16 systems engineering lead jobs found in Grand Prairie

Description: You will be the Electrical Engineering Principal – Seeker & Radar Simulation for the Missile Fire Control (MFC) Seeker Integration team. Our team delivers high performance seeker and radar subsystems for advanced missile programs, managing real time hardware in the loop (HITL) simulation and stimulation to validate flight critical electronics. What You Will Be Doing As the Electrical Engineering Principal you will be responsible for architecting, implementing and validating seeker technology hardware and FPGA based DRFM solutions that enable realistic radar system simulation. You will guide cross functional teams through HITL test campaigns, ensuring compliance with MFC design processes and facility requirements. Your responsibilities will include: • Leading integration of missile borne radar seekers, including hardware in the loop (HITL) simulation and stimulation using the ACTS II facility. • Designing, developing and validating FPGA based DRFM (Digital...

Description: You will be the Integrated Product Team (IPT) Lead for the Integrated Fires Protection Capability 2 (IFPC 2) Interceptor program. Our program is responsible for designing, developing and testing a next generation missile system that defends critical assets and safeguards warfighters against emerging threats. What You Will Be Doing As the IPT Lead you will spearhead a multidisciplinary engineering team—electrical, mechanical, structures, lethality, propulsion, thermal, materials, processes and environments—to deliver a complete, affordable, and producible interceptor solution. You will balance customer requirements with cost and schedule constraints, coordinate closely with the IFPC 2 Magazine team and exercise full authority over the interceptor team’s budget and schedule. Your responsibilities will include: • Providing overall technical direction and leadership for the interceptor design, development and test effort. • Managing the multidisciplinary IPT,...

Description: You will be the Senior Quality Engineer supporting an Advanced Programs development program at Lockheed Martin in Grand Prairie, TX. Our team is responsible for ensuring the quality of products and services provided by suppliers across the United States, and we're looking for a seasoned professional to lead these efforts. What You Will Be Doing As the Senior Quality Engineer, you will be responsible for performing product source inspections, first articles, and product validations at supplier locations, as well as providing internal and supplier support for root cause and corrective/preventive actions. You will work closely with suppliers, program management, and customers to ensure that quality standards are met and program requirements are fulfilled. Your responsibilities will include: - Conducting scheduled product source inspections, first articles, and product validations at supplier locations - Providing internal and supplier support for root cause and...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and looking for an RF Engineer to join our team in Grand Prairie, TX. You will join our Hardware-in-the-Loop (HWIL) Center of Excellence (COE) team in Dallas to lead the design, integration, and optimization of advanced HWIL systems. The successful candidate will be responsible for designing, calibrating, troubleshooting, operating and maintaining advanced RF HWIL systems, subsystems, and components. Additionally, they will design RF circuits, perform signal integrity measurements, analyze real-time simulation output, and manage the repair and replacement of RF subsystem...

Description: You will be the Mechanical Design Engineering Technology Manager (ETM) for the Precision Strike Missile (PrSM) Increment 1 Production Team. Our team drives the transition from design to full rate production, delivering high performance missile hardware that meets aggressive schedule and cost targets while supporting fielded systems and the USG customer. What You Will Be Doing As the ETM you will lead a technical group of 10 15 engineers, SMEs, and suppliers, partnering with program IPT leads, chief engineers, manufacturing, quality, procurement, and test facilities. You’ll own the end to end mechanical design lifecycle—creating new 3D models, updating legacy drawings, managing Technical Data Packages and Change Notices—while navigating the fast paced, concurrent development and production environment of PrSM Increment 1. Your responsibilities will include: • Direct technical oversight of the mechanical design team, ensuring design integrity, affordability, and...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and looking for a Design Verification Testing Lead Engineer for our beautiful Grand Prairie, TX site! You will be the Design Verification Testing (DVT) Lead Engineer for the RF Sensor Product Center (RFSPC) in testing across various missile flight environments, ensuring the development of reliable and robust products. This candidate will be responsible for planning, executing, and analyzing DVT activities, as well as developing a comprehensive plan for production latent manufacturing defect testing. The successful candidate will work closely with cross-functional teams,...

Description: You will be the Mechanical Design Engineer for the Precision Strike Missile (PrSM) Program. Our team designs and builds the next generation of kinetic strike missiles, turning innovative concepts into flight ready hardware. We partner with suppliers, production planners, and global supply chain partners to deliver high performance, reliable systems at a fast production rate. As the Mechanical Design Engineer you will drive the end to end mechanical development of PrSM components. You’ll create 3D models, release production ready drawings and BOMs, and act as the liaison between engineering, manufacturing, and supply chain teams. Your work will directly support missile and pod integration activities at our Camden, AR facility and help resolve tough design challenges with creative, data driven solutions. Your responsibilities will include: • Generate detailed 3D models and assemblies in CREO that meet functional, mass budget, and manufacturability requirements. •...

