test fixtures. You will be architecting software and writing source code. You will be hands-on integrating the test system hardware, software, and device under test (DUT), then performing verification and validation of the test system. You will work with a range of technologies, including TestStand®, LabVIEW®, Matlab, and C# to control signal generation and measurement tools, conduct Environmental Stress Screening (ESS), and functional testing. Your responsibilities will include: •Designing,...

Description: You will be the Integration, Test, and Evaluation Engineer for our team, responsible for leading the integration, testing, and evaluation of complex systems. Our team is responsible for ensuring that integrated hardware meets physical, functional, and performance objectives. What You Will Be Doing As the Integration, Test, and Evaluation Engineer, you will be responsible for generating test procedures and plans, preparing test readiness review packages, integrating a development effort, and executing qualification testing. You will also write qualification test reports and support subcomponent and subassembly integration, as well as the build of subassembly hardware and test equipment. Your responsibilities will include: • Generating test procedures and plans • Preparing test readiness review packages • Executing qualification testing • Writing qualification test reports • Supporting subcomponent and subassembly integration • Supporting the build of subassembly...

Description: We are seeking an entry-level energetic Hardware Engineer to support the development of a COTS‑based test‑system platform that emulates tactical equipment. In this role you will design, assemble, and validate hardware using commercial off‑the‑shelf (COTS) modules while interfacing with a variety of aerospace and defense communications standards such as ARINC 429/664, CAN, RS‑232, and related signal families. You will generate and maintain accurate wiring diagrams, redline updates, and bill‑of‑materials revisions, collaborating closely with peer engineers. The position offers hands‑on experience in rapid prototyping and verification testing within a fast‑paced, high‑visibility program, providing ample opportunity for professional growth and deeper expertise in hardware architecture and integration. MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. The selected candidate must have the ability to obtain a Secret Security...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and seeking a Test Engineer for our Grand Prairie, TX site! You will be the Automated Test Equipment (ATE) Test Engineer for the Integrated Air and Missile Defense (IAMD) Line-of-Business, supporting Automated Electronic Test Equipment and Test Software activities in Grand Prairie, TX. Our team is responsible for ensuring the seamless operation of test systems, and you will play a key role in providing technical support, test equipment improvements, and troubleshooting expertise. What You Will Be Doing As the ATE Test Engineer, you will be responsible for supporting test...

Description: You will be the Senior System Safety Engineer (SSE) for the Missiles & Fire Control (MFC) Advanced Programs team. Our team safeguards every product we deliver to customers, ensuring that the warfighter is protected through rigorous safety engineering and compliance. What You Will Be Doing As the Senior System Safety Engineer you will own the development, execution, and continual improvement of system safety programs across multiple missile and fire control programs. You’ll work independently and partner with engineers, software developers, trainers, and customers to embed safety into every design decision. Your responsibilities will include: • Developing hazard analyses, safety assessments, and risk based mitigation strategies for hardware, software, training, and procedures. • Defining and applying safety criteria, ensuring they are reflected in system architecture, specifications, and test plans. • Preparing clear technical presentations, reports, and safety...

Description: About the Role: This position is for a Chief Engineering Manager for the for the Chief Engineer Development section, supporting the Lower Tier IAMD (LTIAMD) PAC-3 Command Launch System (CLS) production. Our team is responsible for providing technical leadership and support to missile production programs. What You Will Be Doing: As the Engineering & Technology Chief Engineer, you will lead technical efforts and ensure timely resolution of technical issues. You will work closely with the PAC-3 Production Chief Engineer and other members of the LTIAMD Chief Engineer staff to drive synergy across tasks and communicate lessons learned. Key Responsibilities: • Lead technical efforts and provide technical support to missile production programs • Ensure timely resolution of technical issues and exercise the right processes • Lead Failure Analysis and Failure Review Boards • Communicate technical status and issues internally and externally to program leadership, technical...