Description: You will be the Electrical Engineer for the Lockheed Martin Missiles and Fire Control (MFC) team. Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries, including the production of GMLRS rockets. What You Will Be Doing As the Electrical Engineer you will lead technical coordination and oversight of subsystem suppliers, translating prime contract requirements into clear guidance for our supply base. You will own your assigned subsystem, drive issues to resolution, and support the ATACMS production line. Your responsibilities will include: • Providing technical leadership and guidance to subsystem suppliers and ensuring contract requirements flow accurately to them. • Owning the disposition of hardware through Material Review Board Engineer (MRBE) processes and supporting ATACMS rocket production. • Leading weekly supplier meetings, communicating issues and status to program leadership,...

Description: We are seeking a highly experienced Staff Electrical Engineer with deep expertise in designing and integrating Automated Test Equipment (ATE) for complex electrical systems, subsystems, and circuit card assemblies (CCAs). With 7 - 12 years of hands-on experience, you will lead the electrical design aspects of custom ATE solutions, interface with cross-functional teams (product design, manufacturing, software/test engineers), troubleshoot production issues, and drive improvements in test coverage, reliability, and efficiency. This role involves architecting robust, production-ready test solutions in high-reliability environments. Key Responsibilities: • Lead the full-cycle electrical design of custom ATE systems, including schematics, PCB layouts, cable/interconnect drawings, fixture design (“bed of nails” or flying probe), signal conditioning circuits, switching matrices, and power distribution. • Specify, select, and integrate commercial off-the-shelf (COTS)...

Description: You will be the Integration, Test, and Evaluation Engineer for our team, responsible for leading the integration, testing, and evaluation of complex systems. Our team is responsible for ensuring that integrated hardware meets physical, functional, and performance objectives. What You Will Be Doing As the Integration, Test, and Evaluation Engineer, you will be responsible for generating test procedures and plans, preparing test readiness review packages, integrating a development effort, and executing qualification testing. You will also write qualification test reports and support subcomponent and subassembly integration, as well as the build of subassembly hardware and test equipment. Your responsibilities will include: • Generating test procedures and plans • Preparing test readiness review packages • Executing qualification testing • Writing qualification test reports • Supporting subcomponent and subassembly integration • Supporting the build of subassembly...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for a Flight Termination System (FTS). You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for a FTS • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing schematics and...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for the Next Gen Short Range Interceptor (NGSRI) program. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for the Guidance Electronic Components Assembly (GECA). • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for the Next Gen Short Range Interceptor (NGSRI) program. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for the Guidance Electronic Components Assembly (GECA). • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and...

Description: You will be the Circuit Card Design Engineer for the Missile & Fire Control (MFC) – Next Gen Short Range Interceptor (NGSRI) team. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems running reliably in harsh, radiation rich environments. What You Will Be Doing As the Circuit Card Design Engineer you will lead the architecture, schematic capture, and layout of multiple circuit card assemblies for the NGSRI Guidance Electronic Components Assembly (GECA). You will partner with cross functional engineers to drive designs through the Design Assurance process, from concept through procurement and test. Your responsibilities will include: • Developing and refining system, performance, interface, and environmental requirements for GECA circuit cards. • Capturing schematics and coordinating with EPCAD for layout and signal routing optimization. • Conducting trade studies to evaluate design options and...

Description: You will be the Supplier Quality Field Representative Staff for the Missiles and Fire Control team. Our team is responsible for ensuring the quality of products from suppliers across the United States, implementing quality control processes, and driving supplier performance excellence. What You Will Be Doing As the Supplier Quality Field Representative Staff you will be responsible for collaborating with internal stakeholders and suppliers to meet quality standards, conducting on‑site assessments, and identifying areas for improvement. Your responsibilities will include, but are not limited to: -Conducting on‑site audits and assessments at supplier facilities -Collaborating with internal stakeholders to develop and implement quality control processes -Working with suppliers to identify and address quality issues -Developing and implementing corrective actions to ensure supplier compliance -Building and maintaining strong relationships with suppliers...

Description: You will be the Manufacturing Engineer Sr for the Precision Fires Manufacturing Engineering team. Our team is responsible for ensuring the successful production of complex systems. What You Will Be Doing As the Manufacturing Engineer Sr you will be responsible for driving program excellence above the shop‑floor capacity, leading production‑line validations, creating and maintaining Manufacturing Bills of Material (MBOMs), and advancing manufacturing excellence at our make sites and suppliers. Your responsibilities will include, but are not limited to: Develop or mature manufacturing readiness assessments and create manufacturing plans. Conduct make‑or‑buy analyses. Present at design and manufacturing reviews. Transition new or revised designs from development to production. Identify production risks and implement mitigation plans. Why Join Us The ideal candidate is a collaborative, results‑driven engineer who thrives on...