Description: You will be the Senior System Safety Engineer (SSE) for the Missiles & Fire Control (MFC) Advanced Programs team. Our team safeguards every product we deliver to customers, ensuring that the warfighter is protected through rigorous safety engineering and compliance. What You Will Be Doing As the Senior System Safety Engineer you will own the development, execution, and continual improvement of system safety programs across multiple missile and fire control programs. You’ll work independently and partner with engineers, software developers, trainers, and customers to embed safety into every design decision. Your responsibilities will include: • Developing hazard analyses, safety assessments, and risk based mitigation strategies for hardware, software, training, and procedures. • Defining and applying safety criteria, ensuring they are reflected in system architecture, specifications, and test plans. • Preparing clear technical presentations, reports, and...

Description: Lockheed Martin Missiles and Fire Control in Grand Prairie, Texas is seeking a Telemetry (TM)/Flight Termination System (FTS) electronics packaging design engineer to support development, missile integration, and flight test for an Advanced Program. Responsibilities includes: • Performing electronic packaging designs for cable harnesses and test boxes for integration and test • Supporting design, fabrication, and procurement of the TM/FTS components for the missile system • Support integration and qualification of the TM and FTS subsystems • Support the integration of the TM/FTS with the missile, including ground station interface and test support • Coordination with Range Safety Officers (RSO) and providing appropriate flight safety documentation to support flight tests • Support Flight Test Planning, Flight Test Readiness Reviews, Flight Readiness Checks, and Flight Tests at United States test locations We are committed to supporting your work-life balance and...

Description: The HWIL Electrical Design & Integration Engineer (E4) provides senior level technical leadership for the end to end electrical architecture, integration, and verification of real time, closed loop Hardware in the Loop (HWIL) capabilities. With 5 + years of relevant experience, the incumbent operates with technical authority, defines strategy, and influences program wide decisions while representing Lockheed Martin to senior government and industry stakeholders. Core Responsibilities • Technical Architecture & Strategy - Define and evolve the electrical architecture for HWIL test beds, establishing standards for cable harnesses, PCBs, high speed signaling, and RF target generation simulators. • Lead the integration of next generation real time closed loop simulation models • Program Leadership - Serve as a lead HWIL electrical engineer coordinating with cross functional teams (Systems, Software, Mechanical, Integration & Test). • Present technical...

Description: You will be the Materials & Processes Engineer for the Advanced Structures & Systems team. Our team pioneers the development and implementation of cutting edge materials, surface treatments, and fabrication processes that enable high performance aerospace structures across major production programs. What You Will Be Doing As the Materials & Processes Engineer you will be responsible for driving material through production. You’ll apply chemistry, physics, and material behavior expertise to create robust specifications, fabrication methods, and assembly processes while partnering closely with product development, analysis, and production operations. Your responsibilities will include: • Developing and optimizing materials and surface treatment solutions for engineering applications. • Performing failure analyses, life prediction modeling, and material property development to support reliability goals. • Authoring clear technical documentation and...

Description: You will be the Industrial Engineer Sr Stf (Level 5) for the Core Industrial Engineering Team. Our team is responsible for supporting 1LMX preparation and execution, leading engineering standardization across facilities, and owning roadmaps for digital integration. What You Will Be Doing As the Industrial Engineer Sr Stf (Level 5) you will be responsible for delivering high‑impact engineering solutions that enable efficient manufacturing operations. Your responsibilities will include, but are not limited to: Support all Industrial Engineering activities related to 1LMX preparation and execution. Lead standardization of time standards, Lean Six Sigma, layout optimization, and data governance across manufacturing facilities. Develop and maintain roadmaps and execution plans for engineering standardization and digital integration. Collaborate with cross‑functional teams to drive continuous improvement and ensure data integrity. Why...

Description: You will be the Quality Engineer for the Quality Engineering Team. Our team is responsible for establishing and maintaining quality systems, supporting Australian partners, and ensuring compliance with quality standards. What You Will Be Doing As the Quality Engineer you will be responsible for driving quality excellence across our programs and supplier network. Your responsibilities will include, but are not limited to: Set up new quality processes and resolve issues with suppliers and manufacturing teams. Extract and analyze data to identify trends and drive continuous improvement. Support Integrated Product Teams with quality data reviews and analysis. Lead corrective‑action meetings and program parts reviews. Conduct assessments and audits to ensure compliance with quality standards. Why Join Us The ideal candidate is a collaborative problem‑solver who thrives in a fast‑paced environment and is passionate about delivering...

Description: You will be the Quality Engineer Sr for the Quality Engineering Team. Our team is responsible for ensuring product quality, driving continuous improvement, and supporting supplier quality across Lockheed Martin production sites. What You Will Be Doing As the Quality Engineer Sr you will be responsible for leading quality initiatives that enhance production floor performance and supplier compliance. Your responsibilities will include, but are not limited to: - Collaborate with manufacturing sites to establish new processes and enforce contractual requirements. - Extract and analyze MRP data to generate actionable quality metrics and trend reports. - Lead corrective and preventive action initiatives, including parts reviews and material review boards. - Conduct audits and assessments to ensure compliance with ISO‑9001/AS9100 and engineering specifications. - Drive lean improvements to reduce waste and enhance production velocity. Why Join Us The ideal candidate...

Description: You will be the Senior Manufacturing Engineer for the Precision Fires Manufacturing Engineering team. Our team is responsible for delivering advanced manufacturing solutions that drive program success. The role combines hands on, above the shop floor, program responsibilities—such as leading line validations, providing on site supplier support, and managing tooling—with higher level program tasks like affordability analyses, proposal efforts, and cross functional cost reduction initiatives. You will thrive in a fast paced environment, build strong relationships across engineering, supply chain, and operations, and develop project management expertise while advancing manufacturability, efficiency, and quality throughout the program lifecycle. What You Will Be Doing As the Manufacturing Engineer you will be responsible for bridging hands‑on production execution with strategic program initiatives. Lead Production Line Validations for the program at Lockheed...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and looking for a GNC Engineer to join our team in Orlando, FL OR Dallas, TX. What You Will Be Doing Representative areas of responsibility include performance analysis, generation of error budgets, hardware in the loop analysis, simulation modeling, fire control algorithm development, engage-ability analysis, development and refinement of guidance laws and autopilot algorithms, flight test support, seeker algorithm and truth modeling, and conducting trade studies. The GNC Engineer will support the integration, test, verification and validation of missile algorithms. As...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and looking for a Sr GNC Engineer to join our team in Orlando, FL OR Dallas, TX. What You Will Be Doing Representative areas of responsibility include performance analysis, generation of error budgets, hardware in the loop analysis, simulation modeling, fire control algorithm development, engage-ability analysis, development and refinement of guidance laws and autopilot algorithms, flight test support, seeker algorithm and truth modeling, and conducting trade studies. The Sr GNC Engineer will support the integration, test, verification and validation of missile...

Description: You will be the Quality Engineer Staff for the Quality Engineering Team. Our team is responsible for leading Tiger Team efforts for the Precision Strike Missile (PrSM) production, driving continuous improvement initiatives, and ensuring aerospace quality standards across Lockheed Martin sites and suppliers. What You Will Be Doing As the Quality Engineer Staff you will be responsible for overseeing quality processes, coordinating cross‑functional teams, and supporting hybrid on‑site/remote operations. Your responsibilities will include, but are not limited to: Lead Tiger Team investigations to resolve production issues. Develop and execute continuous improvement projects. Collaborate with internal and external stakeholders to ensure compliance with AS9100, NADCAP, and other aerospace standards. Conduct supplier audits and support travel to production sites as needed. Maintain documentation and reporting for quality metrics. Why Join Us The...

Description: You will be the Senior Electromechanical Design Engineer for the Missiles & Fire Control (MFC) Hardware Engineering team. Our team designs, develops and manufactures precision engagement aerospace and defense systems for the United States and allied forces, delivering cutting edge electronic packaging, prototype hardware, and production ready solutions. What You Will Be Doing As the Senior Electromechanical Design Engineer you will be responsible for leading electromechanical hardware development on one or more defense programs while collaborating closely with senior leadership, production, quality and customer partners. Your responsibilities will include: • Guiding hardware teams from concept through production to ensure on time, high quality delivery. • Designing electromechanical systems for missile and radar electronics, including CCA/PWB packaging, harnesses, and enclosures. • Creating detailed 3D models, 2 D drawings, and layouts; selecting materials,...